2”
x 2” x 11 gage (.120”) Steel tube Sides of swing gates,
Bottom Of Slide Gates 2” x 2” x 14 gage (.083”)
Steel tube Remaining frame
1” x 2” x 14 gage (.083) Steel Tube Crossbars on a few
designs
3/4” x 14 gage (.083”) Rec. Tubing all pickets
All pickets are spaced 4 1/2” O.C. as per code
Scroll is fabricated using 1/4” x 1 1/4” solid bar
(There are exceptions such as model PA4 which uses square solid
bar ranging from 1/2”, 5/8” or 3/4” thickness
dependant on the size of the gate)
All Panel is 14” (.083”) thickness
All wheel boxes on slide gates are 4” made from 11 gage .120: |
Samples
of Stock Gate Designs |
