Steel Gate Accessories & Hardware
Posts	Skeletons	Goosenecks	Garden Gates

Hardware

Gate Fitting Info

Gate Specifications

Important Information - Please Read:
All designs come as swing gates. All designs can be converted to slide gates by adding wheels. We are now producing a line of our finest steel gates for sale nationwide. The designs and material specifications are top end high quality. Our firm has a reputation for creating some of the finest gates in the world. Until now they have been priced out of reach for many people. Please have a look at the specifications for these gates and you will see the detail and quality that has become our benchmark.

Gates weigh 350 - 500 lbs. and feature German "Interpon" powder coat finish done in a factory certified facility. Most gates have galvanized undercoat. All scrolls have hot forged splayed and textured ends. All artwork is three dimensional. Vines are hand textured and tapered. All artwork is hand painted over the powder coat finish.

PLEASE READ THIS IMPORTANT GATE MEASUREMENTS NOTE BEFORE PURCHSING YOUR GATE:
•Bi-Parting gates may vary in size from one leaf to the other by up to 1/4".
•Single gates purchased two at a time to be installed as one bi-parting gate usually will not match in height and may vary from one another by up to 1".
•Before installing your posts in concrete be sure to measure your single or bi-parting gate first to ensure it is square. Measure first from corner to corner and then each end from top to bottom. They should not be off by more than 1/4" to 1/2".