FAAC
Linear Arm Gate Operators |
|
|
For
more product options click on the manufacturer's name |
|
|
|
|
 |
FAAC
402 CBC Linear Arm Gate Operator.
• 10' wide x 900 lbs
• 115VAC
• Speed: 12 seconds to 90°
• Opens inward or outward
• Emergency Key Release
• Dimensions: H:3-1/2" - W:3-1/2" - L:36"
• Shipping weight: Single 54-lbs. Dual: 83-lbs.
• 2-year warranty |
Single $1325.00
Dual $2045.00
|
|
Positive
Stops for the FAAC 402 - Requires 1 for each arm
• Model
80 Internal Positive Stop |
$110.00
|
 |
FAAC
412 Electromechanical Swing Gate Operator
• 14' wide x 500 lbs.
• 115VAC
• Speed: 13 seconds to 90°
• Opens inward or outward
• Emergency Key Release
• Dimensions: H: 7.5" - W: 2-375" - L:39.25"
• Shipping weight: Single: 50 lbs. Dual: 80 lbs.
• 2-year warranty |
Right hinged single - $980.00
Left hinged single - $980.00
Dual - $1415.00
|
|
Positive Stops for the FAAC
412 - Requires 1 for each arm
• Model
80 Internal Positive Stop - comes in right or left handed
|
Right
hand model 80 - $100.00
Left hand model 80 - $100.00
|
|
FAAC
400 CBAC Linear Arm Gate Operator.
• 23' wide x 2000 lbs
• 115VAC
• Speed: 17 seconds to 90°
• Opens inward or outward
• Emergency Key Release
• Dimensions: H:3-5/16" - W:3-5/16" - L:40"
• Shipping weight: Single 54-lbs. Dual: 83-lbs.
• 2-year warranty |
Single $1630.00
Dual $2575.00
|
|
FAAC
400 Internal Positive Stop
• 4-rod internal stop
• Required for each FAAC
400 (Standard) Actuator |
$114.00
|
Safety
Loops and Loop Detectors
|
|
FAAC
DSP 15 Plug in Loop Detector
• 2 year limited warranty
Note: Order one for the safety loops and one
for the exit loop. Be sure to set the Loop Detectors to different
frequencies. |
$150.00
|
 |
Driveway
Loop Cut-In Kit
• For loop installation in an existing asphalt or concrete
driveway.
• Requires a circular saw with a masonry blade and a calking
gun.
• Kit does not include twisted pair wire to connect to operator.
See below for wire.
Note: Order two for safety loops and one for
exit loop. |
4'x6' $75.00
4'x8' $85.00
4'x10' $100.00
|
 |
EMX
Lite Preformed Loop
• Applications: Saw cut, Poured concrete, Resurfaced asphalt.
• Lightweight preformed loop.
• Overall diameter of 0.26 inches.
• Comes standard with 50 feet of twisted and jacketed lead-in
wire.
• 2 Year limited Warranty
Note: Order two for safety loops and one for
exit loop. |
4x6 $96.75
4x8 $102.95
4x10 $107.00
|
 |
AGW
PerForm Preformed Loop Low Temperature
• Applications: Direct burial
in earth & gravel roads, Poured concrete.
• Overall diameter of 0.5 inches.
• Comes standard with 50 feet of twisted and jacketed lead-in
wire.
• 3 Year limited Warranty
Note: Order two for safety loops and one for
exit loop. |
4x6 $105.00
4x8 $115.00
4x10 $125.00
|
Exit
Probes
Can be used in place of the exit loop and loop detector |
|
EMX
CarSense 202 Driveway Sensor. Probe Style
Loop Detector Self Contained. 9- 35 Volt AC/DC
10 MA Standby current. Great for solar powered gates.
CS 202-50 With 50' length
lead wire
CS 202-100 With 100' length lead wire
EMX
CarSense 101 Driveway Sensor. Probe Style
Loop Detector Kit with separate detector module.
CS 101-24AC-50 24 VAC With 50' length lead wire
CS 101-24AC-100 24 VAC With 100' length lead wire
|
|
Remote
Controls |
 |
MultiCode
109950 One Channel Receiver 300 MHz & 310 MHz.
• 12-24 Volts AC or DC
• Auto voltage sensing
• Single relay model
• Supplied with whip antenna, three feet of coaxial cable,
and bulkhead connector. |
$45.00
|
 |
MultiCode
308911 1 Button 1 Channel Transmitter
• Compatible with MultiCode 19950 Receiver
• 300 MHz Frequency
• 10 Dip Switch
• Uses 9 Volt battery (supplied)
• One Year Warranty |
$12.95
|
 |
MultiCode
307010 1 button 1 Channel Micro Transmitter
• Compatible with MultiCode 19950 Receiver
• 300 MHz Frequency
• 10 Dip Switch
• 12 Volt battery Included
• Size: 2.5"x1.25"
• One Year Warranty |
$18.95
|
| |
MultiCode
106603 External Antenna Kit
• Has 15' cable.
• Great for increasing the range of your handheld gate opener
transmitters.
• Can be used with most brands of radio receivers
|
$35.00
|
|
MultiCode
420001 Wireless Keypad
• Compatible with MultiCode 19950 Receiver
• 10 Dip Switch
• 300 MHz Frequency
• One Year Warranty
• 9 Volt battery Included
• Backlit Keypad
• Weatherproof |
$35.00
|
Keypad |
 |
Linear
AM-KP Keypad
• Compatible with the Linear RE-1 Telephone Entry System
• 1-8 digit access codes
• Pedestal or wall mounted
• 12VDC
• Static & lightning protection
• 4"w x 5.5"h x 3"d |
$190.00
|
Telephone
Entry System |
|
Linear
RE-1 Telephone Entry System
• Full-featured telephone with intercom modes
• Built-in wireless318 MHz MegaCode radio & antenna
• Voice prompts
• Capacity for 100 entry codes
• Computer programmable
• 16 VAC transformer included |
$755.00
|
 |
Linear
Re-1 Black & White Camera
• Field upgradeable
• Receives power from RE-1
• Infrared illuminators
• 2 year limited warranty |
$228.00
|
|
Linear
MT-1B One Channel Block Coded Transmitter
• Compatible with Linear RE-1 TES
• Block Coded
• 318 MHz MegaCode
• 9 Volt battery Included |
$21.95
|
Gooseneck |
|
Linear Standard Pad Mount Gooseneck
- 42" tall
LInear Standard Post Hole Mount
Gooseneck - 64" tall |
$150.00
|
Wire |
 |
Wire
by the Foot
• Belden 8444 - 4/22 - 4 Conductor 22 Gauge - $0.49
• Belden 8461 - 1 pair twisted 18 gauge - $0.34
• Cat 5 Wire - $0.26
• DoorKing InterConnect Cable - 2600-755 30-ft roll - $40.95
• 18 Gauge Jacketed Pair - $0.20
• 18 Gauge Loop Wire - Aircraft Grade - $0.42
• RG-6 Shielded Coax Cable - $0.20
• Siamese Cable - $0.41 |
|
| |
|
|
