Elite
Slide Gate Operators |
|
|
For
more product options click on the manufacturer's name |
|
|
|
|
|
|
Elite
RoboSlide Gate Operator
• 20' wide x 800 lbs.
• 12 VDC Motor 115VAC
• Operates off low voltage transformer
or solar panel.
• Battery backup operation
• 10 feet #41 Chain
• Not compatible with Elite A-ELD Loop Detector - Use EMX
Loop Detector & Harness
• Shipping Weight 104-lbs.
• 3-year warranty
Can be used in solar installations |
$1246.00
|
 |
Elite
Q203 RoboSwing/RoboSlide Auxiliary Module.
• Used to connect two units in
Master/Slave configuration
• Also used for adding magnetic
locks and shadow loops to installation.
Note: Purchase 2 units for Master/Slave |
$52.00
|
 |
Elite
SL-3000 Slide Gate Operator.
• 37' wide x 1000 lbs
• 1/2HP 120VAC
• 25' of #41 chain
• Opens by hand crank in emergency
• Shipping weight: 160-lbs.
• 5-year warranty |
$1479.00
|
|
Elite
SL-3000-DM SlideGate Operator.
• 37' wide x 1000 lbs
• Two 1/2 HP Motors (in series)120VAC
• 25' of #41 chain
• Opens by hand crank in emergency
• Shipping weight: 160-lbs.
• 5-year warranty |
$1723.00
|
|
Elite
SL-3000-1HP Slide Gate Operator.
• 37' wide x 2000 lbs
• Dual 1/2 HP Motors (in tandem)120VAC
• 25' of #41 chain
• Opens by hand crank in emergency
• Shipping weight: 160-lbs.
• 5-year warranty |
|
 |
Extra
Chain for Slide Gate Operators
• 10' lengths
• Includes 1 master link
• Size 40 or 41 |
#40
$49.00
#41 $38.00
|
Photo
Eyes
For other
options visit the Photo
Eyes page |
 |
EMX
IRB-4X Infrared Photo Eye
• Up to 75 feet
• Protective hood made of anodized aluminum
|
$194.00
|
 |
EMX
P45 Infrared Photo Eye
• Up to 30 feet
• Water tight |
$70.00
|
Safety
Loops and Loop Detectors
|
|
Elite
A-ELD Plug in Loop Detector
• LED Loop Diagnostics
• Plugs directly into Control Board
Note: Order one for the safety loops and one
for the exit loop. Be sure to set the Loop Detectors to different
frequencies. |
$128.00 |
|
EMX
LP D-TEK D-Tek Vehicle Loop Detector (Viking Operators)
• 12 to 24jVAC/DC
• 9mA current draw
• Compatible with 11 pin mountable socket or wire harness.
• Tempurature range: -40F to 180F.
• 2 Year limited Warranty
Note: Order one for the safety loops and one
for the exit loop. Be sure to set the Loop Detectors to different
frequencies. |
$109.50
|
 |
EMX
HAR-11 Loop Detector Harness
• for use with EMX D-Tek Vehicle Loop Detector
• 11 pin socket with 3 feet of wire |
$9.95
|
 |
Driveway
Loop Cut-In Kit
• For loop installation in an existing asphalt or concrete
driveway.
• Requires a circular saw with a masonry blade and a calking
gun.
• Kit does not include twisted pair wire to connect to operator.
See below for wire.
Note: Order two for safety loops and one for
exit loop. |
4'x6' $75.00
4'x8' $85.00
4'x10' $100.00
|
 |
EMX
Lite Preformed Loop
• Applications: Saw cut, Poured concrete, Resurfaced asphalt.
• Lightweight preformed loop.
• Overall diameter of 0.26 inches.
• Comes standard with 50 feet of twisted and jacketed lead-in
wire.
• 2 Year limited Warranty
Note: Order two for safety loops and one for
exit loop. |
4x6 $96.75
4x8 $102.95
4x10 $107.00
|
 |
AGW
PerForm Preformed Loop Low Temperature
• Applications: Direct burial
in earth & gravel roads, Poured concrete.
• Overall diameter of 0.5 inches.
• Comes standard with 50 feet of twisted and jacketed lead-in
wire.
• 3 Year limited Warranty
Note: Order two for safety loops and one for
exit loop. |
4x6 $105.00
4x8 $115.00
4x10 $125.00
|
Exit
Probes
Can be used in place of the exit loop and loop detector |
|
EMX
CarSense 202 Driveway Sensor. Probe Style
Loop Detector Self Contained. 9- 35 Volt AC/DC
10 MA Standby current. Great for solar powered gates.
CS 202-50 With 50' length
lead wire
CS 202-100 With 100' length lead wire
EMX
CarSense 101 Driveway Sensor. Probe Style
Loop Detector Kit with separate detector module.
CS 101-24AC-50 24 VAC With 50' length lead wire
CS 101-24AC-100 24 VAC With 100' length lead wire
|
|
Remote
Controls |
 |
LiftMaster
371LM 315 MHz Transmitter
• Compatible with receiver installed in Elite Swing
Arm Operators
• One button |
$22.00
|
 |
LiftMaster
372LM 315 MHz Transmitter
• Compatible with receiver installed in Elite Swing
Arm Operators
• Two buttons |
$29.00
|
 |
LiftMaster
370LM 315 MHz Mini Transmitter
• Compatible with receiver installed in Elite Swing
Arm Operators
• Three buttons |
$29.00
|
| |
LiftMaster
377LM 315 MHz Wireless Keypad
• Compatible with receiver installed in Elite Swing Arm Operators
|
$42.00
|
|
Linear
MT-1B One Channel Block Coded Transmitter
• Compatible with Linear RE-1 TES
• Block Coded
• 318 MHz MegaCode
• 9 Volt battery Included |
$21.95
|
Intercom
System |
 |
Aiphone
Chime Com Intercom System
• Use with DoorKing 1504 intercom/keypad and AAS DKLPi with
intercom interface.
• One door station; up to two interior stations
• Open voice door answering with door release
• Battery or DC power supply |
$125.00
|
Keypad |
 |
Linear
AM-KP Keypad
• Compatible with the Linear RE-1 Telephone Entry System
• 1-8 digit access codes
• Pedestal or wall mounted
• 12VDC
• Static & lightning protection
• 4"w x 5.5"h x 3"d |
$190.00
|
Telephone
Entry System |
|
Linear
RE-1 Telephone Entry System
• Full-featured telephone with intercom modes
• Built-in wireless318 MHz MegaCode radio & antenna
• Voice prompts
• Capacity for 100 entry codes
• Computer programmable
• 16 VAC transformer included |
$755.00
|
 |
Linear
Re-1 Black & White Camera
• Field upgradeable
• Receives power from RE-1
• Infrared illuminators
• 2 year limited warranty |
$228.00
|
Gooseneck |
|
Linear Standard Pad Mount Gooseneck
- 42" tall
LInear Standard Post Hole Mount
Gooseneck - 64" tall |
$150.00
|
Wire |
 |
Wire
by the Foot
• Belden 8444 - 4/22 - 4 Conductor 22 Gauge - $0.49
• Belden 8461 - 1 pair twisted 18 gauge - $0.34
• Cat 5 Wire - $0.26
• DoorKing InterConnect Cable - 2600-755 30-ft roll - $40.95
• 18 Gauge Jacketed Pair - $0.20
• 18 Gauge Loop Wire - Aircraft Grade - $0.42
• RG-6 Shielded Coax Cable - $0.20
• Siamese Cable - $0.41 |
|
| |
|
|
 |
|
|
|
|
|
