Slide
Gate Operators for Solar |
|
|
For
more product options click on the manufacturer's name |
|
Elite |
|
|
|
|
|
Elite
RoboSlide Gate Operator(Elite R-900)
• 20' wide x 800 lbs.
• 12 VDC Motor 115VAC
• Operates off low voltage transformer
or solar panel.
• Battery backup operation
• #41 Chain
• Dimensions: H:21-1/2"
- L:14" - W:12-1/2"
• Shipping Weight 105-lbs.
• 3-year warranty |
$1246.00
|
 |
Elite
Q203 RoboSwing/RoboSlide Auxiliary Module.
• Used to connect two units in
Master/Slave configuration
• Also used for adding magnetic
locks and shadow loops to installation.
Note: Purchase 2 units for Master/Slave |
$52.00
|
 |
Apollo
7000 Slide Gate Operator.
• 20' wide x 400 lbs
• 1/2HP 120VAC
• 25' of #40 Chain
• Battery Backup Operation
• Dimensions: H:21" - W:8" - L:21"
• Shipping weight: 105-lbs.
• 2-year warranty |
$1245.00
|
 |
Extra
Chain for Slide Gate Operators
• 10' lengths
• Includes 1 master link
• Size 40 or 41 |
#40
$38.00
#41 $49.00
|
 |
Yingli
Solar Panels -
• Tempered Solar Glass
• Anodized Aluminum Frame
• 12V Output. |
10
Watt - $150.00
20 Watt - $ 325.00
65 Watt - $495.00
|
 |
Morningstar
SunSaver Regulators
Morningstar Sunsaver 12V, 6 Amp - PR/MS-S6
Morningstar Sunsaver 12V, 10 Amp - PR/MS-S10
Morningstar Sunsaver 24V, 20 Amp - PR/MS-S20LVD |
6 Amp - $61.20
10 Amp - $79.20
20 Amp - $133.20
|
Safety
Loops and Loop Detectors
|
|
EMX
LP D-TEK D-Tek Vehicle Loop Detector (Viking Operators)
• 12 to 24jVAC/DC
• 9mA current draw
• Compatible with 11 pin mountable socket or wire harness.
• Tempurature range: -40F to 180F.
• 2 Year limited Warranty
Note: Order one for the safety loops and one
for the exit loop. Be sure to set the Loop Detectors to different
frequencies. |
$109.50
|
 |
EMX
HAR-11 Loop Detector Harness
• for use with EMX D-Tek Vehicle Loop Detector
• 11 pin socket with 3 feet of wire |
$9.95
|
 |
Driveway
Loop Cut-In Kit
• For loop installation in an existing asphalt or concrete
driveway.
• Requires a circular saw with a masonry blade and a calking
gun.
• Kit does not include twisted pair wire to connect to operator.
See below for wire.
Note: Order two for safety loops and one for
exit loop. |
4'x6' $75.00
4'x8' $85.00
4'x10' $100.00
|
 |
EMX
Lite Preformed Loop
• Applications: Saw cut, Poured concrete, Resurfaced asphalt.
• Lightweight preformed loop.
• Overall diameter of 0.26 inches.
• Comes standard with 50 feet of twisted and jacketed lead-in
wire.
• 2 Year limited Warranty
Note: Order two for safety loops and one for
exit loop. |
4x6 $96.75
4x8 $102.95
4x10 $107.00
|
 |
AGW
PerForm Preformed Loop Low Temperature
• Applications: Direct burial
in earth & gravel roads, Poured concrete.
• Overall diameter of 0.5 inches.
• Comes standard with 50 feet of twisted and jacketed lead-in
wire.
• 3 Year limited Warranty
Note: Order two for safety loops and one for
exit loop. |
4x6 $105.00
4x8 $115.00
4x10 $125.00
|
Exit
Probes
Can be used in place of the exit loop and loop detector |
|
EMX
CarSense 202 Driveway Sensor. Probe Style
Loop Detector Self Contained. 9- 35 Volt AC/DC
10 MA Standby current. Great for solar powered gates.
CS 202-50 With 50' length
lead wire
CS 202-100 With 100' length lead wire
EMX
CarSense 101 Driveway Sensor. Probe Style
Loop Detector Kit with separate detector module.
CS 101-24AC-50 24 VAC With 50' length lead wire
CS 101-24AC-100 24 VAC With 100' length lead wire
|
|
Remote
Controls |
 |
MultiCode
109950 One Channel Receiver 300 MHz & 310 MHz. (Viking Operators)
• 12-24 Volts AC or DC
• Auto voltage sensing
• Single relay model
• Supplied with whip antenna, three feet of coaxial cable,
and bulkhead connector. |
$45.00
|
 |
MultiCode
3089 1 Button 1 Channel Transmitter (Viking Operators)
• Compatible with MultiCode 19950 Receiver
• 300 MHz Frequency
• 10 Dip Switch
• Uses 9 Volt battery (supplied)
• One Year Warranty |
$12.95
|
 |
MultiCode
3070 1 button 1 Channel Micro Transmitter (Viking Operators)
• Compatible with MultiCode 19950 Receiver
• 300 MHz Frequency
• 10 Dip Switch
• 12 Volt battery Included
• Size: 2.5"x1.25"
• One Year Warranty |
$18.95
|
| |
MultiCode
1066 External Antenna Kit (Viking Operators)
• Has 15' cable.
• Great for increasing the range of your handheld gate opener
transmitters.
• Can be used with most brands of radio receivers |
$35.00
|
 |
LiftMaster
371LM 315 MHz Transmitter (Elite Operator)
• Compatible with receiver installed in Elite Swing
Arm Operators
• One button |
$22.00
|
 |
LiftMaster
372LM 315 MHz Transmitter (Elite Operator)
• Compatible with receiver installed in Elite Swing
Arm Operators
• Two buttons |
$29.00
|
 |
LiftMaster
370LM 315 MHz Mini Transmitter (Elite Operator)
• Compatible with receiver installed in Elite Swing
Arm Operators
• Three buttons |
$29.00
|
Keypad |
|
MultiCode
4200 Wireless Keypad (Viking Operators)
• Compatible with MultiCode 19950 Receiver
• 10 Dip Switch
• 300 MHz Frequency
• One Year Warranty
• 9 Volt battery Included
• Backlit Keypad
• Weatherproof |
$35.00
|
| |
LiftMaster
376LM 315 MHz Wireless Keypad (Elite Operator)
• Compatible with receiver installed in Elite Swing Arm Operators
|
$42.00
|
Intercom/Telephone
Entry System |
 |
LiftMaster
(formerly Oracle Pro) Wireless Telephone Entry System.
• 1000 Foot Line of Sight Range to Stations
• 120 Channels of Operation
• Built-in Digital Intercom
• Lights keypad on motion at night
• Plugs into cordless telephone |
|
Gooseneck |
|
Linear Standard Pad Mount Gooseneck
- 42" tall
LInear Standard Post Hole Mount
Gooseneck - 64" tall |
$150.00
|
Wire |
 |
Wire
by the Foot
• Belden 8444 - 4/22 - 4 Conductor 22 Gauge - $0.49
• Belden 8461 - 1 pair twisted 18 gauge - $0.34
• Cat 5 Wire - $0.26
• DoorKing InterConnect Cable - 2600-755 30-ft roll - $40.95
• 18 Gauge Jacketed Pair - $0.20
• 18 Gauge Loop Wire - Aircraft Grade - $0.42
• RG-6 Shielded Coax Cable - $0.20
• Siamese Cable - $0.41 |
|
| |
|
|
 |
|
|
|
|
|
