Eagle
Swing Arm Gate Operators |
|
For
more product options click on the manufacturer's name |
|
|
|
|
|
Eagle
100 Swing Gate Operator
• 16' wide x 400lbs.
• 1/2 HP 120 VAC.
• Can be used for Single or Double operation.
• Shipping Weight: 140-lbs. (Single)
• Remove top cap and arm for emergency open
• Pad Mount
• 5-year warranty |
$1145.00
|
 |
Eagle
200 1/2hp Swing Gate Operator
• 20' wide x 1000lbs gates.
• 1/2 HP 120V.
• Can be used for Single or Double operation.
• Pad Mount
• Shipping Weight: 140-lbs.
• Remove top cap and arm for emergency open
• 5-year warranty |
$1275.00
|
|
Eagle
200 1hp Swing Gate Operator
• 20' wide x 1000lbs
• Two 1/2 HP motors 120VAC
• Can be used for Single or Double Operation.
• Pad Mount
• Shipping Weight: 150-lbs
• 5-year warranty |
$1540.00
|
|
Eagle
Power Battery Backup System
• Provides 50 cycles in a 12 hour period
• Power-1: For 1/2hp single operators
• Power-2: For 1hp single operators or 1/2hp dual operators
•1-year warranty |
Power 1 $850.00
Power 2 $1175.00
|
Safety
Loops and Loop Detectors
|
|
EMX
MVP D-Tek Vehicle Loop Detector
• Loop Wire Diagnostics
• 9VDC to 240VAC
• Compatible with 11 pin mountable socket or wire harness
• Tempurature range: -40F to 180F
• 2-year limited warranty
Note: Order one for the safety loops and one
for the exit loop. Be sure to set the Loop Detectors to different
frequencies. |
$109.50
|
 |
EMX
HAR-11 Loop Detector Harness
• for use with EMX D-Tek Vehicle Loop Detector
• 11 pin socket with 3 feet of wire |
$9.95
|
 |
Driveway
Loop Cut-In Kit
•For loop installation in an existing asphalt or concrete
driveway.
•Requires a circular saw with a masonry blade and a calking
gun.
• Kit does not include twisted pair wire to connect to operator.
See below for wire.
Note: Order two for safety loops and one for
exit loop. |
4'x6' $75.00
4'x8' $85.00
4'x10' $100.00
|
 |
EMX
Lite Preformed Loop
• Applications: Saw cut, Poured concrete, Resurfaced asphalt.
• Lightweight preformed loop.
• Overall diameter of 0.26 inches.
• Comes standard with 50 feet of twisted and jacketed lead-in
wire.
• 2 Year limited Warranty
Note: Order two for safety loops and one for
exit loop. |
4x6 $96.75
4x8 $102.95
4x10 $107.00
|
 |
AGW
PerForm Preformed Loop Low Temperature
• Applications: Direct burial
in earth & gravel roads, Poured concrete.
• Overall diameter of 0.5 inches.
• Comes standard with 50 feet of twisted and jacketed lead-in
wire.
• 3 Year limited Warranty
Note: Order two for safety loops and one for
exit loop. |
4x6 $105.00
4x8 $115.00
4x10 $125.00
|
Exit
Probes
Can be used in place of the exit loop and loop detector |
|
EMX
CarSense 202 Driveway Sensor. Probe Style
Loop Detector Self Contained. 9- 35 Volt AC/DC
10 MA Standby current. Great for solar powered gates.
CS 202-50 With 50' length
lead wire
CS 202-100 With 100' length lead wire
EMX
CarSense 101 Driveway Sensor. Probe Style
Loop Detector Kit with separate detector module.
CS 101-24AC-50 24 VAC With 50' length lead wire
CS 101-24AC-100 24 VAC With 100' length lead wire
|
|
Remote
Controls |
 |
MultiCode
109950 One Channel Receiver 300 MHz & 310 MHz.
• 12-24 Volts AC or DC
• Auto voltage sensing
• Single relay model
• Supplied with whip antenna, three feet of coaxial cable,
and bulkhead connector. |
$45.00
|
 |
MultiCode
3089 1 Button 1 Channel Transmitter
• Compatible with MultiCode 19950 Receiver
• 300 MHz Frequency
• 10 Dip Switch
• Uses 9 Volt battery (supplied)
• One Year Warranty |
$12.95
|
 |
MultiCode
3070 1 button 1 Channel Micro Transmitter
• Compatible with MultiCode 19950 Receiver
• 300 MHz Frequency
• 10 Dip Switch
• 12 Volt battery Included
• Size: 2.5"x1.25"
• One Year Warranty |
$18.95
|
| |
MultiCode
1066 External Antenna Kit
• Has 15' cable.
• Great for increasing the range of your handheld gate opener
transmitters.
• Can be used with most brands of radio receivers
|
$35.00
|
|
MultiCode
4200 Wireless Keypad
• Compatible with MultiCode 19950 Receiver
• 10 Dip Switch
• 300 MHz Frequency
• One Year Warranty
• 9 Volt battery Included
• Backlit Keypad
• Weatherproof |
$35.00
|
Keypad |
 |
Linear
AMKP Keypad
• 1-to-8 digit access codes
• Pedestal or wall mounting
• For use indoors or outdoors
• Powered from control or 12VDC transformer
• Separate LEDs for "power/access granted" and "locked
out" indication
• Cast aluminum, environmentally protected housing
• 4"w x 5.5"h x 3"d
• Can be used as "Slave Keypad" for Linear RE-1 |
$190.00
|
Telephone
Entry System |
 |
Linear
RE-1 Telephone Entry System
• 318 MHz, MegaCode format
• Built-in radio receiver and antenna
• Supports 100 block-coded transmitters - 318 MHz
• Programmable by keypad, touchtone phone, or computer w/Modem
• Optional low light CCTV Camera Kit |
$755.00
|
 |
Linear
MT-1B 1-Channel Block Coded Transmitter
• MegaCode formatted, factory preprogrammed.
• Capacity for block coding
• 318MHz
• 9-volt Battery
• Visor clip included |
$21.95
|
 |
Linear
RE-BWC Black & White Camera for RE-1
• Field Upgradeable
• Receives power from RE-1
• Infrared illuminators allow visibility in complete darkness. |
$228.00
|
 |
Linear
Video Modulator for RE-1 Camera
• Converts video signal to UHF or CATV
• Viewable on standard Television set. |
$225.00
|
Gooseneck |
|
Linear Standard Pad Mount Gooseneck
- 42" tall
Linear Standard Post Hole Mount
Gooseneck - 61" tall |
$150.00
|
Wire |
 |
Wire
by the Foot
• Belden 8444 - 4/22 - 4 Conductor 22 Gauge - $0.49
• Belden 8461 - 1 pair twisted 18 gauge - $0.34
• Cat 5 Wire - $0.26
• DoorKing InterConnect Cable - 2600-755 30-ft roll - $40.95
• 18 Gauge Jacketed Pair - $0.20
• 18 Gauge Loop Wire - Aircraft Grade - $0.42
• RG-6 Shielded Coax Cable - $0.20
• Siamese Cable - $0.41 |
|
| |
|
|
 |
|
|
|
|
|
|
|
|
