Viking
Swing Arm Gate Operators |
|
|
For
more product options click on the manufacturer's name |
|
|
|
|
|
 |
New
Product - Viking T-21 Swing Gate Operator
• Max. Gate Capacity: 1200 lbs./20' to 2000 lbs./12'
• Operating Speed 13 - 16 Seconds per 90°. Duty Cycle:
100%
• Battery backup operation 100 full cycles (600 lbs/12')
• Battery 7 amp hr 12 VDC x 2. Operational voltage 24 VDC.
1 HP
• Main power source 120 / 220 VAC. Single Phase
• Warranty: 7-yrs Residential/5-yrs Commercial
|
$2250.00
|
|
Viking
F-1 Swing Gate Operator
• 12' wide x 1200 lbs. or 16' wide x 800lbs.
• 24 VDC Motor 120/220VAC
• Solar compatible - 40 watts at 24VDC
• Battery backup operation
• Non "scissor" action
• 7-year residential/5-year commercial warranty |
$1804.00
|
 |
Viking
R-6 Swing Gate Operator
• 14' wide x 600 lbs.
• 24 VDC Motor 120/220VAC
• Solar compatible - 40 watts at 24VDC
• Battery backup operation
• Non "scissor" action
• 5-year warranty |
1382.75
|
 |
Viking
X-9 Swing Gate Operator.
• 14' wide x 600 lbs
• 1/2HP 120VAC
• Solar compatible - 40 watts
at 24VDC
• Can open outwards from inside
• Battery
Backup Operation
• 3-year residential/2-year commercial
warranty |
$1409.00
|
| |
Master
Slave Wire
• Sold by the foot
|
$3.30
per foot
|
Safety
Loops and Loop Detectors
|
|
EMX
MVP D-Tek Loop Detector
• 9VDC to 240VAC
• Compatible with 11 pin mountable socket or wire harness
• 2-year limited warranty
Note: Order one
for the safety loops and one for the exit loop. Be sure to set the
Loop Detectors to different frequencies. |
$109.50
|
 |
EMX
HAR-11 Loop Detector Harness
• for use with EMX D-Tek Vehicle Loop Detector
• 11 pin socket with 3 feet of wire |
$9.95
|
 |
Driveway
Loop Cut-In Kit
• For loop installation in an existing asphalt or concrete
driveway.
• Requires a circular saw with a masonry blade and a calking
gun.
• Kit does not include twisted pair wire to connect to operator.
See below for wire.
Note: Order two for safety loops and one for
exit loop. |
4'x6' $75.00
4'x8' $85.00
4'x10' $100.00
|
 |
EMX
Lite Preformed Loop
• Applications: Saw cut, Poured concrete, Resurfaced asphalt.
• Lightweight preformed loop.
• Overall diameter of 0.26 inches.
• Comes standard with 50 feet of twisted and jacketed lead-in
wire.
• 2 Year limited Warranty
Note: Order two for safety loops and one for
exit loop. |
4x6 $96.75
4x8 $102.95
4x10 $107.00
|
 |
AGW
PerForm Preformed Loop Low Temperature
• Applications: Direct burial
in earth & gravel roads, Poured concrete.
• Overall diameter of 0.5 inches.
• Comes standard with 50 feet of twisted and jacketed lead-in
wire.
• 3 Year limited Warranty
Note: Order two for safety loops and one for
exit loop. |
4x6 $105.00
4x8 $115.00
4x10 $125.00
|
Exit
Probes
Can be used in place of the exit loop and loop detector |
|
EMX
CarSense 202 Driveway Sensor. Probe Style
Loop Detector Self Contained. 9- 35 Volt AC/DC
10 MA Standby current. Great for solar powered gates.
CS 202-50 With 50' length
lead wire
CS 202-100 With 100' length lead wire
EMX
CarSense 101 Driveway Sensor. Probe Style
Loop Detector Kit with separate detector module.
CS 101-24AC-50 24 VAC With 50' length lead wire
CS 101-24AC-100 24 VAC With 100' length lead wire
|
|
Remote
Controls |
 |
MultiCode
109950 One Channel Receiver 300 MHz & 310 MHz.
• 12-24 Volts AC or DC
• Auto voltage sensing
• Single relay model
• Supplied with whip antenna, three feet of coaxial cable,
and bulkhead connector. |
$45.00
|
 |
MultiCode
3089 1 Button 1 Channel Transmitter
• Compatible with MultiCode 19950 Receiver
• 300 MHz Frequency
• 10 Dip Switch
• Uses 9 Volt battery (supplied)
• One Year Warranty |
$12.95
|
 |
MultiCode
3070 1 button 1 Channel Micro Transmitter
• Compatible with MultiCode 19950 Receiver
• 300 MHz Frequency
• 10 Dip Switch
• 12 Volt battery Included
• Size: 2.5"x1.25"
• One Year Warranty |
$18.95
|
| |
MultiCode
1066 External Antenna Kit
• Has 15' cable.
• Great for increasing the range of your handheld gate opener
transmitters.
• Can be used with most brands of radio receivers |
$35.00
|
|
MultiCode
4200 Wireless Keypad
• Compatible with MultiCode 19950 Receiver
• 10 Dip Switch
• 300 MHz Frequency
• One Year Warranty
• 9 Volt battery Included
• Backlit Keypad
• Weatherproof |
$35.00
|
Keypad |
 |
Linear
AM-KP Keypad
• Compatible with the Linear RE-1 Telephone Entry System
• 1-8 digit access codes
• Pedestal or wall mounted
• 12VDC
• Static & lightning protection
• 4"w x 5.5"h x 3"d |
$190.00
|
Telephone
Entry System |
|
Linear
RE-1 Telephone Entry System
• Full-featured telephone with intercom modes
• Built-in wireless318 MHz MegaCode radio & antenna
• Voice prompts
• Capacity for 100 entry codes
• Computer programmable
• 16 VAC transformer included |
$755.00
|
 |
Linear
MT-1B 1-Channel Block Coded Transmitter
• MegaCode formatted, factory preprogrammed.
• Capacity for block coding
• 318MHz
• 9-volt Battery
• Visor clip included |
$21.95
|
 |
Linear
Re-1 Black & White Camera
• Field upgradeable
• Receives power from RE-1
• Infrared illuminators
• 2 year limited warranty |
$228.00
|
 |
Linear
Video Modulator for RE-1 Camera
• Converts video signal to UHF or CATV
• Viewable on standard Television set. |
$225.00
|
Gooseneck |
| |
Linear Standard Pad Mount Gooseneck
- 42" tall
LInear Standard Post Hole Mount
Gooseneck - 64" tall |
$150.00
|
Wire |
 |
Wire
by the Foot
• Belden 8444 - 4/22 - 4 Conductor 22 Gauge - $0.49
• Belden 8461 - 1 pair twisted 18 gauge - $0.34
• Cat 5 Wire - $0.26
• DoorKing InterConnect Cable - 2600-755 30-ft roll - $40.95
• 18 Gauge Jacketed Pair - $0.20
• 18 Gauge Loop Wire - Aircraft Grade - $0.42
• RG-6 Shielded Coax Cable - $0.20
• Siamese Cable - $0.41 |
|
| |
|
|
 |
|
|
|
|
|
