DoorKing Safety Devices

Loop Detectors, Loops and Accessories
Loop detectors & loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. These devices are not considered to be secondary entrapment prevention.
DoorKing Loop Detector DK 9405-010 Plug-in 2-Channel Loop Detector.

DK 9410-010 Plug-in Single Channel Loop Detector.
DKS 9405-010 $285.00
DKS 9410-010 $155.00
Qty:

DoorKing Loop Wire DoorKing Loop Wire by the Roll
• 18 AWG
• XLPE Insulation

DK 9402-076 500 Ft. Roll Black Loop Wire

DK 9402-077 1000 Ft. Roll Black Loop Wire

DK 9402-078 500 Ft. Roll Blue Loop Wire

DK 9402-079 1000 Ft. Roll Blue Loop Wire

DK 9402-080 500 Ft. Roll Red Loop Wire

DK 9402-081 1000 Ft. Roll Red Loop Wire
DKS 9402-076 $125.00
DKS 9402-077 $165.00
DKS 9402-078 $125.00
DKS 9402-079 $165.00
DKS 9402-080 $125.00
DKS 9402-081 $165.00
Qty:

DoorKing Pre-Formed Safety Loop DoorKing 9401-060 Prefabricated Loops
• 3 turns of loop wire enclosed in PLIOVIC tubing
• 24 ft. circumference
• 50 ft lead

DK 9401-060 Blue Prefabricated Loops

DK 9401-061 Yellow Prefabricated Loops

DK 9401-062 Red Prefabricated Loops
DKS 9401-060 $105.00
DKS 9401-061 $105.00
DKS 9401-062 $105.00
Qty:

Loop Accessories DoorKing Loop Accessories

DK 2600-771 Asphalt Sealant
• 10 oz. Tube
• Black

DK 2600-772 Concrete Sealant
• 10 oz. Tube
• Gray

DK 9401-045 Loop Test Meg-ohm Meter
DKS 2600-771 $11.00
DKS 2600-772 $11.00
DKS 9401-045 $415.00
Qty:

Secondary Entrapment Prevention - Non-Contact

Photo-beams are refered to as "non-contact" or type B1 devices, while reversing edges are refered to as "contact" or type B2 devices. Industry safety standards require that a secondary entrapment prevention device be installed with all gate operators.

Two types of photo-beams are available; thru beams and photo-reflective beams. Thru beams have a range in excess of 100 feet but require both a "sender" and "receiver." Photo-reflective beams have a limited range (35-feet), but use a reflector instead of a receiver and are easier to install.
DoorKing Infrared Photo-Cell DoorKing 8080-010 Infrared Thru-Beam Photo-Cell
• 24 VAC/VDC
• Includes sender & receiver, hooded metal enclosures & heater.
• For outdoor use with a sensing distance of up to 165 ft.
$318.25
Qty:
DoorKing Photo-Reflective Cells DoorKing Photo-Reflective Photo-Cells
• Includes 3-inch reflector
• Rated for outdoor use

DK 8080-011 Photo-Reflective Photo-Cell

• 12 VDC - 24 VAC
• Maximum 30-feet sensing distance
• Visible Red Beam
• Rated for outdoor use

DK 8080-030 Polarized Photo-Reflective Photo-Cell
• 24-240VAC/12-240VDC
• Includes 3-inch reflector
• Modulated infrared Beam
• Compact unit with 1/2-inch conduit fittings on the back & bottom
DKS 8080-011 $236.75
DKS 8080-030 $220.25
Qty:

DoorKing Photo Eye DoorKing 8080-031 Infrared Thru-Beam Photo-Cell
• 24-240VAC/12-240VDC
• Maximum 65-feet sensing distance
• Includes sender & receiver
• Modulated infrared Beam
• Rated for outdoor use
• Compact unit with 1/2-inch conduit fittings on the back & bottom
$293.50
Qty:

Secondary Entrapment Prevention - Contact

Contact sensors (edge device or the equivalent) type B2 are used as secondary entrapment prevention devices in slide, swing, overhead, vertical lift, vertical pivot and barrier gate operator applications.
DoorKing Safety Edges DoorKing Reversing Edges
• 5-foot or 6-foot Edge
• Includes PVC Mounting Channel

DK 8080-015 5-foot Reversing Edge
• Use with sliding, pivot and vertical lift gates

DK 8080-016 6-foot Reversing Edge
• Designed to be mounted on bottom of 1601 wood barrier arm.

DK 8080-020 5-foot Reversing Edge
• Sensitized on 3 sides
• Use with slide, swing, pivot & vertical lift gates

DK 8080-021 5-foot Reversing Edge
• Designed to fit 2-inch round gate post
• Use with slide, swing and pivot gates

DK 8080-022 5-foot Reversing Edge
• Designed to fit 2-inch square gate post
• Use with slide, swing and pivot gates
DKS 8080-015 $180.75
DKS 8080-016 $180.75
DKS 8080-020 $218.95
DKS 8080-021 $228.25
DKS 8080-022 $228.25
Qty:

  Contact Sensor Accessories

DK 8060-061 Wireless RF Transmitter & ReceiverKit
• Low battery alarm in Transmitter
• NEMA 4 enclosure with cable fitting for transmitter
• Transmitter powered by 9-volt lithium battery
• Receiver powered by 12 or 24-VAC/DC

DK 8080-017 Coil Cord
• Use with reversing edges
• Stretches approximately 16-feet.

DK 8060-076 Receiver Box
• Plastic enclosure for radio receiver
DKS 8060-061 $313.95
DKS 8080-017 $61.00
DKS 8060-076 $17.50
Qty: