DoorKing
Model 6050 Swing Gate Operator |
|
|
Standard
Features
• Residential applications
• 115 VAC, 60 60 Hz, 4.3 A
•1/2 –HP limited duty motor
•Dimensions: 13.25"w x 12"h
x 23"l
• For gates up to 10-feet wide, 400 Lb.
• Includes Primary and Built-in Secondary entrapment prevention
system
• Self-adjusting, maintenance free limits
• Programming switches allow you to set desired mode of operation
• Keyed release for manual operation
• Fail-safe design
• Auto-close timer
• Plug-in loop detectors
• Overlap feature for master-slave gate operation
• Gate Tracker reporting output provides operator data to access
control system* (*DKS systems with card access only)
• 5-year warranty
Options
• Available for single or dual gates
• Master / Slave connection cable (slave operator includes
30-feet of cable)
• Post or Pad mounting options
• Gate operator control stations
• Heater kit (recommended when temperature routinely falls
below 32°F (0°C).
• Plug-in loop detectors |
|
|
Pad
|
|
| Swing
Gate Operator |
 |
DoorKing
6050-080 Primary Swing Gate Operator
• Use for single swing gate or master unit for dual swing
gates |
$1199.00
|
DoorKing
6050-081 Seconday Swing Gate Operator
• Slave unit for dual swing gates
• Cannot be used as a stand-alone operator
• Includes 30-feet of Master/Slave Interconnect Cable |
$850.00
|
Mounting
Hardware Kit
Hardware Kits must
be ordered with the operators. Hardware kits include
drive arm and extension arm, arm mounting brackets, arm joint and
mounting configuration hardware. Without the hardware kit, you will
not have a complete operator. Order two for the double gate operator |
 |
DoorKing
2600-693 Post Mount Hardware Kit
• Includes two 2-1/2 inch (o.d.) x 3 foot mounting posts &
necessary hardware
• Dimension: Variable by Installation |
$190.00
|
 |
DoorKing
2600-691 Pad Mount Hardware Kit
• Includes mounting base & necessary hardware
• Dimension: 10" |
$190.00
|
Doorking
Master-Slave Interconnect Wire
To be used to connect the Master Unit
with the Slave Unit.
Not suitable for direct burial-requires conduit. |
 |
DoorKing
2600-754 500 Ft. Roll |
$550.00
|
| DoorKing
2600-755 30 Ft. Roll |
$50.00
|
| DoorKing
2600-756 40 Ft. Roll |
$60.00
|
DoorKing
2600-757 50 Ft. Roll |
$70.00
|
Replacement
Parts and Accessories |
|
7.5
Amp Fuse and Fuse Holder
• For 1/2 hp single gate operators. |
$5.95
|
10
Amp Fuse and Fuse Holder
• For double gate operators, install in the master unit. |
$5.95
|
| |
DoorKing
1601-154 Heater Kit
• For 6000 series operators installed in cold weather environments
• Built-in fan and thermostat |
$275.00
|
| |
DoorKing
2600-770 Moly D Grease
• 14 oz. Tube Molybdenum Disulfide (Moly D) Multi-purpose
grease
• Use on swing gate worm gears. |
$10.00
|
| |
DoorKing
2600-225 Gate Test Scale
• Measure the amount of force (ft/lb) required to start/stop
a gate. |
$50.00
|
| |
DoorKing
3004-010 Magnetic Counter Probe |
$145.00
|
| |
DoorKing
1404-080 External Alarm Reset Control
• Installed in the Line-Of-Site of the gate operator
• Remote reset button & indicator light signals when a
gate operator is in a hard shutdown condition
• Allows for an easy reset of the gate system. |
$175.00
|
| |
DoorKing
2600-664 Concrete Base Plate
• For mounting post mounted operators with wide spread mounting
post onto an existing concrete pad. |
$120.00
|
| |
DoorKing
2600-635 Mounting Plate
• Replacement mounting plate for post mounted operators with
short spread mounting posts. |
$80.00
|
| |
DoorKing
2600-260 Mounting Pipe
• Replacement mounting pipe.
• 2-1/2 inch (o.d.) pipe is 3 feet long & threaded on
one end.
• Two required per operator. |
$55.00
|
| |
DoorKing
4001-110 Control Box
• Replacement rain resistant enclosure is designed to accept
4502 control board & plug-in loop detectors.
• Does not include control board or loop detectors. |
$195.00
|
| |
DoorKing
4502-010 Replacement 6050 Circuit Board |
$475.00
|
| |
DoorKing
6100-040 Cross-shaft Cast Housing Assembly
• Includes cast housing, cross-shaft, worm drive gear and
related hardware,
• Does not include output shaft, clutch plates or clutch disc.
|
$225.00
|
| |
DoorKing
2599-008 Label |
$2.25
|
| |
DoorKing
2599-199 Label Universal
• Formerly DK2600-841 |
$2.00
|
| |
DoorKing
2600-061 2" Collar |
$10.25
|
| |
DoorKing
2600-089 Replacement Drive Belt |
$16.75
|
| |
DoorKing
2600-102 Motor Capacitor
• Replacement motor capacitor |
$70.00
|
| |
DoorKing
2600-607 Padlock with Key for Arm Joint |
$49.00
|
| |
DoorKing
2600-614 Worm Gear 80 Tooth
• Replacement delrin
main drive gear. |
$125.00
|
| |
DoorKing
2600-634 Connecting Rod |
$28.00
|
| |
DoorKing
2600-650 Flange Plate |
$42.00
|
| |
DoorKing
2600-651 Connector Arm Clamp, Plated |
$31.50
|
| |
DoorKing
2600-659 Crank Arm |
$32.00
|
| |
DoorKing
2600-670 Crank Arm |
$23.25
|
| |
DoorKing
2600-672 Arm Release & Joint Assembly |
$87.50
|
| |
DoorKing
2600-675 Replacement Main Shaft |
$85.00
|
| |
DoorKing
2600-711 Bracket |
$25.00
|
| |
DoorKing
2801-002 Clutch Disk
• Replacement clutch disk |
$13.00
|
Links |
| |
Secondary
Entrapment Devices (Safety Systems) |
|
| |
DoorKing
Access Control |
|
| |
Return
to DoorKing Gate Operators |
|
 |
|
|
|
