DoorKing
Model 6300 1HP Swing Gate Operator |
|
Standard
Features
• 1–HP continuous duty motor, for gates up to 22-feet
wide, 800 Lb.
• Residential, commercial and industrial applications
• Includes Primary and Built-in Secondary entrapment prevention
system
• Self-adjusting, maintenance free limits
• Two convenience outlets
• Programming switches allow you to set desired mode of operation
• Keyed release for manual operation
• Fail-safe design
• Auto-close timer
• Plug-in loop detectors
• Overlap feature for master-slave gate operation
• Gate Tracker reporting output provides operator data to access
control system*
(*DKS systems with card access only)
• 5-year warranty
Options
• Gate operator control stations.
• Heater kit (recommended when temperature routinely falls
below 32°F (0°C).
• Plug-in loop detectors |
|
|
Pad
Mount
|
|
Swing
Gate Operators
|
 |
DoorKing
6300-084 Single Gate Operator
• 115 VAC, 60Hz, 7.0A
• Use for single swing gate or master unit for dual swing
gates
• Dimensions: 16.25"w x 13.5"h x 31"l |
$
|
DoorKing
6300-090 Single Gate Operator
• 230 VAC, 60Hz, 3.5A
• Use for single swing gate or master unit for dual
swing gates
• Dimensions: 16.25"w x 13.5"h x 31"l |
$
|
DoorKing
6300-094 Single Gate Operator
• 460VAC, 60Hz, 1.8A
• Use for single swing
gate or master unit for dual swing gates
• Dimensions: 16.25"w
x 13.5"h x 31"l |
$
|
DoorKing
6300-085 Secondary Gate Operator
• Slave unit
for dual swing gates without DC package
• Cannot be used
as a stand-alone operator
• Includes 50-feet of Master/Slave
Interconnect Cable
• Dimensions: 16.25"w x 13.5"h
x 31"l |
$
|
Operator
w/DC Convenience Open Option |
|
DoorKing
6300-086 Single Gate Operator w/DC Convenience Open Option
(Battery Backup)
• 115 VAC, 60Hz, 7.0A
• Use for single swing gate or master unit for dual swing
gates
• Dimensions: 16.25"w x 13.5"h x 31"l |
$
|
DoorKing
6300-091 Single Gate Operator w/DC Convenience Open Option
(Battery Backup)
• 230 VAC, 60Hz, 3.5A
• Use for single swing gate or master unit for dual swing
gates
• Dimensions: 16.25"w x 13.5"h x 31"l |
$
|
DoorKing
6300-095 Single Gate Operator w/DC Convenience Open Option
(Battery Backup)
• 460 VAC, 60Hz, 1.8A
• Use for single swing gate or master unit for dual swing
gates
• Dimensions: 16.25"w x 13.5"h x 31"l |
$
|
DoorKing
6300-087 Secondary Gate Operator w/DC Convenience Open Option
• Slave unit for dual swing gates with DC package
• Cannot be used as a stand-alone operator
• Includes 50-feet of Master/Slave Interconnect Cable
• Dimensions: 14.25"w x 13.5"h x 31"l |
$
|
Mounting
Hardware Kit
Hardware Kits must
be ordered with the operators. Hardware kits include
drive arm and extension arm, arm mounting brackets, arm joint and
mounting configuration hardware. Without the hardware kit, you will
not have a complete operator. Order two for the double gate operator |
 |
DoorKing
2600-243 Post Mount Hardware Kit
• Includes two 2-1/2 inch (o.d.) x 3 foot mounting posts &
necessary hardware
• Dimension: Variable by Installation |
$
|
 |
DoorKing
2600-244 Pad Mount Hardware Kit
• Includes mounting base & necessary hardware
• Dimension: 10" |
$
|
Doorking
Master-Slave Interconnect Wire
To be used to connect the Master Unit
with the Slave Unit.
Not suitable for direct burial-requires conduit. |
 |
DoorKing
2600-754 500 Ft. Roll |
$
|
| DoorKing
2600-755 30 Ft. Roll |
$
|
| DoorKing
2600-756 40 Ft. Roll |
$
|
DoorKing
2600-757 50 Ft. Roll |
$
|
Replacement
Parts and Accessories |
|
7.5
Amp Fuse and Fuse Holder
• For 1/2 hp single gate operators. |
$
|
10
Amp Fuse and Fuse Holder
• For double gate operators, install in the master unit. |
$
|
| |
DoorKing
1601-154 Heater Kit
• For 6000 series operators installed in cold weather environments
• Built-in fan and thermostat |
$
|
| |
DoorKing
2600-770 Moly D Grease
• 14 oz. Tube Molybdenum Disulfide (Moly D) Multi-purpose
grease
• Use on swing gate worm gears. |
$
|
| |
DoorKing
2600-225 Gate Test Scale
• Measure the amount of force (ft/lb) required to start/stop
a gate. |
$
|
| |
DoorKing
3004-010 Magnetic Counter Probe |
$
|
| |
DoorKing
1404-080 External Alarm Reset Control
• Installed in the Line-Of-Site of the gate operator
• Remote reset button & indicator light signals when a
gate operator is in a hard shutdown condition
• Allows for an easy reset of the gate system. |
$
|
| |
DoorKing
4001-110 Control Box
• Replacement rain resistant enclosure is designed to accept
4502 control board & plug-in loop detectors.
• Does not include control board or loop detectors. |
$
|
| |
DoorKing
4502-010 Replacement 6100 Circuit Board |
$
|
| |
DoorKing
2600-644 Worm Gear 100 Tooth
• Replacement delrin
main drive gear. |
$
|
| |
DoorKing
2600-174 Replacement Main Shaft |
$
|
| |
DoorKing
2600-102 Motor Capacitor
• Replacement motor capacitor |
$
|
| |
DoorKing
6300-042 Cross-shaft Cast Housing Assembly
• Includes cast houseing, cross-shaft, worm drive gear &
related hardware
• Does not include output shaft, clutch plates or clutch disc. |
$
|
Links |
| |
Secondary
Entrapment Devices (Safety Systems) |
|
| |
DoorKing
Access Control |
|
| |
Return
to DoorKing Gate Operators |
|
 |
|
|
|
