DoorKing Model 9050 Slide Gate Operator |
| The Model 9050 operator is designed to operate vehicular slide gates in residential and light-duty commercial applications only. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements. |
|
|
Standard
Features
• 1/2 –HP limited duty motor
• 115VAC, 60Hz, 4.3A
• For gates up to 16-feet, 300 Lb.
• Dimensions: 12"w x 24"h x 11.5"d
• Residential applications only
• Includes 20-feet of #41 chain
• 5-year warranty
Options
• Heater kit (recommended when temperature routinely falls
below 32°F (0°C).
• Plug-in loop detectors
• Secondary entrapment prevention devices are required with
this gate operator.
• Fail-secure keyed release
|
|
|
DoorKing
9050-080 Slide Gate Operator
• Fail-safe design
• Auto-close timer
• Plug-in loop detectors
• 2 convenience outlets
• Self-adjusting, maintenance free limits
• Programming switches allow you to set desired mode of operation |
$926.50
|
Options |
| |
DoorKing
2600-862 Fail-Secure Lock Kit
• Changes operator from Fail-Safe to Fail-Secure
• Includes keyed release to open gate upon power outage. |
$22.75
|
| |
DoorKing
2600-443 Nickel Plated #41 Chain
• 10-feet of #41
roller chain & two master links |
$59.00
|
| |
DoorKing
2600-444 Nickel Plated #40 Chain
• 10-feet of #40
roller chain & two master links |
$77.95
|
| |
DoorKing
2600-475 Stainless Steel #41 Chain
• 20-feet of
#41 roller chain & two master links |
$290.25
|
| |
DoorKing
2600-441 #41 Chain
• 20-feet of #41 roller chain
& two master links |
$76.00
|
| |
DoorKing
2600-442 #40 Chain
• 20-feet of #40 roller chain
& two master links |
$106.00
|
| |
DoorKing
2600-418 Base Plate
• Use to post mount the 9050
operator
• Posts not included |
$57.25
|
| |
DoorKing 2600-970 Stop Bracket
• Use with DKS 2600-418 Base Plate
• Creates a physical stop for the operator when post mounted |
$44.00
|
DoorKing 9050 Slide Gate Operator Package |
 |
MultiCode 109950 Receiver
MultiCode 308911 Transmitter
MultiCode 106603 Antenna
AAS Advantage DKW Wireless Digital Keypad
EMX IRB-4X Infrared Photo Eye
EMX Safety Loops
Ditek Surge Protector
|
DoorKing
9050 Slide Gate Operator Package Includes:
• Single Operator
• 2 4x8 EMX safety loops with DKS 9410 loop detector
• 1 4x8 EMX exit loop with DKS 9410 loop detector
• MultiCode 109950 Receiver and 2 - MultiCode 308911 Visor Style Remote Transmitters
• MultiCode 106603 External Antenna
• AAS Advantage DKW Wireless Keypad
• Ditek Surge Protector |
$1,906.00
|
Accessories & Replacement Parts |
| |
DoorKing
2600-961 Chain Link Gate Bracket
• Includes 5/16" galvanized steel L bracket, stainless
steel U-bolts & hardware
• Two required per gate |
$57.25
|
|
7.5
Amp Fuse and Fuse Holder
• For 1/2 hp single gate operators. |
$5.95
|
10
Amp Fuse and Fuse Holder
• For double gate operators, install in the master unit. |
$5.95
|
| |
DoorKing
1601-154 Heater Kit
• For 9000 series operators installed in cold weather environments
• Built-in fan and thermostat |
$285.00
|
| |
DoorKing
3004-010 Magnetic Counter Probe |
$150.00
|
| |
DoorKing
1404-080 External Alarm Reset Control
• Installed in the Line-Of-Site of the gate operator
• Remote reset button & indicator light signals when a
gate operator is in a hard shutdown condition
• Allows for an easy reset of the gate system. |
$181.00
|
| |
DoorKing
4702-010 Circuit Board
• For model 9050 |
$341.50
|
| |
DoorKing
4701-010 Circuit Board
• For model 905 |
$341.50
|
| |
DoorKing
2600-271 #40 & #41 Chain Stop
• Replacement
chain stop |
$19.75
|
| |
DoorKing
2600-903 Drive Shaft Assembly
• Includes drive
shaft, sprocket and front bearing. |
$62.00
|
| |
DoorKing
2600-860 Solenoid Lock Assembly
• Has all parts
needed to replace the solenoid lock in the field. |
$66.75
|
Links |
| |
Secondary
Entrapment Devices (Safety Systems) |
 |
| |
DoorKing
Access Control |
|
| |
Return
to DoorKing Gate Operators |
|
 |
|
|
|
