Home

 
Installation Diagrams
Learning Center
Community Forum
Monthly Newsletter!
 
Swing Arm Operators
Linear Arm Operators
Slide Gate Operators
Underground Operators
Barrier Gate Operators
Overhead Operators
 
Keypads
Telephone Entry
Card Readers
Radio Remotes
Intercoms
 
Loops & Loop Detectors
Photo Eyes & Safety
Magnetic Locks & Strikes
Timers & Pushbuttons
Solar Panels & Power
Wire & Cable
Closed Circuit TV
Special Deals & Surplus
 
Steel Driveway Gates
Garden Gates
Custom Gates
Aluminum Gates
Gate Hardware
 
Equipment Manuals
Buyers Guide For Gates
Safety & U. L. 325
Equipment Review
Return & Warranty Policy
Contact Us
Resource Partners
Manufacturer's Links
AAS AeGIS
Aiphone Allstar
Apollo Cyrex
DC Solutions Doorking
Eagle Elite
Elk EMX
FAAC HID
Hy-Security Liftmaster
Linear Miller Edge
Moor-O-Matic Multicode
Osco Porta-King
Ramset Reno A&E
Rofu Rutland
SEA Securitron
Sentex Stanley
Transmitter Solutions Viking Access

FAAC 412 Electromechanical Swing Gate Operator

• Designed for light residential, single family use
• Two year limited warranty
• Mechanical locking in the opened and closed positions
• Easy interconnection of loop detectors, photocells, etc. to reverse a gate if an obstacle is sensed
• Easy interconnection of actuating devices like remote control radios, key pads and telephone entry systems
• On-board diagnostic LEDs
• Convenient manual release in case of power failure
• Not recommended for use with solid gates or in high wind situations

Note: Right and Left arms are determined by standing inside the property facing out.

24V
450
455D
 
Specifications
 
Parameter
High Voltage
Application
Single family residence, single leaf or bi-parting gate (vehicles only, not for pedestrian use)
Cycles per hour
18
Maximum gate swing
110 degrees
90 degree opening time
13 seconds
Maximum weight per gate leaf
500 pounds, (226.8 kg)
Maximum length per gate leaf
14 feet (4.2 m)
Approx. operating temperature range
-4°F to 131°F (-20°C to 55°C)
Mechanical Locking
Available in opened and closed positions
Voltage
115VAC
Note: Operator specifications are approximate. Environmental factors can change the performance of the operator.

Operator Kits

FAAC 1412BP1-R 412 Kit for Bi-parting Gates
• Kit includes: 1 DX (right side) operator & cover; 1 SX (left side) operator & cover; 455D Control panel w/ Mounting hardware; 10 x 12 in. enclosure
$1430.00
Qty:
FAAC 412DX1-R 412 DX Kit for Single Leaf Right Hinged Gate
• Kit includes: 1 DX (right) operator & cover; 455D Control panel w/ Mounting hardware; 10 x 12 in. enclosure.
$980.00
Qty:
FAAC 412SX1-R 412 SX Kit for Single Leaf Left Hinged Gate
• Kit includes: 1 SX (left) operator & cover; 455D Control panel w/ Mounting hardware; 10 x 12 in. enclosure.
$980.00
Qty:

Operator & Cover Only

No Control Panel or Box
FAAC 104475 412 DX Operator
• For Right Hinged Gate Leaf
$495.00
Qty:
FAAC 104476 412 SX Operator
• For Left Hinged Gate Leaf
$495.00
Qty:

Positive Stops

Note: Positive Gate Stops, which limit gate travel, are required in the opened and closed positions. For IN swinging gates (as seen from inside property) with masonry columns, installer must notch the columns in order for operator to swing freely.
FAAC 3562 Right Positive Stop
• Model 80-412DX
• 4-rod internal stop
$100.00
Qty:
FAAC 3563 Left Positive Stop
• Model 80-412SX
• 4-rod internal stop
$100.00
Qty:
Pantograph
• Used when a column cannot be notched
• Inward swing only
Pantographs are no longer available from FAAC & will need to be manufactured by the installer.
 

Options & Accessories

FAAC 785163 Photobeam Set
• Directional with diagonal alignment
• ±4 degrees of detection
• 100 ft range
• Required power supply: 24-35 VDC (from FAAC control panel)
• Dimensions: 2-3/4 in. x 3-3/4 in. x 1-3/4 in.
$183.75
Qty:

FAAC 401028/737630 Standard Photobeam Mounting Post
• Foundation plate included
• Anodized Aluminum
• 22" h x 4.5"d x 3.54" w
• Photobeam sets require 2 posts
$94.50
Qty:
FAAC 401035/737630 Double Photobeam Mounting Post
• Foundation plate included
• Anodized Aluminum
• 44" h x 4.5"d x 3.54" w
• Photobeam sets require 2 posts
$153.00
Qty:
FAAC 785152 Photocell Set
• Requires metal or plastic housing - see below
• Transmitter to receiver sensing provides reliable all-weather sensing
• 90 ft range
• Required power supply: 19 - 34 VDC (from FAAC control panel)
• Dimensions: 2.75"w x 2.75"h x 4"d
$231.50
Qty:
  FAAC 720089 Photocell Metal Housing
• Powder coated steel
• Dimensions: 2.5"h x 2/5"w x 2/75"d
$37.00
Qty:
  FAAC 720086 Photocell Plastic Housing
• Dimensions: 2.5"h x 2/5"w x 2/75"d
$8.00
Qty:
FAAC RP1418DS Receiver
• Single Channel
• 418 mHz
$68.00
Qty:
FAAC TM1418DS Transmitter
• Single Button
$38.00
Qty:
FAAC TM2418DS Transmitter
• Two Button
$45.00
Qty:
  FAAC 2664 Loop Detector
• DSP 15
• Plug in style
$150.00
Qty:
 
FAAC 2665.1 Shadow Detector Kit
• Includes one detector base and relay for shadow loop
• 115v
$181.50
Qty:
  FAAC 2665.2 Shadow Detector Kit
• Includes one detector base & relay for shadow loop
• 230v
$181.50
Qty:
FAAC 3520 Battery Back-up
• BC Pro Single System Back-up
• 115v
$1384.25
Qty:
FAAC 3522 Battery Back-up
• BC Pro Dual System Back-up
• 115v
$1573.25
Qty:
FAAC 3521 Battery Back-up
• 700i Single System Back-up
• 230V
$1384.25
Qty:
FAAC 3523 Battery Back-up
• 700i Dual System Back-up
• 230V
$1573.25
Qty:

Replacement Parts

FAAC 790919 455D Control Panel
• 115V
$783.75
Qty:
FAAC 790926 455D Control Panel
• 230V
$567.00
Qty: