FAAC
412 Electromechanical Swing Gate Operator |
|
|
•
Designed for light residential, single family use
• Two year limited warranty
• Mechanical locking in the opened and closed positions
• Easy interconnection of loop detectors, photocells, etc.
to reverse a gate if an obstacle is sensed
• Easy interconnection of actuating devices like remote control
radios, key pads and telephone entry systems
• On-board diagnostic LEDs
• Convenient manual release in case of power failure
• Not recommended for use with solid gates or in high wind
situations |
|
Specifications |
|
Parameter |
High
Voltage |
Application |
Single
family residence, single leaf or bi-parting gate (vehicles only,
not for pedestrian use) |
|
Cycles
per hour |
18 |
Maximum
gate swing |
110
degrees |
90
degree opening time |
13
seconds |
|
Maximum
weight per gate leaf |
500
pounds, (226.8 kg) |
Maximum
length per gate leaf |
14
feet (4.2 m) |
Approx.
operating temperature range |
-4°F
to 131°F (-20°C to 55°C) |
|
Mechanical
Locking |
Available
in opened and closed positions |
Voltage |
115VAC
|
Note: Operator specifications
are approximate. Environmental factors can change the performance
of the operator. |
|
|
|
Operator Kits |
Note: Right
and Left arms are determined by standing inside the property facing
out.
|
FAAC
1412BP1-R 412 Kit for Bi-parting Gates
• Kit includes: 1 DX (right side) operator & cover; 1
SX (left side) operator & cover; 455D Control panel w/ Mounting
hardware; 10 x 12 in. enclosure |
$1450.00
|
FAAC
412DX1-R 412 DX Kit for Single Leaf Right Hinged Gate
• Kit includes: 1 DX (right) operator & cover;
455D Control panel w/ Mounting hardware; 10 x 12 in. enclosure. |
$990.00
|
FAAC
412SX1-R 412 SX Kit for Single Leaf Left Hinged Gate
• Kit includes: 1 SX (left) operator & cover; 455D Control
panel w/ Mounting hardware; 10 x 12 in. enclosure. |
$990.00
|
Operator & Cover Only
No Control Panel or Box
|
FAAC
104475 412 DX Operator
• For Right Hinged Gate Leaf |
$495.00
|
FAAC
104476 412 SX Operator
• For Left Hinged Gate Leaf |
$495.00
|
Positive Stops |
|
FAAC
3562 Right Positive Stop
• Model 80-412DX
• 4-rod internal stop |
Internal Positive Stops are no longer available. If replacements are required, an external positive stop may be used. |
FAAC
3563 Left Positive Stop
• Model 80-412SX
• 4-rod internal stop |
|
Pantograph
• Used when a column cannot be notched
• Inward swing only
|
Pantographs
are no longer available from FAAC & will need to be manufactured
by the installer. |
 |
Universal
Positive Gate Stop.
• Use these to align stop position with gate operators that
require positive stops.
• Most external gate stops are unsightly & are not adjustable.
• These stops allow critical alignment of single & bi-parting
gates & are unobtrusively located by the bottom hinge
• Made exclusively by us. |
$45.00
|
 |
Elite
APSA Positive Gate Stop.
• Aluminum positive stop
with two rubber grommets. |
$55.00
|
Options & Accessories |
|
FAAC
785163 Photobeam Set
• Directional with diagonal alignment
• ±4 degrees of detection
• 100 ft range
• Required power supply: 24-35 VDC (from FAAC control panel)
• Dimensions: 2-3/4 in. x 3-3/4 in. x 1-3/4 in. |
$183.75
|
|
FAAC
401028/737630 Standard Photobeam Mounting Post
• Foundation plate included
• Anodized Aluminum
• 22" h x 4.5"d x 3.54" w
• Photobeam sets require 2 posts |
$104.75
|
FAAC
401035/737630 Double Photobeam Mounting Post
• Foundation plate included
• Anodized Aluminum
• 44" h x 4.5"d x 3.54" w
• Photobeam sets require 2 posts |
$160.75
|
FAAC
785152 Photocell Set
• Requires metal or plastic housing - see below
• Transmitter to receiver sensing provides
reliable all-weather sensing
• 90 ft range
• Required power supply: 19 - 34 VDC (from FAAC control panel)
• Dimensions: 2.75"w x 2.75"h x 4"d |
$243.25
|
| |
FAAC
720089 Photocell Metal Housing
• Powder coated steel
• Dimensions: 2.5"h x 2/5"w x 2/75"d |
$37.00
|
| |
FAAC
720086 Photocell Plastic Housing
• Dimensions: 2.5"h x 2/5"w x 2/75"d |
$8.00
|
|
FAAC
RP1418DS Receiver
• Single Channel
• 418 mHz |
$68.00
|
|
FAAC
TM1418DS Transmitter
• Single Button |
$38.00
|
|
FAAC
TM2418DS Transmitter
• Two Button |
$45.00
|
| |
FAAC
2664 Loop Detector
• DSP 15
• Hard wired style |
$162.00
|
| |
FAAC
2665 Loop Detector
• DSP 11
• Plugs into control panel backplate |
$108.00
|
| |
FAAC
2667 Loop Detector
• DSP 10
• Plugs into control panel backplate
• Has sensitivity adjustment |
$117.00
|
| |
FAAC
2665.1 Shadow Detector Kit
• Includes one DSP11 detector base and relay for shadow loop
• 115v |
$150.00
|
| |
FAAC
2667.1 Shadow Detector Kit
• Includes one DSP10 detector base and relay for shadow loop
• 115v |
$155.00
|
|
FAAC
3520 Battery Back-up
• BC Pro Single System Back-up
• 115v |
$1265.00
|
FAAC
3522 Battery Back-up
• BC Pro Dual System Back-up
• 115v |
$1435.00
|
Replacement Parts |
|
FAAC
790919 455D Control Panel
• 115V |
$510.00
|
FAAC
790926 455D Control Panel
• 230V |
$855.00
|
