FAAC
415 Electromechanical Swing Gate Operator |
| |
•
Designed for residential use
• Two year limited warranty
• Sleek design
• Sealed limit switches
• Designed to provide power and versatility to an economical
residential swing operator
• Includes two 12V batteries. Operates even in case of power
failure.
• Reverse on contact
• Slow down "soft stop" |
|
|
Note:
For IN swinging gates (as seen from inside property)
with masonry columns, installer must notch the columns
in order for operator to swing freely. |
|
|
|
|
Specifications |
|
Duty
Cycle |
100% |
Maximum
Gate Swing |
110
Degrees |
90
Degree Opening time |
13
Seconds |
Maximum
Weight per gate leaf |
500
lbs. (227 kg) |
Maximum
length per gate leaf |
15
feet (4.6 m) |
Approx.
operating temperature range |
-4°F
to 131°F (-20°C to 55°C) |
Voltage |
Primary:
115vac
Secondary: 24vac (100va transformer) |
Absorbed
Power |
3
A |
Effective
Stroke |
16.5
in. (41.9 cm) |
Protection
Class |
Nema
4x |
Note:
Operator specifications are approximate. Environmental factors can
change the performance of the operator. |
|
|
|
 |
FAAC
10441811.5 415 Basic Single Kit
• Includes Operator, Control Panel, 14 x 16 enclosure, &
transformer. |
$
|
FAAC
10441811.5 - 10441811 415 Basic Dual Kit
• Includes Two Operators, Control Panel, 14 x 16 enclosure,
and transformer. |
$
|
FAAC
10441811 415 Operator Only
• Slave arm or replacement arm |
$
|
Standard
Voltage
115vac |
FAAC
1044182.5 415 Basic Single Kit
• Includes Operator, 455D Control Panel, 10 x 12 enclosure |
$
|
FAAC
1044182.5L 415 Wired Single Kit
• Includes Operator, 455D Control Panel, 14 x 16 pre-wired
enclosure |
$
|
FAAC
1044182.5 - 1044182 - 2194 415 Basic Dual Kit
• Includes Two Operators, 455D Control Panel, 10 x 12 enclosure |
$
|
FAAC
1044182.5L - 1044182 - 2194 415 Prewired Dual Kit
• Includes Two Operators,455D Control Panel, 14 x 16 prewired
enclosure |
$
|
FAAC
1044182 415 Operator Only
• Slave arm or replacement arm |
$
|
Options
& Accessories |
|
FAAC
785163 Photobeam Set
• Directional with diagonal alignment
• ±4 degrees of detection
• 100 ft range
• Required power supply: 24-35 VDC (from FAAC control panel)
• Dimensions: 2-3/4 in. x 3-3/4 in. x 1-3/4 in. |
$
|
|
FAAC
401028/737630 Standard Photobeam Mounting Post
•
Foundation plate included
• Anodized Aluminum
•
22" h x 4.5"d x 3.54" w
• Photobeam sets
require 2 posts |
$
|
FAAC
401035/737630 Double Photobeam Mounting Post
•
Foundation plate included
• Anodized Aluminum
•
44" h x 4.5"d x 3.54" w
• Photobeam sets
require 2 posts |
$
|
FAAC
785152 Photocell Set
• Requires metal or plastic housing - see below
• Transmitter to receiver sensing provides
reliable all-weather sensing
• 90 ft range
• Required power supply: 19 - 34 VDC (from FAAC control panel)
• Dimensions: 2.75"w x 2.75"h x 4"d |
$
|
| |
FAAC
720089 Photocell Metal Housing
• Powder coated
steel
• Dimensions: 2.5"h x 2/5"w x 2/75"d |
$
|
| |
FAAC
720086 Photocell Plastic Housing
• Dimensions:
2.5"h x 2/5"w x 2/75"d |
$
|
|
FAAC
RP1418DS Receiver
• Single Channel
•
418 mHz |
$
|
|
FAAC
TM1418DS Transmitter
• Single Button |
$
|
|
FAAC
TM2418DS Transmitter
• Two Button |
$
|
| |
FAAC
2664 Loop Detector
• DSP 15
• Plug
in style |
$
|
| |
FAAC
2665.1 Shadow Detector Kit
• Includes one detector base and relay for shadow loop
• 115v |
$
|
|
FAAC
3520 Battery Back-up
• BC Pro Single System Back-up
• 115v |
$
|
FAAC
3522 Battery Back-up
• BC Pro Dual System Back-up
• 115v |
$
|
Replacement
Parts |
|
FAAC
790919 455D Control Panel
• 115V |
$
|
FAAC
790930 24VDC 425D Control Panel
• Low voltage |
$
|
| |
FAAC
2194 Cable
• Master/slave five wire sold by the foot |
$/ft.
|
| |
FAAC
2114 Transformer
• 24VAC
• 100va
|
$
|
| |
|
|
 |
|
|
|
