We are the only company that is making this type of adjustable swing gate bearing hinge system. The bracket is 3/8" steel with slotted holes to receive a four hole 1" flange mount bearing. A pin with bracket is supplied to bolt or weld to the top and bottom of your gate. An adjustable hinge is essential when hanging a double gate for alignment. This type of hinge also lets you adjust any gate if the post or columns move due to settling.

Kit is supplied with 2 brackets, 2 bearings, 2 pins, and 8 bolts with washers.

Hinge Pin - 1-3/8" high
Flange Bearing - 1-1/2" high

Guide to Hinges

$145.00

Qty:

The center hinge acts like a shoulder joint, moving around in a circle and pointing off at angles.
It is easily leveled to vertical.