HySecurity SlideDriver Hydraulic Slide Gate Operator

• Rated continuous duty and are certified with a 200,000 cycle test. Many SlideDrivers in the field have opened gates for decades and have accrued over a million cycles and 20 years of service. SlideDrivers have few moving parts and obtain their power from 2 (or 4, for SlideDriver 200) hydraulic motors. Their industrial grade hydraulic system performs as well in the intense heat of the Sahara as in Alaskan permafrost.
• Fully enclosed hydraulic motor drives a rigid drive rail passing between two compressed urethane wheels for ultimate traction in dry, wet snowy, or icy conditions. SlideDriver's industrial-grade hydraulics allow for severe cold and intense heat operation (from -40F to 167F). Its motors, hydraulics and controls are securely housed in a rigid 12 gauge sheet metal chassis prime painted with a textured paint finish yielding an enduring, attractive appearance. The chassis has been tested to withstand a 1,000-hour salt spray.
• U.S. Department of Defense independent testing concluded that hydraulic, rigid drive rail slide gate operators offer significantly increased reliability and lower maintenance (higher ROI) than other slide gate drive systems.
• Features the most advanced, flexible and robust controls in the industry. The Smart Touch Controller often eliminates the high cost of add on, programmable PLCs, providing on-board integration well beyond the needs of most perimeter security applications. Programmable options include anti-tailgating, warn before operate, master/slave, partial open, and timer-to-close. Three user relays offer 26 programmable options, making it easy to connect SlideDriver to any external access control, obstruction protection, or security device and create complex vehicle entry validation, surveillance, and sequencing. Relays have normally-open or normally-closed connections.
• Smart Touch virtually eliminates arduous and costly gate system troubleshooting. Where other gate operators require time consuming, step by step access control, loop, gate edge, operator, and photo eye troubleshooting to diagnose gate "failure to operate" conditions, Smart Touch offers three exceedingly simple and formidable troubleshooting tools: a real time or downloadable fault, alert and error log that reports tailgating, gate forced open, loop failure (with HY-5A vehicle detector), and many other gate operation abnormalities. The Smart Touch LCD screen reports faults, alerts and errors, and Smart Touch LEDs light up to show circuit status. Hours of costly and complicated access control and gate system troubleshooting are saved using SlideDriver's Smart Touch troubleshooting tools.
• SlideDriver models run on nearly any available worldwide voltage. Available in DC models (UPS) that continue to operate for 3000 feet of travel during an AC power outage. Separate NEMA-3R enclosure holds two batteries and charger.
• Limited 5-year manufacturer's warranty.
• Correctional Facilities version comes with a heavier cover and three locking options
--Cover: 10 Gauge operator cover
--Locks: T-lock (lock included), Padlock hasp, or Series 1010 preparation (lock not included)
--Can be programmed for sally port, external lock mechanisms, and gate position indication.
• Modular version has a separate metal enclosure for high security, noise reduction, or special operator mounting applications.
--Electrical control box, pump, and motor assembly remotely located in a separate, metal enclosure.
--Wheel assemblies, hydraulic motors, and limit switches located in SlideDriver chassis.
--50' of 3/8" hydraulic hose included

HySecurity SlideDriver Options

HySecurity SlideDriver Accessories

HySecurity MX000079 Accessory Power Supply Kit
• Optional accessory power supply board
• 24 VDC input, 12VDC, 3 amp output