HySecurity SwingRiser Swing Gate Operator

• SwingRiser is a robust, ultra-reliable swing gate operator, opening high-design residential or secure industrial gates with an elegant lift and swing movement. It offers the ultimate in elegance, utility, reliability, security, & low maintenance.
• SwingRiser raises the gate panel a full 12 inches during its gate opening cycle. The lift & swing movement allows the gate to clear obstacles such as snow, rocks, & curbs, while also solving the problem of road gradient differences. At the end of its close cycle, the locking pin gently lowers into its ground or post mounted locking receptacle, securely locking the gate.
•SwingRiser is as equally suited for a chain-link government agency gate, as for an impressive Estate gate, where the gate is an elegant bronze, ornamental iron, or aluminum work of art.
• SwingRiser is designed to cycle gates hundreds of thousands of times with very low maintenance.

Specifications
• Opens gates up to 16' wide and 3,000 lbs. per leaf Full open cycle takes 14-30 seconds, depending on model.
• Industrial grade mechanical & electronic components including high tensile steel, over-capacity shafts & bearings, limit cams & hydraulic cylinders.
• Cylinders & limit switches are housed in the heavy duty, fully sealed post.
• Separate NEMA-3R enclosure holds the SmartTouch Controller, electric motor, pump pack, & standard hand pump.
• Manual operation can be managed using the hand pump located in the control enclosures or disengaging the index arm.
• Posts and index arm are zinc frame sprayed for rust & corrosion resistance; the outer posts may be field painted. SwingRiser also comes with support post brackets.
• Continuous duty rated (200,000 cycle certification)
• Effortless integration with HySecurity StrongArm or SlideDriver for tough anti-tailgating operation.
• Combination StrongArm, SlideDriver, SwingRiser, and HydraLift users benefit from common hydraulic & electrical components & software, reducing maintenance costs, avoiding excessive parts inventory & eliminating complex, multiple-brand troubleshooting. Facilities personnel need to know only one simple operating system.
• Superior operator and system troubleshooting using a downloadable event/fault log to troubleshoot loops, and vehicle detectors, as well as gate system, operator, and user issues. On board LCD reports real-time loop, system, operator, and user errors. Board LEDs show circuit status.
• Programmable SmartTouch Controller communicates gate status and warnings to command and control station for immediate measured security response.
• Programmable options include vehicle detector reverse or pause only, leaf delay, master/slave, outside loitering alert, and timer-to-close. Three user relays offer 24 programmable options, making it easy to connect SwingRiser to any external access control, obstruction protection, or security device, and create complex vehicle entry validation, surveillance, and sequencing without the addition of costly, custom PLCs. Relays have optional normally-open or normally-closed connections.
• Integrated security reporting to command and control software.
• Uploading new software to flash memory updates operator with latest features.
• Available in nearly all domestic and international single-phase and three-phase voltages
• Industrial-grade hydraulics certified to -40F to 167F (-40C to 75C) temperatures from bitter permafrost to broiling desert conditions.
• Limited 5 year manufacturer's warranty.

Options & Accessories
• Custom post height, taller - Standard post is 80 inches inner tube and 68 inches outter tube.
• Ground socket or post socket lock. Ground socket drops a pin into a ground mounted locking receptacle. Post socket drops a pin into a post-mounted locking receptacle. Use of a locking pin is optional.
• SwingRiser comes with several different mounting brackets: For 4-inch, 6-inch, or 8-inch round support posts using hardware designed for each; using a flat bracket to mount directly to a pilaster or wall, or using a 6-inch square mounting bracket for a 6-inch square post.
• 90 or 100 degrees of gate arc
• Left or right hand, swing in or swing out configurations
• Custom index arm height, add, or eliminate index arm
• Add, subtract, or move hinges
• Optional Uninterruptible Power Supply back-up for DC operation upon AC-power failure; separate NEMA-3R enclosure holds two batteries and charger
• Hy-5A intelligent, plug-in vehicle detectors to troubleshoot loop condition and failure, and to eliminate loop cross talk
• Bulk loop wire
• Strobe light kit
• Close timer
• Photo Eyes
• Radio receivers and transmitters
• Pushbutton station
• Edge sensors

HySecurity SwingRiser Options

HySecurity SwingRiser Accessories

HySecurity MX000079 Accessory Power Supply Kit
• Optional accessory power supply board
• 24 VDC input, 12VDC, 3 amp output