Securitron Mortise
UnLatch® Electronic Strike |
|
Mortise UnLatch is for any application where an electric strike would be used for a mortise type lock. The Mortise UnLatch includes field adjustability for latch and deadlatch positions, releases under pressure and includes a latch status monitoring output. |
Features & Benefits
• No cutting or altering of the jamb required
• Fits standard ANSI 4-7/8" strike cutout
• Also available in Polished Brass (US03) and Oil Rubbed Bronze (US108)
• Mortise, no solenoids
• Fully concealed installation
• Maintains dead-latch function at all times
• Continuous duty
• Releases under pre-load
• Latch status sensor is standard
• One model works with most North American Mortise Locks
• UL Listed
Note MUNL requires three wires for operation - continuous positive DC, continuous negative DC, and a trigger input to unlock.
|
Specifications |
| Current Draw - 12VDC |
40mA continuous, minimum 700mA when operating |
| Current Draw - 24VDC |
40mA continuous, minimum 500mA when operating |
| Higher capacity supply (1-4 Amps) is recommended for startup inrush to achieve best operation under pre-load |
| Operating Temperature |
-20° to +125°F
-29° to +52°C |
| Shipping Weight |
2 lbs. |
|
|
Warranty |
MagnaCare Lifetime Replacement Warranty |
|
MUNL-12
Mortise Electric Strike UnLatch for Mortise Locks, 12VDC |
$307.50
|
| |
MUNL-24
Mortise Electric Strike UnLatch for Mortise Locks, 24VDC |
$307.50
|
| |
MUNL-12-US3
Mortise Electric Strike UnLatch 12VDC, Bright Brass Finish |
$348.75
|
| |
MUNL-24-US3
Mortise Electric Strike UnLatch 24VDC, Bright Brass Finish |
$348.75
|
| |
MUNL-12-10B
Mortise Electric Strike UnLatch 12VDC, Oil Rubbed Bronze |
$330.00
|
| |
MUNL-24-10B
Mortise Electric Strike UnLatch 24VDC, Oil Rubbed Bronze |
$330.00
|
Fail Safe/Fail Secure Module
Allows the MUNL to become selectable for either "Fail Safe" or "Fail Secure" operation |
| |
FSUNL-12
Fail Safe/Fail Secure UnLatch Module, 12 VDC
Current Draw: FSUNL-12 - 90mA |
$74.50
|
| |
FSUNL-24
Fail Safe/Fail Secure Unlatch Module, 24 VDC
Current Draw: FSUNL-24 - 1.4mA |
$74.50
|
Accessories |
| |
STK-1
Retrofit Tab Kit for Sargent 7800 & 8200
• Required for retrofit installations |
$22.00
|
 |
|
|
|
