The Model 109950 Single Channel, 12-24v, Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.
The Model 109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with the standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp@ 30VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a transmitter set tot he same code is activated, the receiver's output will activate, triggering the gate operator.
Compatible with Stanley and Multi-Code transmitters only.
Standard Features
• 12-24VAC/DC
• Single Channel
• Whip antenna
• 3-foot antenna coax and bulkhead connector
• RF frequency: 300 MHz or 310MHz (Jumper selectable)
• 3.625"w x 5.25"h x 1.5"d |
