1-888-818-4283

Product Details

The Model MGT Gate Safety Edge Transmitter is for adding fully supervised obstacle sensing for motorized gates, doors or barrier arms in a Linear access control system. The transmitter mounts directly on the gate, door, or barrier and wires to a standard exterior safety edge sensor (for full featured compatibility, a Miller gate edge sensor with an optional .001 uF capacitor is recommended). If an object is hit during the gate closing, the sensor will present a closed circuit across the connecting wires and the MGT will transmit a message to the access controller to reverse the movement of the gate. The MGT is compatible with AE-500, AE1000Plus, AE2000Plus, and AP-5 commercial telephone entry and access controllers. It is also compatible with RE-1 and RE-2 residential telephone entry systems.

The MGT is the industry’s only fully supervised gate safety edge transmitter. It automatically sends an hourly status report to the access controller, indicating battery condition and if the transmitter is operational. Should the edge sensor be disconnected, shorted, or tampered with, the MGT will report a trouble condition.

The MGT transmitter is supplied in a weather-resistant, fiberglass box. Its circuit board is coated to prevent moisture damage. The enclosure mounts to the gate, door, or barrier arm through sealed interior mounting screws.

Features

• Safety edge transmitter
• Signals access controller for stop or reverse when safety edge activates
• No cables or coiled wires
• Mounting hardware (4 screws) supplied
• Visor clip included
• Power: Two 2450 batteries
• RF Frequency: 318 MHz
• Codes: 1,000,000+ (MegaCode format)
• Dimensions: 4.28" W x 2.875" H x 2.25" D
• Compatible with AM3Plus, AE1000Plus, AE2000Plus, AE-500, RE-1, RE-2, AP-5, APeX Controller equipped gate operators, and MegaCode receivers

Ratings Overview

(no rating information)

Frequency:	318 MHz
Battery Life:	Up to 5 years
Color:	Gray case
Full supervision:	Automatic, hourly status report to controller
Power:	Two 3V 2450 lithium batteries (supplied)
Dimensions:	4"w x 4.28"h x 2.2"d

Optional Accessories

• Receivers

  MANUAL

  Linear MegaCode MDR Receiver • 1 Channel Receiver for Garage Door Openers • Power: 24VAC/DC • Stores up to 10 transmitter codes • 318 Mhz • Wire lead antenna • Programs transmitters through the learn button . • Dimensions: 5.5 x 1.25 x 4 Click for more details & options »

  Price: $31.75 Qty:

• MANUAL

  Linear MegaCode MDR-2 Receiver • 2 Channel Receiver for Garage Door Openers • Power: 24VAC/DC • Stores up to 10 transmitter codes • 318 Mhz • Wire lead antenna • Programs transmitters through the learn button . • Dimensions: 5.5 x 1.25 x 4 Click for more details & options »

  Price: $47.55 Qty:

• MANUAL

  Linear MegaCode MDRG Receiver • 1 Channel Receiver for Gate Operators • Power: 24VAC/DC • Built in Type F Connector • 9 local antenna • Stores up to 40 codes • 318 Mhz • Programs transmitters through the learn button . • Dimensions: 5.5 x 1.25 x 4 Click for more details & options »

  Price: $48.75 Qty:

• Linear MegaCode MDRM Receiver • Replacement receiver for garage door openers • 318 Mhz • 10 transmitter capacity • Program transmitters through the learn button • Power: 24-Volt Click for more details & options »

  Price: $32.95 Qty:

• MANUAL

  Linear MegaCode MDR/U Universal Receiver • Universal receiver for garage door openers • 318 Mhz • 10 transmitter capacity • Simple plug-in design • Program transmitters through the learn button • Power: 110VAC • Dimensions: 2.52 x 2.5 x 1.61 Click for more details & options »

  Price: $39.95 Qty:

• MANUAL

  Linear MegaCode MGR 1 Channel Gate Receiver • Replaces MegaCode MDRG for Gate Operators • For use with systems where a remote antenna is needed • 318 Mhz • 40 transmitter capacity • Auto voltage sensing - no jumpers to set • Power: 12 - 30 VAC or 10.5 - 30VDC • Dimensions: 3.625 x 5.25 x 1.5 Click for more details & options »

  Price: $48.75 Qty:

• MANUAL

  Linear MegaCode MGR-2 2 Channel Gate Receiver • For Gate Operators • For use with systems where a remote antenna is needed • 318 Mhz • 40 transmitter capacity • Auto voltage sensing - no jumpers to set • Power: 12 - 30 VAC or 10.5 - 30VDC • Dimensions: 3.625 x 5.25 x 1.5 Click for more details & options »

  Price: $50.00 Qty:

Product Manuals

• linear-mgt-safety-edge-manual.pdf

Product Brochures

There are no reviews for this product.

Write a review »