- AAS
- Access Products
- ACE
- Adams Rite
- AeGIS
- Aerotech
- AGW
- AiPhone
- All-O-Matic
- Alloy Castings
- Allstar
- Alvarado
- Ameriline
- Apollo
- BD Loops
- BEA
- Belden
- Bommer
- Byan
- Cansec
- CelAccess
- Click2Enter
- Codelock
- Cornerstone
- Counsel Industries
- Cyrex
- D&D
- DC Solutions
- Diablo Controls
- Ditek
- Doorking
- Duragate
- Eagle
- EbelCo
- Elite
- Elk
- EMX
- FAAC
- Gibcloser
- Guardian Hardware
- Guardian Traffic
- HID
- HySecurity
- International
- Kaba
- Kant-Slam
- Keedex
- Knox
- Kwikset
- Liftmaster
- Linear
- Locinox
- Lockey
- Lokk-Latch
- Master
- Miller
- MK Battery
- MMTC
- Modesto
- Morningstar
- Multicode
- Osco
- Papaiz
- PDQ
- Pedestal CEO
- PowerGuard
- Q-SEAL
- Ramset
- Reno
- Revere
- Ritron
- Rofu
- Schlage
- SEA
- Seco-Larm
- Securitron
- Sentex
- SIRIT
- Sunwise
- Transmitter Solutions
- Trine
- Ultra
- US Automatic
- Viking
- Yingli
- Zareba
Miller Edge PH-T-1 Invisi-GUARD Thru Beam Photo Eye
Category: Photo Eyes
Image 1 of 1. Click image to enlarge.
Product Details
Invisi-Guard™ thru-beam photoelectric sensor is intended to detect the presence of an obstacle when the infrared light beam is interrupted. Suggested applications include motorized doors and gates where an interruption would signal the motor to reverse; toll booths and parking lots where an interruption would cause a signal to change. The system includes two independently housed units: a battery powered infrared emitter and a receiver that wires directly to your controls. The battery powered emitter saves time and money by eliminating the need to saw concrete or run wire across the opening. The built-in audible low battery alarm alerts users when it is time to replace batteries.
Ratings Overview
(no rating information)| Detection Technology: | Infrared thru-beam |
|---|---|
| Infrared Wavelength: | 940nm |
| Maximum Range: | 30 feet (9.14m) |
| Response time: | <100 msec |
| Alignment Angle: | ±10° |
| Operating Temperature: | -22° F to 140°F (-30° C to 60° C) |
| Power Supply (Em): | 2 X 1.5V, 3 Ah, Lithium AA |
| Power Supply (Rx): | 10-35 V AC/DC, 50/60 Hz |
| Current Conumption (Em): | <350μA |
| Current Conumption (Rx): | Relay energized 80mA; Relay de-energized 30mA |
| Battery Life: | 1 year |
| Low Battery Indicator: | Yes, audible alarm |
| Alarm Output: | 85dB |
| Relay Rating: | 1A @ 24V |
| Enclosure: | NEMA 4 |
| Enclosure Dimensions: | 5"d x 2.06"w x 1.56"h |
| Mounting Method: | Wall or Post |
| Certification: | ANSI/UL325 |