- AAS
- Access Products
- ACE
- Adams Rite
- AeGIS
- Aerotech
- AGW
- AiPhone
- All-O-Matic
- Alloy Castings
- Allstar
- Alvarado
- Ameriline
- Apollo
- BD Loops
- BEA
- Belden
- Bommer
- Byan
- Cansec
- CelAccess
- Click2Enter
- Codelock
- Cornerstone
- Counsel Industries
- Cyrex
- D&D
- DC Solutions
- Diablo Controls
- Ditek
- Doorking
- Duragate
- Eagle
- EbelCo
- Elite
- Elk
- EMX
- FAAC
- Gibcloser
- Guardian Hardware
- Guardian Traffic
- HID
- HySecurity
- International
- Kaba
- Kant-Slam
- Keedex
- Knox
- Kwikset
- Liftmaster
- Linear
- Locinox
- Lockey
- Lokk-Latch
- Master
- Miller
- MK Battery
- MMTC
- Modesto
- Morningstar
- Multicode
- Osco
- Papaiz
- PDQ
- Pedestal CEO
- PowerGuard
- Q-SEAL
- Ramset
- Reno
- Revere
- Ritron
- Rofu
- Schlage
- SEA
- Seco-Larm
- Securitron
- Sentex
- SIRIT
- Sunwise
- Transmitter Solutions
- Trine
- Ultra
- US Automatic
- Viking
- Yingli
- Zareba
Miller MWRTA02A Wireless Transmitter & 1-Channel Receiver
Category: Safety Edges & Sensing Devices
Image 1 of 1. Click image to enlarge.
Product Details
The Miller Edge Model MWRTA02 gate and door edge transmitter is designed to provide obstacle sensing protection for a variety of motorized gates and doors. It is easily mounted and wired to the gate or door edge sensor. When the Sensing Edge comes into contact with an obstruction, a closed circuit signal is created and is sent to the transmitter. The transmitter relays the information to the receiver and the receiver passes the message along to the operator motor. The gate or door stops movement instantaneously and will then reverse the direction of travel.
Both the Miller Edge receiver and transmitter have a compact design which allows for easy trouble shooting via the see-thru case. Selectable features include: coded dip switches and a wire harness for relay options.
The MWTA02 Transmitter come standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.
Features
• 318 MHz
• 19,683 Programmable Transmitter Codes
• 100 Ft Range
• MWTA02 Transmitter with Audible Alarm Housed in Weather-Proof NEMA 4 Rated Enclosure
• Note: MWR02A Receiver is Intended for Indoor Use or Inside a Water Resistant Enclosure
Ratings Overview
(no rating information)
Specifications
Model #MWTA02 Transmitter with Audible AlarmEnclosure Material: Polycarbonate
Enclosure Color: Black
Enclosure Rating: NEMA 4 including cable fitting
Weight: 7.2 Ounces
Response Time: Nominal 30 msec.
Operating Temperature: -4ºF to 140ºF (-18Cº to 60ºC)
Operating Frequency: 318 Mhz.
Maximum Operating Distance: 100 Feet
Power: 9 Volt Lithium Battery
Audible Alarm: Included for monitoring the life cycle
of the battery. Alarm is 80-95 dB at 2’
Transmitted Signal Duration: 4 to 6 seconds
Mounting: #6 self drilling screws included
Model #MWR02A Receiver
Enclosure Material: Polycarbonate
Enclosure Color: Smoke
Mounting: 2 side flanges - (See Diagram)
Operating Frequency: 318 MHz
Modulation: On Off Keying
Code: Tri-state, Fixed, 1 of 19683 codes
Power Requirements: 10 to 40 VDC, 10-29 VAC (RMS)
Power Consumption: 13 mA (avg.) with Relay Off
50 mA (avg.) with Relay On
Output: Dry Relay Contact, N/O & N/C 0.5A@120 VAC; 1A@30 VDC
Antenna: Attached, 18” #22AWG PVC insulated and
Female F connector (grounded shell)
Weight: 4.4 Ounces
Connections: Wire, #22AWG, Red = Power Input, Black = Power Ground
White = Relay Common, Orange = Relay Normal Closed
Yellow = Relay Normal Open
Indicators: Green LED = Power On, Red LED = Relay Active (address decoded)
Address Decode Switch: 9 position, tri-state, DIP
(19,683 programmable receiver codes)
Storage Temperature: -40ºF to +140ºF (-40ºC to +60ºC)
Operating Temperature: -4ºF to +140ºF (-20ºC to +60ºC)
Operating Humidity: 0 to 95% R.H., non-condensing
Maximum Operating Distance: 100 Feet
Electrical Configuration: Optional N/O or N/C
Optional Accessories
-
Transmitters
-
Safety Edges
-
Radio Antennas