Pre-Made Aluminum Gates & Fencing |
|
| Standard line of premium fence and gate panels are fully welded and made of heavy gauge aluminum. Also offering a premium quality line of fencing that is rackable up to 34 inches over eight feet. Mounting hardware and clearly written and diagrammed instructions make installation a breeze. |
|
|
 |
 |
Aluminum Specifications
Side Rails: 1/4"
Pickets: 1/8"
Picket Spacing: 4"
Fully Welded
Long lasting, low maintenance us resistant powder coating |
Pre-Made Steel Gates & Fencing |
|
| Standard line of premium fence and gate panels are fully welded and made of heavy gauge steel. Also offering a premium quality line of fencing that is rackable up to 34 inches over eight feet. Mounting hardware and clearly written and diagrammed instructions make installation a breeze. |
|
|
|
|
Steel
Specifications
Frame Ends: 2" x 2" x 11 Gauge Steel Tubing
Frame Tops & Bottoms: 2" x 2" x 14 Gauge Steel Tubing
Rails: 1-1/2" x 3/4" x 1/8" Punched Steel Channel
Pickets: 3/4" x 3/4" x 16 Gauge Steel Tubing
Picket Spacing: 4"
Finish: UV Resistant Powder Coated |
Custom Made Aluminum Gates & Fencing |
|
| Large
Aluminum Gate Selection, Driveway & Garden Aluminum Gates. There is a difference in aluminum gates. These are
heavy gauge powder coated gates with stakes that are centered in
the frame and welded all the way around as apposed to welded to
the back of the frame. |
|
|
 |
|
CONSTRUCTION
DETAILS
2" x 1" x 1/8" CHANNEL TOP FRAME & CHANNEL BRACE
2" x 2" x .092" SQUARE SIDE FRAMES
1" x 1" x.062" PICKET
2" x 1" x 1/8" CHANNEL BRACE & BASE FRAME |
WALK GATES:
We offer our standard styles as well as custom designed pedestrian
gates. Hardware necessary to mount a latch or lock is fitted at
your request.
CANTILEVER GATES:
Our roller and track hanging system provides a solid but good looking
solution to the problem of how to hang ornamental gates. The use
of a dual v-track assembly as an integral part of our gate allows
us to mount curved and finial top gates with no problem. We use
ball bearing polytech wheels for smooth and quiet operation.
ENCLOSED TRACK CANTILEVER GATES:
We offer a gate with this type of suspension system for applications
where the look of an enclosed track system is desired. The gate
is supported and guided by a C-track which encases the small rollers
of a truck and trolley assembly.
OVERSIZED GATES:
Our standard prices apply to gates for
openings up to 20' wide. Our standard prices apply to gates with
an installed maximum height of 7' (allowing for 4" ground clearance).
Larger gates are quoted with special powder-coating and transportation
prices. |
 |
|
|
|
