Home            View Cart

Information Center

Gates

Gate Operators

Access

Accessories

Support

Slide Gate Hardware

Chain & Accessories
Doorking 2600-818 Endless Idler Assembly.
• Used when placing slide gate operators at end of track.
• This makes it possible to place operator out of sight.
• The chain is moved off the gate as well for a cosmetically pleasing installation.
$70.00
Qty:
Slide Gate Chain Tensioner Bolts.
• Two sizes available
1/2" - $8.50
3/8" - $6.50
Qty:
Extra Chain for slide gate operators.
• 10' with 1 master link
• Check with operator model to determine chain size.
• 10' #41 Chain with 1 master link
• 10' #40 Chain with 1 master link
#41 - $35.00
#40 - $45.00
Qty:
DoorKing chain for slide gate operators
• 20' & two master links
• DK2600-485 #50 Chain
• DK2600-448 #60 Chain
#50 - $118.25
#60 - $132.50
Qty:

Guide Rollers
Guide Rollers For Slide Gates.
• Two are required.
Hard Plastic, Premium Quality, Won't mar gate
GR3KTPL 3"hx1-3/4"dia    total offset 2-1/8"
GR6KTPL 6"hx1-3/4"dia   total offset 2-1/8"
GR12KTPL 12"hx1-3/4'dia   total offset 2-1/8"
Rubber with Weldable Mounting Brackets
GR3KT 3"hx2-1/2"dia    total offset 2-7/8"
GR6KT 6"hx2-1/2"dia    total offset 2-7/8"
GR12KT 12"hx2-1/2"dia   total offset 2-7/8"
3" Plastic - $23.95
6" Plastic - $27.95
12" Plastic - $47.95

3" Rubber - $11.95
6" Rubber - $18.95
12" Rubber - $25.95
Qty:

Roller Assembly For 2" Wide Gates.
• Heavy duty angle iron and white non marking hard plastic rollers.
• Uses 3/16 x 1-1/2" angle iron.
• Has stainless steel axles.
• 6" or 12" high
6" - $78.00
12" - $110.00
Qty:

Gate Catchers
DoorKing 1204-004 End Retainer (Gate Catcher)
• Designed for slide gates with 2-inch frame
• Capped retainer prevents gate from being lifted off track
• Increases security
• Beveled opening
$50.00
Qty:

#GS Sliding Gate Mooring (Gate Catcher)
• Hard plastic U.H.M.W. Liner
• Preset for 2" wide gate
$39.95
Qty:

Wheels

AGW Magnum Wheel
• V-Groove Steel
• Cold Rolled
• Sealed Bearings
• 4" - 1/2" axle bolt; 4000 lb. capacity
• 6" - 5/8" axle bolt; 5000 lb. capacity
• 5 Year limited warranty
4" - $57.00
6" - $87.00
Qty:
Elite Hard Plastic (UHMW) V-Groove Wheel.
• Has a 1/5" pregnated bronze bushing
• Comes with axle bolt & nut.
• 1/2" axle diameter
• 2" hub width
• Designed for 1" v-groove tracks.
• 4"high x 1-3/4" wide - 400 lbs.
• 6" high x 1-3/4" wide - 600 lbs.
4" - $26.00
6" - $61.00
Qty:

Elite Power2 V-Groove Wheel.
• Hub width 2"
• 4" has two 2" sealed bearings with 1" axle - .5" x 3.25" axle bolt and nut - 4"x1-3/4" - 3,000 lbs
• 6" has two 2.5" sealed bearings with 1.18" axle - .625"x3.25" axle bolt and nut - 6"x1-3/4" - 5,000 lbs
• Heat treated finishing for long maintenance free life.
4" - $92.00
6" - $155.00
Qty:

Elite Power V-Groove Wheel.
• Cold roll steel V-Groove wheel.
• Hub width 2"
• Designed to be maintenance free.
• Gold Zinc Plated with Sealed Ball Bearings.
• Designed for high traffic commercial sliding gate track applications.
• 4": two 2" sealed bearings with 1" axle - .5"x3.25" bolt with nut - 4"h x 1.75"w - 3,000 lbs.
• 6": two 2.5" bearings with 1.18" axle - .625"x3.25" bolt with nut - 6"h x 1.75"w - 5,000 lbs.
4" - $55.00
6" - $102.00
Qty:

Steel Wheel Box.
• 11 Gauge thick 9/16 dia. hole. (The 9/16" hole will need to be drilled to 5/8" to fit.)
• Fits 2-1/2" Hub Width.
• 4" Standard: 3"h x 5"w x 2-3/4" d
• 6" Standard: 4"h x 7"w x 2-3/4" d
• 4" Slim: 3-1/8"h x 4-7/8"w x 2-1/4" deep

4" Slim & Standard - $16.95
6" - $18.95
Qty:

Cantilever Gate Hardware
Hard Plastic UHMW Pipe Track Wheel Hard Plastic U.H.M.W. 5" Pipe Track Wheel
• Fits 1-5/8" O.D. Pipe
• 5/8" Dia. x 3" Bolt
• Bronze Sleeve
• White Plastic
• Bracket Included
• Sold Individually		 $91.20
Qty:
Heavy Duty Pipe Track Wheel Heavy Duty 5" Pipe Track Wheel
• 1-5/8" Pipe Slot
• 5/8" Dia x 6" Bolt
• Weight Rating - 6000 lbs.
• Cold Rolled Hardened Steel with Zinc Plated Finish
• Sealed Bearings
• Sold Individually		 $178.00
Qty:
Nylon Cantilever Roller Nylon Cantilever Roller for Round & Square Posts
• 2 Post Sizes Available
• Optional Cover Available
• Sold Individually		 3" Post - $135.00
4" Post - $155.00
Qty:

Cantilever Roller Safety Cover Cantilever Roller Safety Cover
• Injected Molded High Impact Polymer Casing
• Sold Individually		 $95.00
Qty:

Deadbolt and Track
DuraGate Deadbolt Hook For Slide Gates.
• Weld-on deadbolt keyed both sides.
• This unique lock allows you to lock slide gates easily.
• Size is: 1-3/4" wide X 2" deep X 7" tall.
$39.00
Qty:
Modesto Power Track 3500 V-Track for Sliding Gates
• 90° angle
• Galvanized steel
• 8-foot or 10-foot lengths 3.5" x 1/5"
• has holes for anchoring to concrete
• can be used in dual track applications as shown or single track
• V-Groove wheels sold above

8' - $35.00
10' - $50.00
Qty:
  Click here for Swing Gate Hardware