DoorKing Operator & Gate Accessories

DoorKing Slide Gate Accessories.

DoorKing Guarded Guide Rollers.
• Used in slide gate applications.
• Single and double rollers available.
• Guarded to meet current industry safety standards.

DoorKing Chain Idler Assembly
• Used when slide gate operators are rear-mounted.

DoorKing End Retainer (Not shown)
• Guide for slide gates to slip into
• Prevents the gate from being lifted off the track when it is in the fully closed position.

DoorKing V-Wheels.
• Ride on an inverted "V" type track
• Replacement wheel or custom wheel mounting

DoorKing V-Wheel Assemblies.
• Ride on an inverted "V" type track
• Guarded & include mounting brackets
• Designed for 2-inch wide gate rails

DoorKing Tandem V-Wheel Assemblies.
• Ride on an inverted "V" type track
• Ideal for heavy gates
• pivoting bracket & tandem arrangement allows total weight of gate to be evenly distributed across a larger portion of the V-Track.

DoorKing Swing Gate Accessories.

DoorKing Flange Bearing Hinge
• Designed for gates with 2-inch square framing.
• Heavy-duty hinge designed for high traffic applications
• Each pair can support up to a 3000-lb. gate.

DoorKing Sealed Bearing Hinge
• Standard (2000 lbs.) or Heavy Duty (3000 lbs.)
• Round or square gate frames

DoorKing Torsion Rod Assembly
• Provides a method to counter-balance the gate to prevent gate runaway
• relieves pressure on the gate operator.
• By adding additional torsion rods (6 maximum), heavier gates can be accommodated.

DoorKing Secondary Entrapment Prevention Devices
• Loop Detectors, Loops and Accessories.

• Photoeyes.

• Contact Sensors

DoorKing Interior Control Stations.
• Keypads, Key Switches, Exit Buttons.
• Designed to be installed into a single-gang electrical box
• Can be used in a variety of applications.

DoorKing Gate Operator Control Stations.
• Interior & Exterior control stations
• Gate control devices providing manual operation and control of automated vehicular gates.