Elite
Operators and Access Systems |
|
Note:
All Elite Gate Operators come with a Liftmaster 312 Receiver
installed for use with the Liftmaster Remote LM371(sold
separately) except the Miracle One
.
|
|
Swing
Gate Operators |
|
|
Elite
CSW-200 High Traffic Swing Gate Operator.
• 18' wide x 600 lbs. or 22' wide x 1000 lbs.
• 120 VAC; 1/2 HP, 1 hp, or Dual Motor
• Single or Dual Operator
• Emergency Release Handle
• Shipping Weight: 190 - 199 lbs.
• Limited Warranty: 5 Years Commercial; 7 Years Single Home
Residential |
|
|
Elite
Roboswing Swing Gate Operator. (Elite R-900)
• For gates 16' wide and 400lbs
• 12 VDC with Built in Battery Backup.
• Not compatible with Elite A-ELD Loop Detector - Use EMX
Loop Detector & Harness
• Can operate off low voltage transformer or solar panel.
• Shipping Weight 175-lbs.
• Three Year Limited Warranty
Note:
For Master/Slave situations purchase two Q203 Modules.
See below |
|
| |
Slide
Gate Operators |
|
|
Elite
SL-3000 High Traffic Slide Gate Operator.
• 37' wide x 1000 lbs. or 37' wide x 2000 lbs.
• 120 VAC; 1/2 HP, 1 hp, or Dual Motor
• Single or Dual Operator
• Emergency Release Crank
• Comes with 25' of #41 chain.
• Shipping Weight: 160 lbs.
• Limited Warranty: 5 Years Commercial; 7 Years Single Home
Residential
Note: Extra
chain available in 10' lengths, see bottom of page. |
|
|
Elite
Roboslide Slide Gate Operator.
• 20' wide x 800 lbs.
• 12 VDC with Built in Battery Backup.
• Not compatible with Elite A-ELD Loop Detector - Use EMX
Loop Detector & Harness
• Can operate off low voltage transformer or solar panel.
• Single or Dual Operator
• Comes with 20' of #41 chain.
• Shipping Weight: 104 lbs.
• Three Years Limited Warranty
Note: Extra
chain available in 10' lengths.
For Master/Slave situations purchase two Q203 Modules.
See bottom of page. |
$1175.00
|
| |
Linear
Gate Operators |
|
|
Elite
Miracle One Ram Arm Single Swing Gate Operator.
• 15' wide x 600 lbs.
• 12 VDC with Built in Battery Backup.
• Can operate off low voltage transformer or solar panel.
• Has slow down feature so gates do
not close hard or shudder
• Includes Liftmaster
355 Receiver
• Shipping Weight: 69 lbs.
• Two Years Limited Warranty
Note:
This unit can be difficult to adjust, all tech support will be refered
to Chamberlain. |
|
Elite
Miracle One Ram Arm Dual Swing Gate Operator.
• 15' wide x 600 lbs.
• 12 VDC with Built in Battery Backup.
• Can operate off low voltage transformer or solar panel.
• Has slow down feature so gates do
not close hard or shudder
• Includes Liftmaster
355 Receiver
• Shipping Weight: 69 lbs.
• Two Years Limited Warranty
Note:
This unit can be difficult to adjust, all tech support will be
refered to Chamberlain.
|
$1640.00
|
|
Gate
Operator Options and Accessories |
|
 |
Elite
DC-2000 Battery Back Up Unit |
$398.00
|
 |
Elite
A-ELD Plug In Loop Detectors.
• This unit plugs into all the Elite CSW-200 & SL-3000
new boards.
• Please check your unit for compatability if it is an older
unit. |
$120.00
|
 |
Elite
Q203 RoboSwing/RoboSlide Auxiliary Module.
• Required
when connecting two Roboswings together for a bi-parting gate.
• Two boards needed for master/slave
operation.
• Can also be used for magnetic
locks and shadow loops. |
$49.00
|
 |
Elite
APOW-1 18VAC Plug-in Transformer
• Supplied with RoboSwing and
RoboSlide when not using solar panels for power. |
$30.00
|
 |
Elite
ABT-12 Replacement Battery.
• For the Elite Roboswing and
the Elite Roboslide gate operator |
$55.00
|
 |
Unisolar
Solar Panel 64 Watt.
• Excellent panel for Roboswing and Roboslide.
• High impact plastic surface helps prevent vandalism.
• 2'x4' panel. |
$495.00
|
 |
Revere
High Quality Low Voltage Transformers.
• Plug-in transformer.
• Has built in fuse.
• MOV surge protection.
• 24 volt AC 40 VA or 16 volt AC 20 VA
• Suitable for RoboSwing or RoboSlide Gate
Operator |
24VAC
$22.00
18VAC $18.00
|
| |
Telephone
Entry Systems |
|
 |
Elite
EL2000 Telephone Entry/Access Control System
• Up to 2,000 directory or access codes
• Base Unit with optional plug in modules available
• Simplified Installation
• Simplified Programming
• Optional lighted paper directory |
|
 |
Elite
EL25 Telephone Entry System.
• Residential & commercial use.
• From 1 to 25 Occupants
• 250 Access Codes
• Up to 7 units can share the same phone line.
• Do Not Disturb, Call Forwarding, Call Waiting
• Recessed & Lighted |
|
 |
Elite
Dial Code Telephone Entry System.
• Large LCD or Super Bright VF Display
• 25 to 1000 resident names
• RS485 Remote Communicator Link for 31 additional devices
• Remote programming via modem using ElitePro software
• Built-in battery backup and surge protection
• Expansion slots
• Digital voice help messages
• Field upgradable memory chips
• 120VAC
• 3 year limited warranty |
|
 |
Elite
Icon-26 Telephone Entry System.
• 250 to 1000 resident names
• Remote programming via modem using ElitePro software
• Built-in battery backup and surge protection
• Expansion slots
• Digital voice help messages
• Field upgradable memory chips
• 120VAC
• 3 year limited warranty |
|
 |
The
Elite TA-Phone-Stand Tower
• Houses the Elite Entry Phone Systems.
• Ideal solution for free standing installations.
• High tech design and easily accessible storage for optional
accessories and wiring.
• High tech design
• Powder Coated stainless teel construction
Elite
Tower 1 for auto access
Elite Tower 2 adds 15 inches to Tower 1 for pedestrian
access |
Twr
1 $1012.50
Twr 2 $265.00
|
| |
Hardware |
|
|
Goosenecks for Pushbuttons,
Telephone Entry Systems, Keypads, Intercom Systems, Card Readers |
• Pad Mount |
• DoorKing |
• Post Mount |
• GateDepot |
• Dual Mount |
• Linear |
• Archetectural Syle |
• Sentex |
|
|
|
Elite
Power Hinge.
• Heavy duty, super quiet hinges
• Manufactured with double ball bearings.
• Pivots on a 3/4" grounded and tempered, solid stainless
steel shaft.
• 3" hinge gap.
Power Hinge 1
• Steel Both Sides for steel gates and post
• Rating: 3,000 lbs.
Power Hinge 2
• Combo for aluminum gate with steel post
• Rating: 1,000 lbs.
Power Hinge 3
• Aluminum both sides for aluminum post & gate
• Rating: 1,000 lbs. |
PH1 - $115.00
PH2 - $114.00
PH3 - $113.00
|
 |
Hard
Plastic (UHMW) V-Groove Wheel.
• For lighter slide
gates
• 1/5" pregnated bronze bushing
• Designed for 1" v-groove tracks.
• Width: 1-3/4", Axle Diameter: 1/2", Hub Width:
2"
• Includes Axle and Nut
• 4" high - Rating: 400 lbs.
• 6" high - Rating: 600 lbs. |
4"
- $23.95
6" - $55.95
|
 |
Elite
Power V-Groove Wheel.
• Made from solid, cold rolled steel and gold zinc plated.
• For high traffic commercial sliding gate track applications.
• 4" Wheel - Hub width: 2", sealed bearings with
1/2" axle and .5"x3.25" bolt with nut, 1-3/4"
wide. Rating: 3,000 lbs.
• 6" Wheel - Hub width: 2", sealed bearings with
5/8" axle and .625"x3.25" bolt with nut, 1-3/4"
wide. Rating: 5,000 lbs.
|
4"
- $50.95
6" - $95.95
|
 |
Elite
Power2 V-Groove Wheel.
• Made from solid, heat treated rolled steel.
• For high traffic commercial sliding gate track applications.
• 4" Wheel - Hub width: 2", sealed bearings with
1/2" axle and .5"x3.25" bolt with nut, 1-3/4"
wide. Rating: 3,000 lbs.
• 6" Wheel - Hub width: 2", sealed bearings with
5/8" axle and .625"x3.25" bolt with nut, 1-3/4"
wide. Rating: 5,000 lbs.
|
4" - $85.95
6" - $145.95
|
 |
Elite APSA Positive Gate Stop.
• Aluminum positive stop with two rubber grommets. |
$50.00
|
 |
|
|
|
