FAAC
Swing Gate Operators |
|
FAAC
Ram Arm Gate Operators
For
IN swinging gates (as seen from inside property) with masonry
columns, installer must notch the columns in order for operator
to swing freely. |
 |
FAAC
400 Hydraulic Ram Arm for Single Gate.
• From 12 ft x 900 lbs. to 18 ft x 1500
lbs.
• Designed for situations needing maximum
versatility such as apartment, subdivision, commercial/industrial
and residential applications.
• Adjustable hydraulic pressures to control force
• Minimized pinch points
• Hydraulic locking of the gate available in open and/or closed
position
• Two year limited warranty |
|
 |
FAAC
402 and 422 Hydraulic Swing Gate Operator.
• 10 ft x 900 lbs.
• Designed for light duty gate systems & are
not recommended for solid gates.
• Adjustable hydraulic pressures to control swing
• Minimized pinch points
• Hydraulic locking of the gate available in opened and/or
closed position
• Quiet Operation
• Self lubricating for long life
|
|
|
FAAC
412 Electromechanical Swing Gate Operator.
• 14 ft. x 500 lbs.
• Ideal for light residential applications
• Mechanical locking in the opened and closed positions
• Easy interconnection of loop detectors, photocells, etc.
to reverse a gate if an obstacle is sensed
• Easy interconnection of actuating devices like remote control
radios, key pads and telephone entry systems
• On-board diagnostic LEDs
• Convenient manual release in case of power failure |
|
 |
FAAC
415 Electromechanical Swing Gate Operator
• 15 ft. x 500 lbs.
• Designed for Residential Use
•Two Year Limited Warranty
• Sleek design
• Operates even in case of power failure (with optional battery
back-up and subject to battery condition)
• Reverse on contact
• Slow down "soft stop" |
|
FAAC
Swing Gate Operators |
 |
FAAC
390 Electromechanical Swing Gate Operator
• From 10 ft x 400 lbs.
• Designed for Residential Use
• Two Year Limited Warranty
• Easy Installation
• Operates even in case of power failure (with optional battery
back-up and subject to battery condition)
• Reverse on contact
• No gate modifications are necessary |
|
FAAC
Underground Gate Operators |
 |
FAAC 770 Electromechanical Underground Swing
Gate Operator.
• 10 ft x 800 lbs.
• Designed for Residential Use
• Two Year Limited Warranty
• Invisible Installation
• Operates even in case of power failure (with optional battery
back-up and subject to battery condition)
• Reverse on contact
• Slow down "soft stop." |
|
 |
FAAC
760 Underground Hydraulic Swing Gate operator
• 8ft, 10 ft or 13 ft x 1300 lbs.
• Drive and power units are
combined together in-ground
•Hydraulic Actuation
• Adjustable hydraulic pressures to control swing
• Minimized pinch points
• Quiet Operation
• Opening of up to 148 degrees |
450mps--455mps
|
 |
FAAC
750 Underground Hydraulic Gate Operator.
• 14 ft x 500 lbs.
• Provides an "invisible"
installation by placing the drive unit below ground
• Hydraulic Operation
• Adjustable hydraulic pressures to control swing
• Minimized pinch points
• Quiet Operation
• Opening from 110 to 180 degrees
|
|
FAAC
Slide Gate Operators |
 |
FAAC
740 Rack & Pinion Slide Gate Operator
• 30 ft x 880 lbs.
• Rack & pinion operator for residential use
• Two Year Limited Warranty
• Gate automatically locks when not operating
• Optional Battery Back-up
• Convenient Manual release
• External limits |
|
FAAC
Options and Accessories |
 |
FAAC
Battery Back-Up Units
• Uninterruptible power back-up
• Single Operation, Multiple Operation, or Fail Secure Operation
|
|
 |
FAAC
Slide Gate Operator Options and Accessories
• Chain, Gear Racks, Mounting Hardware, Installation
Kits |
|
 |
FAAC
Entry Systems
• Keypads, buttons, key switches, telephone entry systems |
|
 |
FAAC
Safety & Security Devices
• Photoeyes, Locks, Loops |
|
 |
FAAC
Electrical & Hardware Devices
• Surge Protectors, Goosenecks, Enclosures |
|
| |
 |
|
|
|
