Linear Access Control Systems
MultiCode - 300 MHz |
Receivers |
 |
MultiCode 109020
1-Channel Garage Door Receiver
• Two-way lugs fit under terminal screws or accept push-on
terminals
• 11" wire antenna supplied
• Three tabs for universal operator mounting
• Power: 24V
• No need for separate transformer or adapter
• Frequency: 300 MHz
• Codes: 1,024 - set by 10 dip switches
• Dimensions: 3" x 5.5" x 1.5" |
$50.00
|
 |
MultiCode 109950
1-Channel Gate Receiver
• MultiCode or Stanley compatible
• Replaces MCS109930, MCS 109940, & MCS 109931
• Single Relay
• Supplied with whip antenna, 3' of coaxial cable & bulkhead
connector
• Auto voltage sensing
• Power: 12-24 VAC/ VDC
• Dual Frequency: 300 MHz & 310 MHz
• Codes: 1,024 - set by dip switches
• Dimensions: 3.625" x 5.25" x 1.5" |
$52.25
|
 |
MultiCode 109920
1-Channel Gate Receiver
• For use inside metal enclosures & other applications
requiring stronger signal reception
• Antenna with coaxial connector supplied
• Power: 115VAC
• Transformer included
• Frequency: 300MHz
• Codes: 1,024 - set by dip switches
• Dimensions: 5.25" x 3.625" x 1.5" |
$56.25
|
|
Multicode 302850
2-Channel Gate Receiver
• MultiCode or Stanley compatible
• Replaces MCS 302801 & MCS 203102
• Two Relay
• Supplied with whip antenna, 3' of coaxial cable & bulkhead
connector
• Auto voltage sensing
• Power: 12-24 VAC/VDC
• Dual Frequency: 300 MHz & 310 MHz
• Codes: 512- set by dip switches
• Dimensions: 3.625" x 5.25" x 1.5" |
$63.00
|
 |
MultiCode 302101 2-Channel Heavy
Duty Gate Receiver
• For any application requiring
2 channels in one location
• Up-down, open-emergency-stop,
and other functions
• Power: 24 VAC
• Frequency:
300 MHz
• Codes: 512 each channel- set by dip switches
• Dimensions: 6" x 8" x 4"
|
$137.95
|
Transmitters |
 |
MultiCode 306010 1 Button Key
Ring Transmitter
• Test/operate LED
•
Molded-in hole to accept keychain or keyring
• Supplied
velcro strip for visor or dashboard mounting
• Operates
with all Multi-Code receivers & transmitters
• Power:
12V battery
• Frequency: 300 MHz
• Codes: 1,024
- set by dip switches
• Dimensions: 2.5" x 1.5"
x .625" |
$20.50
|
 |
MultiCode 307010 1-Channel Key
Ring Transmitter
• Test/operate LED
•
Molded-in hole to accept keychain or keyring
• Supplied
velcro strip for visor or dashboard mounting
• Operates
with all Multi-Code receivers & transmitters
• Power:
12V battery
• Frequency: 300 MHz
• Codes: 1,024
- set by dip switches
• Dimensions: 2" x 1.5"
x .625" |
$21.00
|
 |
MultiCode 308301 2-Channel Key
Ring Transmitter
• Test/operate LED
•
Molded-in hole to accept keychain or keyring
• Supplied
velcro strip for visor or dashboard mounting
• Operates
with all Multi-Code receivers & transmitters
• Power:
12V battery
• Frequency: 300 MHz
• Codes: 1,024
- set by dip switches
• Dimensions: 2.5" x 1.5"
x .625" |
$27.00
|
 |
MultiCode
308911 1-Channel Visor Transmitter
• Test/operate LED
• Molded design to fit the hand
• Easy access to battery & dip switch
• Operates with all Multi-Code receivers & transmitters
• Power: 9V battery
• Frequency: 300 MHz
• Codes: 1,024 - set by dip switches
• Dimensions: 3.75" x 2.5" x .875" |
$16.50
|
 |
MultiCode 412001 2-Channel
Visor Transmitter
• Test/operate LED
•
Molded design to fit the hand
• Easy access to battery &
dip switch
• Operates with all Multi-Code receivers &
transmitters
• Power: 9V battery
• Frequency:
300 MHz
• Codes: 1,024 - set by dip switches
•
Dimensions: 3.75" x 2.5" x .875" |
$22.25
|
 |
MultiCode
414001 4-Channel visor Transmitter
• Test/operate LED
• Molded design to fit the hand
• Easy access to battery & dip switch
• Operates with all Multi-Code receivers & transmitters
• Power: 9V battery
• Frequency: 300 MHz
• Codes: 1,024 - set by dip switches
• Dimensions: 3.75" x 2.5" x .875" |
$25.50
|
Safety Edge Transmitter |
 |
Multicode
302210 Safety Edge Transmitter
• For use with safety edges on gates & large commercial
doors
• Can be used where hard wires are impractical
• Easy to install & mount
• More economical than coil cord sets
• Power: 9 Volt battery supplied
• Frequency: 300 MHz
• Codes: 1,024 - set by dip switches
• Dimensions: 4"x 4.28" x 2.2" |
$89.00
|
Keypad |
 |
MultiCode 420001 Wireless
Keypad
• Tamper-resistant & weatherproof
• Easy mounting with two screws
• 12-button, alphanumeric
keypad
• LED mode indicator
• Power: 9 Volt battery
supplied
• Frequency: 300 MHz
• Codes: 4-digit
PIN code access
• Dimensions: 2.75"x 6.25" x 1" |
$38.75
|
Multicode - 310 MHZ
Stanley Compatible
Receivers |
|
MultiCode
309013 1-Channel Receiver
• Two-way lugs fit under terminal screws or accept push-on
terminals
• 11" wire antenna supplied
• Three tabs for universal operator mounting
• Power: 24V
• No need for separate transformer or adapter
• Frequency: 310 MHz
• Codes: 1,024 - set by dip switches
• Dimensions: 3" x 5.5" x 1.5" |
$30.75
|
|
MultiCode 109950
1-Channel Gate Receiver
• MultiCode or Stanley compatible
• Replaces MCS109930, MCS 109940, & MCS 109931
• Single Relay
• Supplied with whip antenna, 3' of coaxial cable & bulkhead
connector
• Auto voltage sensing
• Power: 12-24 VAC/VDC
• Dual Frequency: 300 MHz & 310 MHz
• Codes: 1,024 - set by dip switches
• Dimensions: 3.625" x 5.25" x 1.5" |
$52.25
|
|
Multicode 302850
2-Channel Gate Receiver
• MultiCode or Stanley compatible
• Replaces MCS 302801 & MCS 203102
• Two Relay
• Supplied with whip antenna, 3' of coaxial cable & bulkhead
connector
• Auto voltage sensing
• Power: 12-24VAC/VDC
• Dual Frequency: 300 MHz & 310 MHz
• Codes: 512- set by dip switches
• Dimensions: 3.625" x 5.25" x 1.5" |
$63.00
|
Transmitters |
 |
MultiCode
105015 1-Channel Visor Transmitter
• Test/operate LED
• Easy access to battery & dip switch
• Power:
9V battery
• Frequency: 310 MHz
• Codes: 1,024
- set by dip switches
• Dimensions: 3.75" x 2.5"
x .875" |
$16.95
|
 |
MultiCode
108210 1-Channel Key Ring Transmitter
• Test/operate
LED
• Molded-in hole to accept keychain or keyring
•
Supplied velcro strip for visor or dashboard mounting
•
Power: 12V battery
• Frequency: 310 MHz
• Codes:
1,024 - set by dip switches
• Dimensions: 2.5" x 1.5"
x .625" |
$21.00
|
 |
MultiCode
109410 2-Channel Visor Transmitter
• Test/operate
LED
• Easy access to battery & dip switch
•
Power: 9V battery
• Frequency: 310 MHz
• Codes:
1,024 - set by dip switches
• Dimensions: 3.75" x 2.5"
x .875" |
$22.25
|
 |
MultiCode
109710 4-Channel Visor Transmitter
• Test/operate
LED
• Easy access to battery & dip switch
•
Power: 9V battery
• Frequency: 310 MHz
• Codes:
512 each set of dip switches
• Dimensions: 3.75" x
2.5" x .875" |
$25.50
|
 |
MultiCode 308302
2-Channel Key Ring Transmitter
• Test/operate LED
• Molded-in hole to accept keychain or keyring
• Supplied
velcro strip for visor or dashboard mounting
• Power: 12V
battery
• Frequency: 310 MHz
• Codes: 1,024 -
set by dip switches
• Dimensions: 2.5" x 1.5"
x .625" |
$27.00
|
Safety Edge Transmitter |
|
Multicode
105104 Safety Edge Transmitter
• For use with safety edges on gates & large commercial
doors
• Can be used where hard wires are impractical
• Easy to install & mount
• More economical than coil cord sets
• Power: 9 Volt battery supplied
• Frequency: 310 MHz
• Codes: 1,024 - set by dip switches
• Dimensions: 4"x 4.28" x 2.2" |
$89.00
|
Wireless Keypad |
|
MultiCode 298601 Wireless
Keypad
• Tamper-resistand & weatherproof
• Easy mounting with two screws
• 12-button, alphanumeric
keypad
• LED mode indicator
• Power: 9 Volt battery
supplied
• Frequency: 310 MHz
• Codes: 4-digit
PIN code access
• Dimensions: 2.75"x 6.25" x 1" |
$38.75
|
Antennas |
 |
Linear
106604 Rigid Local Antenna
• 9-inch solid wire antenna
• With type "F" connector & soft plastic connector
boot |
$7.20
|
 |
MultiCode
106603 Remote Whip Antenna
• Includes type "F" connector, whip antenna, bracket
& 15' coax cable
|
$36.75
|
Accessories |
 |
MultiCode
109201 Wiring Harness
• Three-position terminal strip kit for connection of 3-terminal
receivers to 2-terminal operators
• Includes wire leads with spade lugs & 24VAC transformer |
$9.50
|
 |
MultiCode
109206 3-Wire Adapter
• Three-conductor cable adapter for connecting a 3-terminal
operator with the operator terminals are not accessable for direct
mounting of the receiver or where the terminal sequence doesn't
conform to the DORCMA standard
• 3' cable with spade lugs |
$3.30
|
 |
MultiCode
109207 Wiring Harness
• Three-position wiring kit for connection of 3-terminal receivers
to 2-terminal operators
• Wire leads with spade lugs & 24VAC transformer included |
$7.70
|
New
Item! Linear Xtended Wireless System
|
|
Remote Controls |
|
|
|
|
|
|
 |
|
|
|
