DuraGate KIT-PAS-12-AS-SW Swing Gate & Automation Kit - Arch Top 12' Single w/ Platinum Access Operator
As low as $3,041.10
Product Details
This Complete Steel Driveway Gate with Automation Kit contains everything you need!
The Kit Includes:
- 1 - Single or Bi-Parting Steel Driveway Gate
- 2 - 4-3/4" x 4-3/4" x 9' Steel Posts with Caps
- 1 - Adjustable Hinge Kit (2 Brackets, Bearings, Hinge Pins & Bolts) - 2 Kits for Dual
- 1 - Gate Operator Mounting Bracket, Strap & Hardware Set - 2 Sets for Dual
- 1 - Positive Stop Kit - 2 Kits for Dual
- 1 - Platinum Access Systems ACTP715-SK Single or ACTP715-MSK Dual Linear Arm Gate Operator w/ 3.5-Year Limited Manufacturer Warranty
- 1 - Gray Powder-Coated Aluminum Control Board Enclosure w/ Mounting Brackets (15.5"H x 14.5"W x 6.5"D)
- 1 - Radio Receiver - LiftMaster 850LM w/ 15' Antenna Extension Kit - LiftMaster 86LM
- 2 - Remote 1-Button Visor Transmitters - LiftMaster 811LM
- 1 - UL325-2016 Compliant Seco-Larm E-936-S45RRGQ Reflective Photoelectric Beam Sensor
- 2 - "L" Mounting Brackets for Photo Beam & Reflector (E-931ACC-BLS7Q)
- 2 - 12V Sealed Lead Acid Batteries
- 40' - Primary/Secondary Wire for Dual Operator Connection
We have taken our years of experience and knowledge of the gate industry and applied it towards the design and construction of our residential / light industrial line of gates. Manufactured exclusively for Gate Depot, using our exacting specifications, these ready-to-ship steel gates are classical designs which offer security at a great price.
The driveway gate is paired with the Platinum Access Systems ACTP715, a high-end automatic, linear arm gate opener. This operator has a wide range of features comparable with top brand names such as a 24VDC instant reversing, continuous duty motor. The Platinum Access Systems ACTP715 is well engineered and fabricated out of high-grade material.
The control cabinet is constructed of durable, powder coated aluminum and the control board accommodates all standard gate accessories such as photo eyes, loop detectors, keypads, magnetic and electric locks, warning lights, landscape lights, and timers.
The Platinum Access Systems ACTP715 uses standard 120/220VAC power input and includes a step-down transformer to 24VDC for a solar ready installation. The 24VDC operating voltage enables the unit to operate during primary power failure using two 12V batteries (included).
The kit also includes a receiver, antenna, 2 visor style remotes and a photo beam sensor. Everything you need to automate your driveway gate!
IMPORTANT NOTICE / DISCLAIMER:
- Bi-parting gate individual leaf size may vary up to 1/4".- We do not recommend purchasing two single gates to be installed as one bi-parting gate; height may vary up to 1".
- There may be minor imperfections in the powder-coat finish. These will not affect the durability of the gate and if present, are not significantly noticeable.
- Before installing posts in concrete, MEASURE the gate to ensure it is square. Measure from corner to corner, then each end from top to bottom. Measurements should not vary more than 1/4" - 1/2".
- Gate width needs to be measured, then add 3-1/2" between posts for a single gate or 4" between posts for double gates.
- Measure All Gates Prior to Installation! Due to manufacturing variables, gates MAY vary in width by 1" - 2". Measure & confirm gate width PRIOR to setting posts.
- Shipping includes transporting the gate from our warehouse to the delivery address. It does NOT include lift gate service or unloading. Be prepared to unload the gate using a forklift with a boom or 3-4 people.
Gate Features:
- Heavy 2mm Wall on Frame and Stakes
- Hot Dip Galvanized Steel Tubing & Flat Bar
- Black Powder-Coat Finish
- Weep Holes to Prevent Internal Rust
Posts & Hinges:
- 4mm (5/32") Hot Dip Galvanized Steel
- Black Powder-Coat Finish
- Pre-Drilled Holes for Hinge Attachment
- Conduit Hole for Wiring
Platinum Access Systems ACPT715 Linear Arm Operator
- 700 Lbs x 15 Ft. Gate Capacity
- Continuous Duty, Instant Reversing 24VDC Motor
- 120/220 VAC Power Source or 24VDC Solar Ready
- Opens 90° in 21 - 25 Seconds / 120° Max
- 24VDC Battery Backup System - 2 7AH Batteries Included
- GOC-4000 Control Board with Input/Output LED?s
- Electronic Reversing Sensor Built into Control Board
- Solid State Motor Drivers - Provides quiet operation and longer product life
- Soft Start & Soft Stop - Minimizes wear on the gate system for longer life
- Fail Safe/Secure Capability - Ability to set fail-secure, fail-safe, or open on fail
- Built-In Mechanical Brake - Provides added security and keeps gate closed during heavy winds
- High Capacity DC BackUp - Up to 100 open/close gate cycles on DC backup using two 12V 5Ah batteries (Backup cycles vary depending on gate size)
- Adjustable Precision Limit Switches
- Adjustable Timer from 0-60 Seconds
- Built-In Surge Protection
- Advanced Maglock Control
- Alarm Reset Button
- Manual Key Release with Optional Fail Safety
- Selectable 120VAC/220VAC Power Input Source Switch
- 110VAC Output Outlet
- Dual Output Loop Detector Rack
- Charcoal Gray Powder-Coated Control Board Box
- Dual Includes 40 Ft. Master/Slave Wire
- ETL Listed, UL 325 and UL 991 Compliant
- -4°F to +158°F Operating Temperature
- 4-Year Limited Manufacturer Warranty
Access Control
- Receiver - LiftMaster 850LM
- 15' Antenna Extension Kit - LiftMaster 86LM
- 2 - Remote 1-Button Visor Transmitters - LiftMaster 811LM
- Seco-Larm E-936-S45RRGQ Enforcer Reflective Photoelectric Beam Sensor w/ Protective Hood
- 45 Ft. Range
- Weatherproof IP66 Housing
- Mounting Bracket w/Hardware Included
- Adjustable Sensing Range
- Compact Size
- ETL UL325-2016 Compliant
Gate Manufacturing Specifications:
(Imperial Measurements are approximate - Included for your convenience)
40 x 40 x 2 mm Tube (1-9/16" x 1-9/16" x 1/16")
Frame - Top Horizontal
40 x 30 x 2 mm Tube (1-9/16" x 1-3/16" x 1/16")
2nd Rail - Top & Bottom
30 x 5 mm Flat Bar (1-3/16" x 3/16")
Stakes (Pickets)
20 x 20 x 2 mm (3/4" x 3/4" x 1/16")
Brand | Duragate |
---|---|
Manufacturer Part Number | 12-AS-K |
Specifications | Gate Manufacturing Specifications : (Imperial Measurements are approximate - Included for your convenience) Frame - Sides & Bottom |
Showcased Accessories
- Loop Detectors
- Direct Burial / Pave-Over Loops
- Saw-Cut / Cut-In Loops
- Sensor Probes / Wands
- Loop Installation Tools & Supplies
- Retro-Reflective
- Through-Beam
- Safety Edges
- All Products
- Magnetic Locks
- Residential Telephone Entry & Access Control Systems
- Stand-Alone Keypads
- Stand-Alone Card Readers / Keypads / Intercoms
- Expansion & Add-On Components
- Radio Remotes
- Wire & Cable
- Garden & Pedestrian Gates
- Steel Fencing
- Gate & Fence Posts - Skeletons