Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout

DoorKing 1000-080 Back-up Power Inverter w/ Modified Sine Wave

Product Highlights:

• 1000 Watt, 9 Amp max
• Includes one battery
• Powers one 1/2hp gate operator
• Provides backup 120vac power for gate operators and access control systems
• 2 yr warranty
Modified sine wave for use with Doorking operators ONLY!
All Products Require a 3-5 Day Lead Time
MPN: 1000-080
SKU: DKS-1000-080

Recommended Accessories



DoorKing's Model 1000 Power Inverter and Backup system is designed to provide backup power for your vehicular gate operator and access control system when primary (AC) power fails. Unlike DC Gate Operators that can only back-up the gate operator itself with internal batteries to run the DC motor, the model 1000 converts DC battery power to AC power to keep all system components, even the ones that are powered by AC Accessory transformers, operable at all times. DC gate operators do not convert their battery power to AC rendering all AC components of your system inoperable.

The model 1000 can only be used with products that use a PSC (Permanent Split Capacitor) motor. Do NOT use the model 1000 on products that utilize a motor with start windings as the start-up amperage draw on this type of motor exceeds the maximum output available from the model 1000 and will cause damage to the inverter. The differences in these two types of motors is difficult to recognize, so we suggest that you contact the manufacturer to determine what type of motor is used in their product.


  • Selectable power out and power start options
  • Selectable continuous operation mode or quick open mode
  • Modified sine-wave or pure sine-wave output models are available
  • Electronic control circuit monitors battery voltage while system is in inverter mode and commands gate operators to open when battery power reaches critical levels
  • AC Output Voltage is 120 VAC, 60 Hz with ±10% regulation
  • Continuous Power Output is 1000 Watts
  • 1000-080 has a Modified Sine-Wave output and can power a single 1/2 HP gate operator system. Since this is a Modified Sine-Wave, this model should only be used with DKS gate operators as they have been designed to work within the limits of the Inverter's modified sine-wave
  • 1000-082 has a Pure Sine-Wave output and can power two 1/2 HP gate operator systems or a single 1 HP system
  • DC Input voltage is 10-15 VDC
  • Operating temperature 32°F (O°C) to 126°F (52°C)
  • Low battery alarm, low battery shutdown
  • Overload protection and Input short protection
  • Model 1000 uses 1 or 2 Maintenance Free, Rechargeable, Non-spillable, Sealed Lead-Acid (SLA), 12-Volt, 35 AH


Additional Info

Brand Doorking
Former Part Number No
Manufacturer Part Number 1000-080
Specifications No

titleManuals & Resources


Write Your Own Review

You're reviewing: DoorKing 1000-080 Back-up Power Inverter w/ Modified Sine Wave

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall Rating