Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout

DoorKing 6300-081 1/2 HP Secondary Swing Gate Operator

Product Highlights:

• Secondary Operator w/ 50' of Cable
All Products Require a 3-5 Day Lead Time
MPN: 6300-081
SKU: DKS-6300-081
$2,167.00

Recommended Accessories

titleOverview

Details

The unique configuration of these Operators allows the gate arm to rotate from underneath the Operator, enabling the arm to attach to the bottom rail of the gate, were it is virtually unseen from outside the gate. The fully enclosed Operators prevent water from contaminating the output shaft, bearings, and electronics. Additionally, the frame is built from G90 galvanized steel to prevent rusting. These Operators can be installed directly on a concrete pad, or post-mounted to meet any installation requirements.

With safety in mind, these Operators contain an electronic and mechanical inherent reverse system for two methods of obstruction detection. The automatic electronic limits, along with the microprocessor-based electronic control board provide advanced features not typically found in Operators in this class.

Features

  • Self-adjusting, no maintenance magnetic limits
  • Overlap feature for dual swing gate operation
  • Ports for plug-in loop detectors
  • Two convenience outlets
  • Fail-safe release
  • Tamper detect circuit
  • Gate tracker reporting output
  • Programming switches
  • Built-in reset switch
  • Built-in power On/Off switch
  • Maximum gate width 18-feet
  • Maximum gate weight 700 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • Swings gate 90 degrees in approximately 15-seconds
  • 1/2 HP continuous-duty motor
  • 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
  • Class I, II, III and IV applications
  • Compliant with UL 325 and 991. ETL Listed.

*Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment prevention devices need to be installed with this gate operator. Operator will not operate without entrapment devices.

titleSpecifications

Additional Info

Brand Doorking
Manufacturer Part Number 6300-081
Former Part Number No
Specifications No

titleACCESSORIES

Select Optional Accessories Below to Customize Your Equipment:

Showcased Accessories

  • All Products
  • Radio Remotes
  • Emergency Access
  • Radio Remote Accessories
  • Gate Operator Accessories
  • Surge Suppressors & Protectors
  • Sensor Probes / Wands
  • Through-Beam

titleManuals & Resources

titleReplacement Parts

DoorKing 2600-174 Main Shaft

GD# DKS-2600-174 MFR# 2600-174
• Replacement Main Shaft
• For 630 & 6300 Models
See More Details
$161.00

DoorKing 2600-644 Worm Gear 100 Tooth

GD# DKS-2600-644 MFR# 2600-644
• Replacement Delrin Main Drive Gear
• For 620, 625, 630 & 6300 Models
See More Details
$196.00

DoorKing 3004-010 Magnetic Counter Probe

GD# DKS-3004-010 MFR# 3004-010
• Magnetic Counter Probe
All Products Require a 3-5 Day Lead Time
See More Details
$152.00

DoorKing 4502-010 Circuit Board

GD# DKS-4502-010 MFR# 4502-010

• Call Us for Lower Price!

See More Details
$547.00

DoorKing 6300-042 Cross-shaft Cast Housing Assembly

GD# DKS-6300-042 MFR# 6300-042

• Call Us for Lower Price!

See More Details
$350.00

DoorKing 2600-102 Motor Capacitor

GD# DKS-2600-102 MFR# 2600-102
• Replacement Motor Capacitor
• For 6050 & 6100 Models
See More Details
$72.00

titleReviews

Write Your Own Review

You're reviewing: DoorKing 6300-081 1/2 HP Secondary Swing Gate Operator

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall Rating