Duragate Elegant Granite & Olive Gate

Our very best. Cracked granite in center of gate encrusted with hand wrought olive leaf motif on both sides. Gate starts at 6' high and ascends to 8' in the center. Beautifully crafted and now available at an affordable price. Matched niches available with granite and olive motif for use in columns. Contact us for detailed photos.

Available in powder coated verdigris only. Size is 14' wide bi-parting. Outer frame sides and bottom is 2"x2"x.120" tubular steel. The top rails are 1"x2"x.120 wall tubular steel. Stakes are 1"x1"x.095 wall tubular steel 5" OC (4" between stakes). Bottom panel is 1/8" thick. Gate weighs approximately 450 lbs. Due to the large size and difficulty of shipping granite, these gates are for local pickup only.

IMPORTANT NOTICE / DISCLAIMER:

— Bi-parting gate individual leaf size may vary up to 1/4".
— We do not recommend purchasing two single gates to be installed as one bi-parting gate; height may vary up to 1".
— There may be minor imperfections in the powder-coat finish. These will not affect the durability of the gate and if present, are not significantly noticeable.
— Before installing posts in concrete, MEASURE the gate to ensure it is square. Measure from corner to corner, then each end from top to bottom. Measurements should not vary more than 1/4" – 1/2".
— Gate width needs to be measured, then add 3-1/2" between posts for a single gate or 4" between posts for double gates. **Measurements do not apply to Cornerstone products.
— Measure All Gates Prior to Installation! Due to manufacturing variables, gates MAY vary in width by 1" – 2”. Measure & confirm gate width PRIOR to setting posts.
— Shipping includes transporting the gate from our warehouse to the delivery address. It does NOT include lift gate service or unloading. Please be prepared to unload the gate using either a forklift with a boom or 3-4 people.
— Gates, as shipped, are designed for use as a swing gate. All gates can be converted for use as slide gates by adding wheels, track and other hardware. Call us for more information on requirements.