Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout

DuraGate KIT-12X5-FD-SW Flat Top 12x5' Bi-Parting Swing Gate & Automation Kit

Product Highlights:

Complete Driveway Gate & Automation Kit
INCLUDES:

• Steel Driveway Gate w/ Black Powder Coat Finish
• 5 Ft. High
• Linear Arm Gate Operator w/4-Year Limited Warranty
• 24VDC Battery Backup System - 2 7AH Batteries Included
• Posts, Hinges, Receiver, Transmitters, Photo Eye & more!
• Optional Bolt-On Decorative Ornamentals
• FREE SHIPPING*
MPN: 12x5-FD-K
SKU: KIT-12X5-FD-SW-bundle

As low as: $3,728.00

Price as configured: $0.00

  • GD# DGT-12x5-fd MFR# 12X5-FD
    • 5' H x 12' W Bi-Parting Gate
    PRICE: $1,155.00
    • 5' H x 12' W Bi-Parting Gate
  •  
  • GD# KIT-SW-D MFR#
    • Automation & Hardware Kit
    PRICE: $2,573.00
    • Automation & Hardware Kit
  •  
Additional 2-Button Remote Transmitters
  • GD# PAS-rtc-2b MFR# RTC-2B
    • Secondary Transmitter
    MSRP: $13.06
    PRICE: $10.00
    • Secondary Transmitter
  •  
Personalize Your Gate!
  • GD# DGT-scroll-1 MFR# SCROLL-1
    • Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screws
    PRICE: $22.00
    • Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screws
  •  
  • GD# DGT-scroll-2 MFR# SCROLL-2
    • Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screws
    PRICE: $22.00
    • Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screws
  •  
  • GD# DGT-scroll-3 MFR# SCROLL-3
    • Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screws
    PRICE: $27.00
    • Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screws
  •  
  • GD# DGT-scroll-4 MFR# SCROLL-4
    • Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screw
    PRICE: $9.00
    • Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screw
  •  
For Extra Security Between Vertical Stakes. Can Be Finished with Spear Tips.
  • GD# DGT-PP MFR# PP
    • 23.5" H x 3/4" Square • Hot Dip Galvanized Steel • Black Powder Coat Finish • Finial Stub for Spear Tips • For Use with DuraGate Gates & Fencing
    PRICE: $6.00
    • 23.5" H x 3/4" Square • Hot Dip Galvanized Steel • Black Powder Coat Finish • Finial Stub for Spear Tips • For Use with DuraGate Gates & Fencing
  •  
If installing post top lighting fixtures, order these post caps with light collars. Includes 2 Post Caps w/ Light Collars.
  • GD# DGT-pcl-add MFR# PCL-ADD
    • Add-On for Gate Kits - Includes 2 Caps • Light Collar for Post Top Lighting • 120 x 120mm Square (4-3/4") • Cast Iron • Black Powder Coat Finish • Designed For Use with DGT-DP Posts
    PRICE: $55.00
    • Add-On for Gate Kits - Includes 2 Caps • Light Collar for Post Top Lighting • 120 x 120mm Square (4-3/4") • Cast Iron • Black Powder Coat Finish • Designed For Use with DGT-DP Posts
  •  

* Required Fields

Price as configured: $0.00

Recommended Accessories

titleOverview

Details

This Complete Steel Driveway Gate with Automation Kit contains everything you need!

The Kit Includes:

  • 1 - Single or Bi-Parting Steel Driveway Gate
  • 2 - 4-3/4" x 4-3/4" x 9' Steel Posts with Caps
  • 1 - Adjustable Hinge Kit (2 Brackets, Bearings, Hinge Pins & Bolts) - 2 Kits for Dual
  • 1 - Gate Operator Mounting Bracket, Strap & Hardware Set - 2 Sets for Dual
  • 1 - Positive Stop Kit - 2 Kits for Dual
  • 1 - Platinum Access Systems ACTP715-SK Single or ACTP715-MSK Dual Linear Arm Gate Operator w/ 4-Year Limited Warranty
  • 1 - Gray Powder-Coated Aluminum Control Board Enclosure w/ Mounting Bracket (15.5"H x 14.5"W x 6.5"D)
  • 1 - Radio Receiver (DCR-300)
  • 2 - Remote Key Chain Transmitters; 1 4-Button Master (RTM-4B) & 1 2-Button Secondary (RTC-2B)
  • 1 - UL325-2016 Compliant Photo Eye w/ Hood (E-936-S45RRGQ)
  • 2 - "L" Mounting Brackets (for Photo Eye & Hood) (E-931ACC-BLS7Q)
  • 2 - 12V Sealed Lead Acid Batteries
  • Dual Kit Includes 40 Ft. Master/Slave Wire

We have taken our years of experience and knowledge of the gate industry and applied it towards the design and construction of our residential / light industrial line of gates. Manufactured exclusively for Gate Depot, using our exacting specifications, these ready-to-ship steel gates are classical designs which offer security at a great price.

The driveway gate is paired with the Platinum Access Systems ACTP715, a high-end automatic, linear arm gate opener. This operator has a wide range of features comparable with top brand names such as a 24VDC instant reversing, continuous duty motor. The Platinum Access Systems ACTP715 is well engineered and fabricated out of high-grade material.

The control cabinet is constructed of durable, powder coated aluminum and the control board accommodates all standard gate accessories such as photo eyes, loop detectors, keypads, magnetic and electric locks, warning lights, landscape lights, and timers. It includes a receiver and 2 key chain style remotes.

The Platinum Access Systems ACTP715 uses standard 120/220VAC power input and includes a step-down transformer to 24VDC for a solar ready installation. The 24VDC operating voltage enables the unit to operate during primary power failure using two 12V batteries (included).

*FREE FREIGHT SHIPPING to 48 Contiguous States (Excludes Alaska & Hawaii) To qualify for this offer, any optional components listed within this kit must be purchased at the same time in a single order. No substitutions.

IMPORTANT NOTICE / DISCLAIMER:
- Bi-parting gate individual leaf size may vary up to 1/4”.
- We do not recommend purchasing two single gates to be installed as one bi-parting gate; height may vary up to 1".
- There may be minor imperfections in the powder-coat finish. These will not affect the durability of the gate and if present, are not significantly noticeable.
- Before installing posts in concrete, MEASURE the gate to ensure it is square. Measure from corner to corner, then each end from top to bottom. Measurements should not vary more than 1/4” - 1/2”.
- Gate width needs to be measured, then add 3-1/2” between posts for a single gate or 4” between posts for double gates.
- Measure All Gates Prior to Installation! Due to manufacturing variables, gates MAY vary in width by 1” - 2”. Measure & confirm gate width PRIOR to setting posts.
- Shipping includes transporting the gate from our warehouse to the delivery address. It does NOT include lift gate service or unloading. Be prepared to unload the gate using a forklift with a boom or 3-4 people.
- Gates, as shipped, are designed for use as a swing gate. All gates can be converted for use as slide gates by adding wheels, track and other hardware. Call us for more information on requirements.

Features

Gate Features:

  • Heavy 2mm Wall on Frame and Stakes
  • Hot Dip Galvanized Steel Tubing & Flat Bar
  • Black Powder-Coat Finish
  • Weep Holes to Prevent Internal Rust

Posts & Hinges:

  • 4mm (1/8”) Hot Dip Galvanized Steel
  • Black Powder-Coat Finish
  • Pre-Drilled Holes for Hinge Attachment
  • Conduit Hole for Wiring

Platinum Access Systems ACPT715 Linear Arm Operator

  • 700 Lbs x 15 Ft. Gate Capacity
  • Continuous Duty, Instant Reversing 24VDC Motor
  • 120/220 VAC Power Source or 24VDC Solar Ready
  • Opens 90° in 21 - 25 Seconds / 120° Max
  • 24VDC Battery Backup System - 2 7AH Batteries Included
  • GOC-4000 Control Board with Input/Output LED?s
  • Electronic Reversing Sensor Built into Control Board
  • Solid State Motor Drivers - Provides quiet operation and longer product life
  • Soft Start & Soft Stop - Minimizes wear on the gate system for longer life
  • Fail Safe/Secure Capability - Ability to set fail-secure, fail-safe, or open on fail
  • Built-In Mechanical Brake - Provides added security and keeps gate closed during heavy winds
  • High Capacity DC BackUp - Up to 100 open/close gate cycles on DC backup using two 12V 5Ah batteries (Backup cycles vary depending on gate size)
  • Adjustable Precision Limit Switches
  • Adjustable Timer from 0-60 Seconds
  • Built-In Surge Protection
  • Advanced Maglock Control
  • Alarm Reset Button
  • Manual Key Release with Optional Fail Safety
  • Selectable 120VAC/220VAC Power Input Source Switch
  • 110VAC Output Outlet
  • Dual Output Loop Detector Rack
  • Charcoal Gray Powder-Coated Control Board Box
  • Dual Includes 40 Ft. Master/Slave Wire
  • ETL Listed, UL 325 and UL 991 Compliant
  • -4°F to +158°F Operating Temperature
  • 4-Year Limited Warranty

Access Control

  • Receiver w/ Learn Button Programming (DCR-300)
  • One 4-Button Master (RTM-4B) & One 2-Button Secondary (RTC-2B) Key Chain Style Remote Transmitters
  • Seco-Larm E-936-S45RRGQ Enforcer ReflectivePhotoelectric Beam Sensor w/ Protective Hood
    • 45' Range
    • Weatherproof IP66 Housing
    • Mounting Bracket w/Hardware Included
    • Adjustable Sensing Range
    • Compact Size
    • ETL UL325-2016 Compliant

Gate Manufacturing Specifications :
(Imperial Measurements are approximate - Included for your convenience)

Frame - Sides & Bottom
40 x 40 x 2 mm Tube (1-9/16" x 1-9/16" x 1/16")
Frame - Top Horizontal
40 x 30 x 2 mm Tube (1-9/16" x 1-3/16" x 1/16")
2nd Rail - Top & Bottom
30 x 5 mm Flat Bar (1-3/16" x 3/16")
Stakes (Pickets)
20 x 20 x 2 mm (3/4" x 3/4" x 1/16")

titleSpecifications

Additional Info

Brand Duragate
Former Part Number No
Manufacturer Part Number 12x5-FD-K
Specifications No
Gate Width / Length No
Gate Style No

titleACCESSORIES

Our DuraGate line of Garden Gates and Fencing coordinates flawlessly with our Driveway Gates. Fence Sections and Pedestrian Gates also accept our exclusive line of bolt-ornamental scroll work to create your own custom design.

Showcased Accessories

  • All Products
  • Garden & Pedestrian Gates
  • Steel Fencing

titleManuals & Resources

titleReviews

Write Your Own Review

You're reviewing: DuraGate KIT-12X5-FD-SW Flat Top 12x5' Bi-Parting Swing Gate & Automation Kit

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall Rating