DuraGate KIT-PAS-14X5-FD-SW Swing Gate & Automation Kit - Flat Top 14x5' Bi-Parting w/ Platinum Access Operator

Complete Driveway Gate & Automation Kit INCLUDES: • Steel Driveway Gate w/ Black Powder Coat Finish • 5 Ft. High • Linear Arm Gate Operator w/3.5-Year Limited Manufacturer Warranty • 24VDC Battery Backup System - 2 7AH Batteries Included • Posts, Hinges, Receiver, Transmitters, Photo Eye & more! • Optional Bolt-On Decorative Ornamentals
MPN: 14x5-FD-K

As low as $4,172.60

SKU
KIT-pas-14x5-fd-sw-bundle
Customize DuraGate KIT-PAS-14X5-FD-SW Swing Gate & Automation Kit - Flat Top 14x5' Bi-Parting w/ Platinum Access Operator
DGT-14x5-fd 14X5-FD
• Automation & Hardware Kit for Bi-Parting Gates • Not Available for Purchase Separately
KIT-sw-d-actp715
• Surface or Pedestal Mount • 5 Permanent / 10 Temporary PINs • Up to 500' Range • 310/315/390 MHz • Security+ 2.0 Compatible • Housing NEMA 3R / Electronics NEMA 4X • Backlit Keys
LFM-kpw5 KPW5
• 42" High with 12" Throw (1066 x 310mm) • Includes Base Plate Cover • Black Powder Coat Finish
DGT-gn-ped GN-PED
• 66" High with 12" Throw (1676 x 310mm) • Pre-Cut Conduit Hole • Black Powder Coat Finish
DGT-gn-post GN-POST
• 1-Button Visor Style • 310/315/390 MHz • Security+ 2.0 • 12 position DIP Switch
LFM-811lm 811LM
EMX-2805-1 EMX-2805-1
Personalize Your Gate!
• Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screws • 14" x 5" x 8-1/2" (approx)
DGT-scroll-1 SCROLL-1
• Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screws • 9" x 8-1/2" (approx)
DGT-scroll-2 SCROLL-2
• Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screws • 16-½" x 8-1/2" (approx)
DGT-scroll-3 SCROLL-3
• Hand Forged Cast Iron • Black Powder Coat Finish • Includes Self-Drilling Screws • 4-1/2" x 6-1/2" (approx)
DGT-scroll-4 SCROLL-4
For Extra Security Between Vertical Stakes. Can Be Finished with Spear Tips.
• 23.5" H x 3/4" Square • Hot Dip Galvanized Steel • Black Powder Coat Finish • Finial Stub for Spear Tips • For Use with DuraGate Gates & Fencing
DGT-PP PP
• Cast Iron • Black Powder Coat Finish • For Use With DGT Series Gates
DGT-spear-tip-1 SPEAR-TIP-1
• Cast Iron • Black Powder Coat Finish • For Use With DGT Series Gates
DGT-spear-tip-2 SPEAR-TIP-2
• Cast Iron • Black Powder Coat Finish • For Use With DGT Series Gates
DGT-spear-tip-3 SPEAR-TIP-3

* Required Fields

Your Customization
DuraGate KIT-14X5-FD-SW Flat Top 14x5' Bi-Parting Swing Gate & Automation Kit
DuraGate KIT-PAS-14X5-FD-SW Swing Gate & Automation Kit - Flat Top 14x5' Bi-Parting w/ Platinum Access Operator

In stock

$1,225.00

Summary

    Product Details

    This Complete Steel Driveway Gate with Automation Kit contains everything you need!

    The Kit Includes:

    • 1 - Single or Bi-Parting Steel Driveway Gate
    • 2 - 4-3/4" x 4-3/4" x 9' Steel Posts with Caps
    • 1 - Adjustable Hinge Kit (2 Brackets, Bearings, Hinge Pins & Bolts) - 2 Kits for Dual
    • 1 - Gate Operator Mounting Bracket, Strap & Hardware Set - 2 Sets for Dual
    • 1 - Positive Stop Kit - 2 Kits for Dual
    • 1 - Platinum Access Systems ACTP715-SK Single or ACTP715-MSK Dual Linear Arm Gate Operator w/ 3.5-Year Limited Manufacturer Warranty
    • 1 - Gray Powder-Coated Aluminum Control Board Enclosure w/ Mounting Brackets (15.5"H x 14.5"W x 6.5"D)
    • 1 - Radio Receiver - LiftMaster 850LM w/ 15' Antenna Extension Kit - LiftMaster 86LM
    • 2 - Remote 1-Button Visor Transmitters - LiftMaster 811LM
    • 1 - UL325-2016 Compliant Seco-Larm E-936-S45RRGQ Reflective Photoelectric Beam Sensor
    • 2 - "L" Mounting Brackets for Photo Beam & Reflector (E-931ACC-BLS7Q)
    • 2 - 12V Sealed Lead Acid Batteries
    • 40' - Primary/Secondary Wire for Dual Operator Connection

    We have taken our years of experience and knowledge of the gate industry and applied it towards the design and construction of our residential / light industrial line of gates. Manufactured exclusively for Gate Depot, using our exacting specifications, these ready-to-ship steel gates are classical designs which offer security at a great price.

    The driveway gate is paired with the Platinum Access Systems ACTP715, a high-end automatic, linear arm gate opener. This operator has a wide range of features comparable with top brand names such as a 24VDC instant reversing, continuous duty motor. The Platinum Access Systems ACTP715 is well engineered and fabricated out of high-grade material.

    The control cabinet is constructed of durable, powder coated aluminum and the control board accommodates all standard gate accessories such as photo eyes, loop detectors, keypads, magnetic and electric locks, warning lights, landscape lights, and timers.

    The Platinum Access Systems ACTP715 uses standard 120/220VAC power input and includes a step-down transformer to 24VDC for a solar ready installation. The 24VDC operating voltage enables the unit to operate during primary power failure using two 12V batteries (included).

    The kit also includes a receiver, antenna, 2 visor style remotes and a photo beam sensor. Everything you need to automate your driveway gate!

    IMPORTANT NOTICE / DISCLAIMER:

    - Bi-parting gate individual leaf size may vary up to 1/4".
    - We do not recommend purchasing two single gates to be installed as one bi-parting gate; height may vary up to 1".
    - There may be minor imperfections in the powder-coat finish. These will not affect the durability of the gate and if present, are not significantly noticeable.
    - Before installing posts in concrete, MEASURE the gate to ensure it is square. Measure from corner to corner, then each end from top to bottom. Measurements should not vary more than 1/4" - 1/2".
    - Gate width needs to be measured, then add 3-1/2" between posts for a single gate or 4" between posts for double gates.
    - Measure All Gates Prior to Installation! Due to manufacturing variables, gates MAY vary in width by 1" - 2". Measure & confirm gate width PRIOR to setting posts.
    - Shipping includes transporting the gate from our warehouse to the delivery address. It does NOT include lift gate service or unloading. Be prepared to unload the gate using a forklift with a boom or 3-4 people.

    Gate Features:

    • Heavy 2mm Wall on Frame and Stakes
    • Hot Dip Galvanized Steel Tubing & Flat Bar
    • Black Powder-Coat Finish
    • Weep Holes to Prevent Internal Rust

    Posts & Hinges:

    • 4mm (5/32") Hot Dip Galvanized Steel
    • Black Powder-Coat Finish
    • Pre-Drilled Holes for Hinge Attachment
    • Conduit Hole for Wiring

    Platinum Access Systems ACPT715 Linear Arm Operator

    • 700 Lbs x 15 Ft. Gate Capacity
    • Continuous Duty, Instant Reversing 24VDC Motor
    • 120/220 VAC Power Source or 24VDC Solar Ready
    • Opens 90° in 21 - 25 Seconds / 120° Max
    • 24VDC Battery Backup System - 2 7AH Batteries Included
    • GOC-4000 Control Board with Input/Output LED?s
    • Electronic Reversing Sensor Built into Control Board
    • Solid State Motor Drivers - Provides quiet operation and longer product life
    • Soft Start & Soft Stop - Minimizes wear on the gate system for longer life
    • Fail Safe/Secure Capability - Ability to set fail-secure, fail-safe, or open on fail
    • Built-In Mechanical Brake - Provides added security and keeps gate closed during heavy winds
    • High Capacity DC BackUp - Up to 100 open/close gate cycles on DC backup using two 12V 5Ah batteries (Backup cycles vary depending on gate size)
    • Adjustable Precision Limit Switches
    • Adjustable Timer from 0-60 Seconds
    • Built-In Surge Protection
    • Advanced Maglock Control
    • Alarm Reset Button
    • Manual Key Release with Optional Fail Safety
    • Selectable 120VAC/220VAC Power Input Source Switch
    • 110VAC Output Outlet
    • Dual Output Loop Detector Rack
    • Charcoal Gray Powder-Coated Control Board Box
    • Dual Includes 40 Ft. Master/Slave Wire
    • ETL Listed, UL 325 and UL 991 Compliant
    • -4°F to +158°F Operating Temperature
    • 4-Year Limited Manufacturer Warranty

    Access Control

    • Receiver - LiftMaster 850LM
    • 15' Antenna Extension Kit - LiftMaster 86LM
    • 2 - Remote 1-Button Visor Transmitters - LiftMaster 811LM
    • Seco-Larm E-936-S45RRGQ Enforcer Reflective Photoelectric Beam Sensor w/ Protective Hood
      • 45 Ft. Range
      • Weatherproof IP66 Housing
      • Mounting Bracket w/Hardware Included
      • Adjustable Sensing Range
      • Compact Size
      • ETL UL325-2016 Compliant

    Gate Manufacturing Specifications:
    (Imperial Measurements are approximate - Included for your convenience)

    Frame - Sides & Bottom
    40 x 40 x 2 mm Tube (1-9/16" x 1-9/16" x 1/16")
    Frame - Top Horizontal
    40 x 30 x 2 mm Tube (1-9/16" x 1-3/16" x 1/16")
    2nd Rail - Top & Bottom
    30 x 5 mm Flat Bar (1-3/16" x 3/16")
    Stakes (Pickets)
    20 x 20 x 2 mm (3/4" x 3/4" x 1/16")
    Specifiction
    Brand Duragate
    Manufacturer Part Number 14x5-FD-K
    Specifications

    Gate Manufacturing Specifications :
    (Imperial Measurements are approximate - Included for your convenience)

    Frame - Sides & Bottom
    40 x 40 x 2 mm Tube (1-9/16" x 1-9/16" x 1/16")
    Frame - Top Horizontal
    40 x 30 x 2 mm Tube (1-9/16" x 1-3/16" x 1/16")
    2nd Rail - Top & Bottom
    30 x 5 mm Flat Bar (1-3/16" x 3/16")
    Stakes (Pickets)
    20 x 20 x 2 mm (3/4" x 3/4" x 1/16")

    Our DuraGate line of Garden Gates and Fencing coordinates flawlessly with our Driveway Gates. Fence Sections and Pedestrian Gates also accept our exclusive line of bolt-ornamental scroll work to create your own custom design.


    Showcased Accessories

    • Loop Detectors
    • Direct Burial / Pave-Over Loops
    • Saw-Cut / Cut-In Loops
    • Sensor Probes / Wands
    • Loop Installation Tools & Supplies
    • Retro-Reflective
    • Through-Beam
    • Safety Edges
    • All Products
    • Magnetic Locks
    • Residential Telephone Entry & Access Control Systems
    • Stand-Alone Keypads
    • Stand-Alone Card Readers / Keypads / Intercoms
    • Expansion & Add-On Components
    • Radio Remotes
    • Wire & Cable
    • Garden & Pedestrian Gates
    • Steel Fencing
    • Gate & Fence Posts - Skeletons
    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account

    @ Copyright 2021 Gate Depot @ Martrano Enterprises, LLC All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronic, without the prior written consent of Gate Depot