Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout

EMX ULT-MVP Inductive Loop Detector - Single Channel

Product Highlights:

• Single Channel
• 9—60VDC, 12—240VAC
• Loop Fault, Pulse or Detect-On-Stop (DOS®)
• Automatic Sensitivity Boost (ASB)
• Delay & Normal/Infinite Presence
• Fail-Safe/Fail-Secure
• 2-Year Limited Warranty
SKU: EMX-ult-mvp

Recommended Accessories



The ULTRA-MVP multi-voltage vehicle loop detector combines small size with a 9VDC to 240VAC input range. Reduce inventory costs by stocking and transporting just one universal unit.

This detector features DETECT-ON-STOP™ or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.

The ULTRA-MVP provides two relay outputs — one for indicating vehicle presence and a second for loop fault or pulse on entry/pulse on exit, or DETECT-ON-STOP.


  • Sensitivity: 10 levels, 0-9
  • ULTRAMETER™ Display: Indicates optimum sensitivity level, 0-9 Diagnostic aid
  • Loop frequency: 4 settings (low, med-low, med-hi, high)
  • Loop inductance: 20—2000µH (Q factor > 5)
  • Grounded loop: Isolation transformer allows operation with poor quality loops
  • Automatic tuning: Detector tunes to loop on power-up and following frequency count function
  • Environmental tracking: Automatic compensation
  • Surge protection: Loop circuitry protected by surge suppressors
  • Presence relay: SPDT relay contacts (form C)
  • Output B relay: SPDT relay contacts (form C)
  • Contact rating (resistive load): 2A @ 30VDC, 0.5A @ 125VAC
  • Power / loop fault indicator: Green LED
  • Detect / frequency count indicator: Red LED
  • Detect-On-Stop: Requires vehicle to stop for a minimum of 1 second (1-2s typical)
  • ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
  • Power: 9—60 VDC (Max. 0.8 VA) 12—240 VAC (48—62Hz) (Max. 1.4 VA)
  • Operating current: 20mA standby / 50mA detect
  • Operating temperature: -40°C—82°C (-40°F—180°F) 0—95% relative humidity
  • Dimensions (L x W x H): 73mm (2.9") x 38mm (1.2") x 78mm (3.1")
  • Weight: 0.25 lbs. (113 g)
  • Housing: ABS plastic, IP30
  • Connections: Socket mount — 11 pin male (JEDEC B11-88)


Additional Info

Brand EMX
Manufacturer Part Number ULT-MVP
Former Part Number No
Specifications No


Select Optional Accessories Below to Customize Your Equipment:

Showcased Accessories

  • All Products
  • Direct Burial / Pave-Over Loops
  • Saw-Cut / Cut-In Loops
  • Loop Installation Tools & Supplies
  • Loop Detector & Loop Accessories

titleManuals & Resources


Write Your Own Review

You're reviewing: EMX ULT-MVP Inductive Loop Detector - Single Channel

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall Rating