Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout

EMX ULT-V2 Inductive Loop Detector - Plug-In

Product Highlights:

• Plug-In
• Single Channel
• 12VDC—24VDC
• Loop Fault, Pulse or Same as Output A
• Automatic Sensitivity Boost (ASB)
• Normal/Infinite Presence
• Fail-Safe/Fail-Secure
• 2-Year Limited Warranty
SKU: EMX-ult-v2

Recommended Accessories



The ULTRA-V2 vehicle loop detector combines small size with full-featured functionality in a plug-in module.

This plug-in style vehicle loop detector provides a solid-state output indicating vehicle presence. The second output can be used for presence, loop fault or pulse on entry/pulse on exit. In addition, the ULTRA-V2 has options for automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite and normal (5 min.) presence.

The ULTRA-V2 is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER™ display. Ten sensitivity settings allow for finer adjustment of the detection level and four frequency selections help to prevent crosstalk in multi-loop applications.

The ULTRA-V2 is compatible with a wide variety of gate operators, including:

  • Chamberlain/Elite SL3000,CSW200
  • Advanced Access Automation CSL2000, CSW2000, RSW1000
  • All-O-Matic SL100DC, SL 150DC, OH 200DC, SW 300DC, SW350DC
  • Intelligate Systems IQ500, IQ5000
  • Linear (OSCO) SL & SW Series with APeX controller
  • SECOM Late model operators with 10 pin Molex connectors
  • Viking Access Models L-3, F-1, T-21, H-10, B-12, Q-4


  • Sensitivity: 10 levels, 0-9
  • UltraMETER™ Display: Indicates optimum sensitivity level, 0-9 Diagnostic aid
  • Loop frequency: 4 settings (low, med-low, med-hi, high)
  • Loop inductance: 20—2000µH (Q factor > 5)
  • Grounded loop: Isolation transformer allows operation with poor quality loops
  • Automatic tuning: Detector tunes to loop on power-up and following frequency count function
  • Environmental tracking: Automatic compensation
  • Surge protection: Loop circuitry protected by surge suppressors
  • Detect output: Solid-state
  • Output B: Solid state
  • Output B inverted: Solid state
  • Power / loop fault indicator: Green LED
  • Detect / frequency count indicator: Red LED
  • ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
  • Power: 12VDC—24VDC
  • Operating Current: 15 mA
  • Operating temperature: -40°C—82°C (-40°F—180°F) 0—95% relative humidity
  • Dimensions (L x W x H): 3.0"(76mm) x 0.9"(22mm) x 2.75"(70mm)
  • Weight: 0.15 lbs. (68 g)
  • Connector: 10-pin female


Additional Info

Brand EMX
Manufacturer Part Number ULT-V2
Former Part Number No
Specifications No


Select Optional Accessories Below to Customize Your Equipment:

Showcased Accessories

  • All Products
  • Direct Burial / Pave-Over Loops
  • Saw-Cut / Cut-In Loops
  • Loop Installation Tools & Supplies

titleManuals & Resources


Write Your Own Review

You're reviewing: EMX ULT-V2 Inductive Loop Detector - Plug-In

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall Rating