Guides & Rollers

Guide Rollers are Available in Three Common Lengths with a variety of offsets and either as individual rollers or as an assembly. 3" Rollers are guide for flat gates on level ground, 6" rollers should be used when the ground isn't completely level or there is a slight curve to the top of the gate, 12" rollers are reserved for gates with more pronounce curves such as arch top and bell curve gates. Rollers are typically made in either rubber or plastic. The rubber rollers are cheaper and also larger in diameter, they tend to leave marks on your gate, and will wear out quicker as they go through a few cycles of the seasons. The plastic type are made of high quality UHMW plastic which will not mar the gate and will typically last longer. You will most likely want to make sure that the roller also has bearings rather the just rolling on the bolt itself. If you choose to buy a premade assembly make sure that it is setup for the proper width of the material that you are using or buy an adjustable roller that can work with multiple sizes. On gates with curved tops you will also need to make sure that the curve is not so extreme as to hit the top of the assembly as it travels through, otherwise you may need to put one roller each on posts on either side of the gate, or fabricate your own roller assembly with the correct dimensions. Feel free to give us a call if you have other questions at (888) 818-4283.

Read More

Items 1-25 of 53

Set Descending Direction
  1. Doorking 1204-123 6-Inch Double Guide Roller View Manual
    DoorKing 1204-123 Adjustable Guide Roller Assembly - 6" UHMW / Black
    GD# DKS-1204-123 MFR# 1204-123
    • 6" Black UHMW Guide Roller Assembly
    • Adjustable From Bracket to Roller: 1.25" - 2.125"
    • Dual Adjustable Between Rollers: .875" - 2.625"
    • Includes mounting bracket
    • Meets UL 325 & ASTM F2200 Standards
    All Products Require a 3-5 Day Lead Time See More Details
    $202.00
  2. Doorking 1204-122 3-Inch Double Guide Roller View Manual
    DoorKing 1204-122 Adjustable Guide Roller Assembly - 3" UHMW / Black
    GD# DKS-1204-122 MFR# 1204-122
    • 3" Black UHMW Guide Roller Assembly
    • Adjustable From Bracket to Roller: 1.25" - 2.125"
    • Dual Adjustable Between Rollers: .875" - 2.625"
    • Includes mounting bracket
    • Meets UL 325 & ASTM F2200 Standards
    All Products Require a 3-5 Day Lead Time See More Details
    $167.00
  3. DoorKing 1204-120 3-Inch Single Guide Roller View Manual
    DoorKing 1204-120 Adjustable Guide Roller - Single 3" UHMW / Black
    GD# DKS-1204-120 MFR# 1204-120
    • 3" Black UHMW Single Guide Roller
    • Adjustable From Bracket to Roller: 1.25" - 2.125"
    • Dual Adjustable Between Rollers: .875" - 2.625"
    • Includes mounting bracket
    • Meets UL 325 & ASTM F2200 Standards
    All Products Require a 3-5 Day Lead Time See More Details
    $99.00
  4. DoorKing 1204-121 6-Inch Single Guide Roller View Manual
    DoorKing 1204-121 Adjustable Single Guide Roller - 6" UHMW / Black
    GD# DKS-1204-121 MFR# 1204-121
    • 6" Black UHMW Single Guide Roller
    • Adjustable From Bracket to Roller: 1.25" - 2.125"
    • Dual Adjustable Between Rollers: .875" - 2.625"
    • Includes mounting bracket
    • Meets UL 325 & ASTM F2200 Standards
    All Products Require a 3-5 Day Lead Time See More Details
    $109.00
Page
per page

@ Copyright 2021 Gate Depot @ Martrano Enterprises, LLC All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronic, without the prior written consent of Gate Depot