Pipe Track & Cantilever Gate Hardware
Cantilever Hardware is Typically Used For Chainlink Gates or in snowy areas where a gate running on a track may be obstructed. A chainlink gate will have a rolling gate wheel placed at the front to provide support when in the closed position, with a set of 4 pipe track wheels at the back end of the gate to keep the gate in line and provide support when in the open position. If you are building a heavier custom steel gate you will want to look at the Communelo Cantilever Gate Hardware distributed through Architectural Iron Design under the brand name Duragates. This system uses a "C" shaped cantilever track welded to the bottom of your gate with a set of 2 carriages that support the full weight of the gate when it is full extended in either direction. At the top of the gate you have a set of guide rollers holding the gate vertical in a similar fashion as a v-track style gate. They also sell a variety of catchers and support cups for either end of the gate. Because of the wide variety of weight and length possibilities on a custom gate it is important to properly engineer the foundation and the gate itself to support the final weight. Make sure to speak to an engineer.
-
DuraGate CWSQ Nylon Cantilever Roller - Square PostGD# DGT-cwsq MFR# CWSQ• 4" Square Post / 2" Square Track
• Includes Cover & Hardware See More Details$228.00 -
DuraGate CWRD Nylon Cantilever Roller - Round PostGD# DGT-cwrd MFR# CWRD• 4" Round Post / 2-3/8" Round Track
• Includes Cover & Hardware See More Details$229.00 -
Duragate PTW Pipe Track Wheel - 5" Light DutyGD# DGT-ptw MFR# PTW• Galvanized & Riveted Together
• For 1-5/8" o.d. pipe
• 5/8" dia x 5" bolt
• Bracket included See More Details$35.00 -
DuraGate DGT-WHEEL-CF Pipe Track Wheel - 5" SteelGD# DGT-wheel-cf MFR# WHEEL-CF• Cold Rolled Steel w/ Silver Zinc Plated Finish
• For 1-5/8" O.D. Pipe
• Sealed Bearings
• 3,000 Lbs.Weight Rating See More Details$93.00 -
Comunello DuraGates CGS-350.8G Cantilever Gate Hardware - Galvanized Steel / 4,050 LbsGD# COM-cgs-350.8g-bundle• 16' x 4,000 Lbs / 60' x 1,800 Lbs
• Grande Monobloc Carriage Body
• Heavy Duty 8 Wheel Carriage w/ Sealed Bearings
• 5-1/2" x 5-1/2" Galvanized Steel Track
• There is a 20% Restock Fee on all products See More Details -
Comunello DuraGates CGA-350.5P Cantilever Gate Hardware - Aluminum / 708 LbsGD# COM-cga-350.5p-bundle• 20' x 700 Lbs / 30' x 400 Lbs
• Large Monobloc Carriage Body
• 5 Wheel Carriage w/ Sealed Bearings
• 4-3/16" x 4-1/32" Aluminum Track
• There is a 20% Restock Fee on all products See More DetailsFrom $267.00
To $2,503.00
-
Comunello CGS-KIT150 Cantilever Small Gate Hardware Kit - 660 LbsGD# COM-cgs-kit150 MFR# CGS-KIT150• 8' x 660 Lbs / 13' x 330 Lbs
• Kit Includes:
• CGS-150.5M Mini Multiplate Carriage Body X 2
• CGS-245M Small Galvanized Track - 19'8"
• CGS-347M End Wheel X 1
• CGS-346M Bottom End Cup X 1
• 255-220 Top Guide w/ Roller Covers
• There is a 20% Restock Fee on all products See More Details$620.00 -
Comunello DuraGates CGS-350.5XL Cantilever Gate Hardware - Galvanized Steel / 7,700 LbsGD# COM-cgs-350.5xl-bundle• 30' x 7,700 Lbs / 65' x 4,400 Lbs
• Extra Large Monobloc Carriage Body
• 5 Wheel Carriage w/ Sealed Bearings
• 7-1/4" x 6-1/2" Galvanized Steel Track
• There is a 20% Restock Fee on all products See More DetailsFrom $1,417.00
To $3,010.00
-
Comunello DuraGates CGS-350.8P Cantilever Gate Hardware - Galvanized Steel / 1,700 LbsGD# COM-cgs-350.8p-bundle• 10' x 1,700 Lbs / 26' x 1,000 Lbs
• Large Monobloc Carriage Body
• 8 Wheel Carriage w/ Sealed Bearings
• 4" x 3-1/2" Galvanized Steel Track
• There is a 20% Restock Fee on all products See More Details -
Comunello DuraGates CGS-250.8M Cantilever Gate Hardware - Galvanized Steel / 900 LbsGD# COM-cgs-250.8m-bundle• 8' x 900 Lbs / 14' x 500 Lbs
• Small Multiplate Carriage Body
• 8 Wheel Carriage w/ Sealed Bearings
• 2-3/4" x 2-3/4" Galvanized Steel Track
• There is a 20% Restock Fee on all products See More DetailsFrom $208.00
To $1,539.00
-
Comunello DuraGates CGS-250.8P Cantilever Gate Hardware - Galvanized Steel / 1,300 LbsGD# COM-cgs-250.8p-bundle• 8' x 1,300 Lbs / 19' x 800 Lbs
• Large Multiplate Carriage Body
• 8 Wheel Carriage w/ Sealed Bearings
• 4" x 3-1/2" Galvanized Steel Track
• There is a 20% Restock Fee on all products See More DetailsFrom $359.00
To $2,061.00
-
Comunello DuraGates CGA-350.5M Cantilever Gate Hardware - Aluminum / 550 LbsGD# COM-cga-350.5m-bundle• 10' x 550 Lbs / 16' x 300 Lbs
• Small Monobloc Carriage Body
• 5 Wheel Carriage w/ Sealed Bearings
• 3-1/4" x 3-1/8" Aluminum Track
• There is a 20% Restock Fee on all products See More DetailsFrom $208.00
To $2,025.00
-
Comunello DuraGates CGI-350.5P Cantilever Gate Hardware - Stainless Steel / 880 LbsGD# COM-cgi-350.5p-bundle• 13' x 700 Lbs / 26' x 400 Lbs
• Large Monobloc Carriage Body
• 5 Wheel Carriage w/ Sealed Bearings
• 4" x 3-1/2" Stainless Steel Track
• There is a 20% Restock Fee on all products See More DetailsFrom $666.00
To $4,791.00
-
Comunello DuraGates CGS-500.8M Integrator Cantilever Gate Hardware - Galvanized Steel / 1,100 LbsGD# COM-cgs-500.8m-bundle• 23' or 1,100 Lbs
• Small Integrator Carriage Set
• Couples Gate Operator Directly to Carriage
• 8 Wheel Carriage w/ Internal Gear-Rack Drive System
• 2-11/16" x 2-11/16" Galvanized Steel Track
• For use with FAAC 844 ER Slide Gate Operator
• There is a 20% Restock Fee on all products See More DetailsFrom $704.00
To $2,889.00
-
Comunello DuraGates CGS-500.8P Integrator Cantilever Gate Hardware - Galvanized Steel / 1,760 LbsGD# COM-cgs-500.8p-bundle• 26' or 1,760 Lbs
• Large Integrator Carriage Set
• Couples Gate Operator Directly to Carriage
• 8 Wheel Carriage w/ Internal Gear-Rack Drive System
• 4" x 3-1/2" Galvanized Steel Track
• For use with FAAC 844 ER Slide Gate Operator
• There is a 20% Restock Fee on all products See More DetailsFrom $735.00
To $3,178.00
-
Comunello DuraGates CGS-500.8G Integrator Cantilever Gate Hardware - Galvanized Steel / 2,645 LbsGD# COM-cgs-500.8g-bundle• 52' or 2,645 Lbs
• Grande Integrator Carriage Set
• Couples Gate Operator Directly to Carriage
• 8 Wheel Carriage w/ Internal Gear-Rack Drive System
• 5-1/2" x 5-1/2" Galvanized Steel Track
• For use with FAAC 844 ER Slide Gate Operator
• There is a 20% Restock Fee on all products See More DetailsFrom $1,795.00
To $5,487.00
-
Comunello CG-05G Foundation PlateGD# COM-cg-05g MFR# CG-05G• Recommended for mounting carriage
• Prevents carriage from coming into direct contact with the ground
• Provides for a sturdier base and a more finished look
• For CGS-350.8G / CGS-500.8G
• There is a 20% Restock Fee on all products See More Details$159.00 -
Comunello CG-05P Foundation PlateGD# COM-cg-05p MFR# CG-05P• Recommended for mounting carriage
• Prevents carriage from coming into direct contact with the ground
• Provides for a sturdier base and a more finished look
• For CGA-350.5P / CGS-250.8P / CGS-350.8P / CGS-500.8M / CGS-500.8P
• There is a 20% Restock Fee on all products See More Details$97.00 -
Comunello CG-15G Mounting BracketGD# COM-cg-15g MFR# CG-15G• Mounting bracket
• Used to mount end cup and gate receiver to gate frame for UL325 compliance
• Adjustable
• For CGS-350.5XL / CGS-350.8G / CGS-500.8G
• There is a 20% Restock Fee on all products See More Details$162.00 -
Comunello CG-15M Mounting BracketGD# COM-cg-15m MFR# CG-15M• Mounting bracket
• Used to mount end cup and gate receiver to gate frame for UL325 compliance
• Adjustable
• For CGA-350.5M / CGS-500.8M
• There is a 20% Restock Fee on all products See More Details$158.00 -
Comunello CG-15P Mounting BracketGD# COM-cg-15p MFR# CG-15P• Mounting bracket
• Used to mount end cup and gate receiver to gate frame for UL325 compliance
• Adjustable
• For CGA-350.5P / CGI-350.5P / CGS-250.8P / CGS-350.8P / CGS-500.8P
• There is a 20% Restock Fee on all products See More Details$159.00 -
Comunello CGI-251 Adjustable Guiding Plate - 4" FrameGD# COM-cgi-251 MFR# CGI-251• For frames up to 4"
• There is a 20% Restock Fee on all products See More Details$353.00 -
Comunello CG-252 Single Guide RollerGD# COM-cg-252 MFR# CG-252• Single guide roller
• Use w/ 1-1/2" guide rail
• For arched top gates
• There is a 20% Restock Fee on all products See More Details$65.00 -
Comunello CG-30G Gate Receiver - 6"GD# COM-cg-30g MFR# CG-30G• Adjustable gate receiver &mdash: 4" to 6"
• Galvanized steel
• Nylon rollers reduce scraping finish
• Holds gate in position while closed
• There is a 20% Restock Fee on all products See More Details$165.00 -
Comunello CG-30M Gate Receiver - 3"GD# COM-cg-30m MFR# CG-30M• Adjustable gate receiver &mdash: 2" to 3"
• Galvanized steel
• Nylon rollers reduce scraping finish
• Holds gate in position while closed
• There is a 20% Restock Fee on all products See More Details$127.00