Column Mount Operators

Column Mount Operators are an Excellent Choice for any install with pillars or columns on the side and where the appearance is of primary importance but you want to avoid the inconvenience and difficulty of installing an underground operator. This style of operator is a good pick for bi-parting gates or dual swinging garage doors. This configuration is suitable for lighter weight gates with low usage, but should not be installed on a large gate or one with solid infill panels. We carry models from Platinum Access, Doorking, FAAC, and Viking Access. All models use a 24VDC motor with a set of batteries to provide backup power in case of power outage and house the control board in a separate cabinet from the motor itself. If you need help picking the right model for your install give us a call at (888) 818-4283.

 

Read More

4 Items

Set Descending Direction
  1. Platinum Access CM712 Column Mount Operator View Manual
    Platinum Access CM712 Column Mount Operator
    GD# PAS-cm712-bundle
    • 12' x 700
    • 115/230VAC Power Source or 24VDC Solar Compatible
    • 24VDC Operational Voltage
    • Opens 90° ~ 21-25 Seconds / 120° Max
    • Continuous Duty
    • 24VDC Battery Backup System w/ (2) 7-Ah Batteries
    • Up To 100 Full Cycles on Battery Backup Operation
    • 3-Year Residential / 2-Year Commercial Limited Manufacturer Warranty
    Additional Entrapment Prevention Devices REQUIRED
    See More Details

    From $1,191.00

    To $9,804.00

    Details
  2. Doorking 6004 Column Mount Operator View Manual
    Doorking 6004 Column Mount Operator
    GD# DKS-6004-bundle
    Choose Standard, Deluxe, or Solar Powered Control Box
    • 8' x 500 Lbs
    • 115 VAC Power Source or 24VDC Solar Ready
    • 24VDC Operational Voltage
    • Opens 90° in ~ 12" per Second
    • Maximum 100 Cycles per Day
    • 24VDC Battery Backup System w/ Batteries
    • Up To 1200 Full Cycles on Battery Backup Operation*
    • 2-Year Limited Manufacturer Warranty
    Additional Entrapment Prevention Devices REQUIRED
    MADE IN USA
    All Products Require a 3-5 Day Lead Time See More Details

    From $1,144.00

    To $4,835.00

    Details
  3. FAAC 390 Electromechanical Column Mount Swing Gate Operator View Manual
    FAAC 390 Electromechanical Column Mount Swing Gate Operator
    GD# FAC-390-bundle
    • 14' x 600 Lbs
    • 115VAC Power Source / 24VDC Operating Voltage
    • Opens 90° in ~ 12" per Second
    • Continuous Duty Cycle
    • 24VDC Battery Backup System w/ Batteries
    • Includes Receiver, 2 Transmitters & Photo Eye
    • 3-Year Limited Manufacturer Warranty
    All Products Require a 3-5 Day Lead Time See More Details

    From $1,647.00

    To $3,042.00

    Details
  4. Viking Access X390 Column Mount Gate Operator View Manual
    Viking Access X390 Column Mount Gate Operator
    GD# VKS-x390-bundle
    • 14' x 600 Lbs
    • 120/240VAC Power Source / 24VDC Operating Voltage
    • Opens 90° ~ 10 - 13 Seconds
    • Continuous Duty
    • 24VDC Battery Backup System w/ 2 Batteries
    • Up To 400 Full Cycles on Battery Backup Operation
    • Built-in Heater
    • Includes Receiver, 2 Transmitters & Photo Eye
    • 3-Year Limited Manufacturer Warranty
    All Products Require a 3-5 Day Lead Time See More Details

    From $1,780.00

    To $5,247.00

    Details
per page

@ Copyright 2021 Gate Depot @ Martrano Enterprises, LLC All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronic, without the prior written consent of Gate Depot