Platinum Access BLSL2250 Slide Gate Operator
From $1,500.00
To $3,674.00
Product Details
The BLSL2250 is the first choice for commercial slide gate applications because of its many features. First, this full feature, state-of-the-art operator is built with a high-efficiency, switching power supply, along with a powerful, ultra-quiet, high-torque, maintenance-free, brushless DC motor. The 120/220V AC power source is connected to a switching power supply, which can output a proper, stable voltage to the gate operator even when the input voltage is fluctuating.
The brushless DC motor does not need brushes replaced like conventional DC operators, so it is practically trouble free! Due to these inherent characteristics, the brushless DC motor lasts up to 10 time longer than the conventional brushed DC motor. A brushless DC motor?s typical life expectancy is 10,000 to 20,000 working hours, compared to the conventional brushed DC motor that has a life expectancy between 2,000 to 5,000 working hours.
Note. This BLSL2250 model can operate with a direct solar panel connection as an optional addition. We recommend using a bigger capacity battery like a 12V, 12Ah battery, if the operator is used in this fashion.
The operator is also equipped with a built-in 24VDC battery backup system that uses two 12V, 7Ah lead acid batteries. Normally this can supply more than enough power to keep the gate working until the AC Power return.
This operator is designed to operate in any climate:
- It does not require a gearbox or a battery heater to operate above –20°F.
- Temperatures –20°F and –40°F require a battery heater
- Temperatures below –40°F requires a gear box and battery heaters.
The optional chain routing under the sprocket is for extra chain clearance for non-raised pad mounting.
These unique engineering innovations are backed by the safety and reliability of the most advanced control board in the industry to ensure a smooth operation for any Platinum Access Systems operator.
*Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 (photo eye) and/or Type B2 (sensing edge) entrapment prevention devices must be installed or OPERATOR WILL NOT RUN.
- Continuous Duty
- Capacity 2,200 Lbs. / 50 ft
- Dynamic Speed Control – No speed variation when gate load changes and power switches between AC and battery. Slide gate works on slope without coasting
- Automatic Learning With Self Sync – Automatically synchronizes gates with different travel times for primary/secondary gate installation
- Solar Priority Power Supply – With a larger solar panel, the gate will run on the solar panel instead of the batteries when the sun light is sufficient, saving battery life
- Soft Start and Soft Stop – Minimizes wear on the gate system that significantly helps the gate last longer
- High Efficiency Brushless Motor – For smooth, high torque, and maintenance free operation
- Solid State Motor Drivers – For quiet and long lasting operation
- *High Capacity DC Backup – Over 100 Cycles on DC Backup Depending on Model & Gate Size - 2 7AmpHr 12VDC Batteries Included
- Advanced Maglock Control
- Dual Output Loop Detector Rack
- Individual Alarm for Primary/Secondary Installation
- Motor Brake & Maglock Release by FIRE/KEY Input
- One Controlled Power Supply Output for Photo Beam Detector
- Adjustable Leaf Delay
- Stackable Limit Switches
- Fail Safe / Secure Compatibility
- Heavy Duty Chassis with Weatherproof Polyethylene Cover
- Electronic Reversing Sensor Built Into Control Board
- Adjustable Timer 0 – 60 Seconds
- Surge Protection
- Alarm Reset Button
- Operating Temperature: -20°C (-4°F) to 70°C (158°F)
- *8-Year Motor / 8-Year Parts Manufacturer Warranty – Residential : 8-Year Motor / 6-Year Parts Manufacturer Warranty – Commercial
Brand | Platinum Access Systems |
---|
Showcased Accessories
- Residential Telephone Entry & Access Control Systems
- Stand-Alone Keypads
- Stand-Alone Card Readers / Keypads / Intercoms
- Expansion & Add-On Components
- Radio Remotes
- All Products
- Loop Detectors
- Direct Burial / Pave-Over Loops
- Saw-Cut / Cut-In Loops
- Sensor Probes / Wands
- Loop Installation Tools & Supplies
- Retro-Reflective
- Through-Beam
- Safety Edges
- Magnetic Locks
- Wire & Cable
-
10====
-
Platinum Access BLGOC-2200 Control BoardPAS-BLGOC-2200 BLGOC-2200• Main Control BoardSee More Details
• For BLSL840 / BLSL2250 / BLSW814 / BLSW1016$362.00
10==== -
Platinum Access BLGOC-2400 Control BoardPAS-blgoc-2400 BLGOC-2400• Main Control BoardSee More Details
• For BLSL840 / BLSL2250 / BLSW814 / BLSW1016$362.00
10==== -
Platinum Access BRBX-2250 GearboxPAS-brbx-2250 BRBX-2250• BLSL2250 GearboxSee More Details
• Size 60
• Ratio 1:25$290.00
10==== -
Platinum Access ID-WHL-SM Wheel - Idler PulleyPAS-id-whl-sm ID-WHL-SM• Idle Pulley WheelSee More Details
• For BLSL840 / BLSL2250$36.00
10==== - 10====
-
Platinum Access LMSW-BOX Limit Switch Box AssemblyPAS-lmsw-box LMSW-BOX• Slider Limit Switch Box AssemblySee More Details$109.00
10====
-
Platinum Access MOTOR-2250 MotorPAS-motor-2250 MOTOR-2250• BLSL2250 Brushless DC MotorSee More Details$456.00
10====
- 10====
-
Platinum Access PS-350 Power SupplyPAS-ps-350 PS-350• Power SupplySee More Details
• For BLSL2250 / BLSW1016$201.00
10==== -
Platinum Access SL120-GEARBOX-AND-MOTOR Gearbox & Motor AssemblyPAS-sl120-gearbox-and-motor SL120-GEARBOX-AND-MOTOR• SL120 Gearbox and Motor Assembly w/ Double sprocketSee More Details$521.00