Sensor Probes / Wands
Sensor Probes / Exit Wands are typically used on rough gravel roads that are not maintained regularly and on the side of already finished driveways where the preference is to avoid modifying the existing asphalt, concrete, or paver roadway. Because they can be placed on the side of the road rather than in the center of the roadway it can greatly reduce installation costs. Exit wands and driveway probes are typically used for opening the gate but not for controlling safety because the proximity to the gate may cause false triggers on the sensor wand. The more high tech units such as the CS303 by EMX can be used for safety because they allow you to control the detection radius on all three axis, however the added cost of the product may eat up any additional savings on the install costs. We carry wands at 50', 100', and 150' by brands such as EMX, Diablo, Liftmaster, MMTC, Linear, Apollo, and Eagle.
-
EMX CS303 Carsense 303 Magnetoresistive Probe Vehicle Detector
Choose Probe or Flat Pack Sensor Available with 50' or 100' Lead
• Two-Piece Probe Motion Detector
• 3-Axis Magnetoresistive Sensing
• Range: 5'
• Sensors: 12—30VDC
• Remote: 12—30VDC & 24VAC
• Sensors 10mA / Remote 40mA Maximum
• 2-Year Limited Warranty
• MADE IN USA
See More Details -
EMX CS202 Carsense 202 Probe Vehicle Motion Detector - Single Piece
Choose 50' to 200' Lead Lengths
• Single-Piece Probe Motion Detector
• Range: 12' @ 5MPH Minimum Speed
• 9—41VDC / 6—29VAC
• 0.250mA Stand-by / 12mA Detect Current
• 5-Wire Direct Burial Cable in Water-Tight PVC
• 2-Year Limited Warranty
• MADE IN USA
See More Details -
EMX VMD202 Probe Vehicle Motion Detector - Single Piece
Choose 50' or 100' Lead
• Single-Piece Probe Motion Detector
• Range: 12' @ 5MPH Minimum Speed
• 9—41VDC / 6—29VAC
• 0.250mA Stand-by / 12mA Detect Current
• 5-Wire Direct Burial Cable in Water-Tight PVC
• 10 Sensitivity Settings
• Can be used as a Free Exit Sensor
• 2-Year Limited Warranty
• MADE IN USA
See More Details -
Diablo DML-9LP Probe Style Vehicle Sensor Kit
• 10-30VDC
• Saw Cut Loop
• 5-Year Warranty
• Solar Friendly
• Easy to Install
• Veteran Owned & Operated
See More Details$222.00 -
Liftmaster CP3 Single Piece Sensing Probe
• Covers a 12' wide driveway
• Ideal for solar or battery backup operators
• 6-31VAC or 10-40VDC
• 100' Lead
• 1-3 Week Lead Time
See More Details$261.00 -
MMTC PT-3-100 Probe Style Loop Detector
• Above or Below Ground Installation
• Coverage for 12 ft Wide Driveway
• 100 ft Lead Wire
• Not Suitable as Safety Loop
• 8-35VDC/6-25VAC
See More Details$300.00 -
EMX CS101 Carsense 101 Probe Vehicle Motion Detector
Choose Low Voltage or 110VAC 50'—300' Probe Lead Lengths
• Easy to use and install
• Easy upgrade or switch out to new devices
• Quick access to controls
• Buried sensing probe protects against potential intruders
• Wide power supply options
• Energy conservation
• 2-Year Limited Warranty
• MADE IN USA
See More Details -
Linear Vehicle Probe Detectors
Available in 24VAC or 24VDC Choose 50', 100' or 150'
See More Details -
Apollo 217 Free Exit Probe & Detector Kit
• Includes 217P Probe & 217C Board
See More Details$363.00 -
Apollo 217C Probe Detector Board, 12VDC
• Probe Detector Board, 12VDC
See More Details$253.00 -
Apollo 217P Probe Only, 100' Lead
• Probe Only, 100' Lead
See More Details$226.00 -
Eagle EG240
• Carsense 101 Direct Burial Probe Sensor
See More Details$323.00 -
Apollo Free Exit Probe
Choose Kit, Probe, or Board
See More Details