Loops
Vehicle Loops and Loop Detectors are used to detect the presence of a vehicle to open a gate, or as a safety device to prevent the gate from closing on a vehicle in its path. Inductance Loops are available as Direct Burial or Cut-In. In general, direct burial loops are placed below the surface prior to application of asphalt or concrete while cut-in loops are installed within a slot sawed into the existing surface. We have preformed loops available in both styles as well as loop wire if you prefer to make your own loops. We also sell a nice selection of tools and sealants to help with the installation and troubleshooting of traffic loops. The sensor probes/wands are another way to open your gate automatically when leaving the property, they are not as reliable as loop detectors but they are easier to install because they can be placed on the side of the roadway rather than in the center. Exit wands/probes should not be used as safety devices. Visit Our Driveway Vehicle Detection - Loops & Loop Detectors in our DIY Learning Center for detailed instructions and diagrams.
Featured Products
-
BD Loops EL40-100 Preformed Direct Burial Exit Loop - 4' x 16' w/ 100' Lead
GD# BDL-el-40-100 MFR# EL40-100• 4' x 16' | 6' x 14' | 8' x 12'
• 100' Lead
• 16AWG loop wire
• Install under concrete, asphalt, gravel or pavers
• Includes cable ties, round stakes, & loop lead-in labels
• MADE IN USA
See More Details$238.00 -
Nice Apollo 217 Free Exit Probe & Detector Kit
GD# APL-217 MFR# 217$459.00 -
BD Loops E-Z Detector Checker
GD# BDL-e-z-checker MFR# E-Z-CHECKER• Easily Troubleshoot Loop System Problems
• No Batteries Required
• Compact
• MADE IN USA
See More Details$191.00 -
BD Loops Saw Cut Pizza Wheel & Wedge Installation Tool
GD# BDL-pr-3-16 MFR# PR-3/16• Designed for use with 3/16 preformed saw cut detection loops
• Smooth & durable PVC 1/8 thick
• Prevents nicks to loop wire casing
• Wedge fits 135 degree corner cuts
• 3/4 PVC Coupler accepts any length handle
• Wheel can be used to assist in cleaning out saw-cut groove
• MADE IN USA
See More Details$149.00 -
BD Loops SB-B7 Pro Diamond Saw Blade - Combo / 7"
GD# BDL-sb-b7 MFR# SB-B7$131.00 -
Q-SEAL 290S Loop Sealant
GD# QSL-sealant-bundleFrom $37.00 To $37.00 -
Reno A&E BR Backer Rod
GD# RAE-br-xxx-bundleChoose 3/8" or 1/2" Availabe in Rolls or Cut to Length
• Decreases the amount of loop sealant needed
• Provides a more secure way to keep loop wire down
• Cut Backer Rod is Sold in 10' Increments & Priced Per Foot
See More DetailsFrom $0.20 To $283.00 -
Duragate Loop Wire XLPE 18 Guage
GD# DGT-loop-wire-bundle18 Gauge XLPE Coated Loop Wire Available in 3 Lengths - 100' Roll, 50' Roll & Per Foot
• Narrow Gauge for Easier Installation
See More DetailsFrom $0.50 To $43.00 -
DoorKing Loop Wire Rolls
GD# DKS-9402-bundleAvailable in Red, Black, and Blue Choose 500 or 1000 Foot roll
• 18 AWG
• XLPE Insulation
• All Products Require a 3-5 Day Lead Time
See More DetailsFrom $244.00 To $649.00 -
EMX LRS Loop Replacement Vehicle Detection System
GD# EMX-2303-bundleAvailable w/ 50' & 100' Leads
• Three-dimensional presence detection of vehicles
• Easy installation above or below ground
• Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
• Quick setup with the ULTRAMETER™ sensitivity display
• Logic Interface available for extended detection range
• MADE IN USA
See More DetailsFrom $162.00 To $495.00 -
Eagle EG241-40 Preformed Saw Cut Loop - 4' x 8' w/ 40' Lead
GD# EGL-eg241-40 MFR# EG241-40$193.00 -
Eagle EG242-100 Preformed Direct Burial Loop - 4' x 8' w/ 100' Lead
GD# EGL-eg242-100 MFR# EG242-100$240.00 -
BD Loops BD-MEGGER Analog Megohmmeter Loop Tester
GD# BDL-bd-megger MFR# BD-MEGGER•Analog 0-600 AC Volt Meter & Megohmmeter/Insulation Tester
•Includes:
•Batteries
•Quick Start Instructions
•In-depth Instructions
•Testing Record Booklet
•Carrying Case
See More Details$156.00